Rough Country


5.5-inch Suspension Lift Kit

This is a spring over kit and will require more components depending on how the vehicle is expected to perform. This kit does require welding, therefore it is recommended to have this kit installed by a professional that is familiar with welding procedures. This kit is designed to move the leaf springs from the bottom of the axle to the top effectively giving lift to the vehicle and flexibility with the use of the stock springs.

Rough Country's 5.5-inch Suspension Lift Kit - 699

Welding is required; Longer shocks are required for this kit; CV type drive shaft is highly recommended; Stainless steel brake lines are recommended (Front: #89702 Rear: #89703); Steering will typically need a s-link system or high steer system

Manufacturer: Rough Country Suspension Systems; Part Number: 699; Weight (Lbs): 6.67; Install Time (Hours): 4-6; Wheel Backspacing (Inches): Factory; Recommended Tire Size: 35-by-12.50

Front: Lifted coil springs, fixed lower control arms, lower control arm drop brackets, pitman arm, track bar drop bracket w/uni-body brace, bumpstop extensions, transmission crossmember spacers, Premium N2.0 steering stabilizer, and hardware; Rear: Lifted coil springs, upper control arm bracket, sway bar brackets, bumpstop extensions, shock relocation kit, and hardware; Shocks: (4) Performance 2.2 Shocks

Front: (2) Weld on spring pads; Rear: (2) Weld on spring pads

Jeep: 99-04 Grand Cherokee WJ 4WD

Jeep: 87-95 Wrangler YJ 4WD