CV Front Drive Shaft (Dana 30 Front Axle Models) for SA 3.5-6-inch or LA 2.5-6-inch Lifts

This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5-6-inch short arm suspension lifts or 2.5-6-inch long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. Tom Woods designed this to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.

Rough Country's CV Front Drive Shaft (Dana 30 Front Axle Models) for SA 3.5-6-inch or LA 2.5-6-inch Lifts - 5096.1

Collapsed Length: 35.25-inches; Extended Length: 38.75-inches; Eliminates contact between the stock drive shaft and oil pan on automatic transmission models; After lifting your Jeep JK Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues; Includes Brute Force Red seals; Includes better quality CV joints; Shaft strength is twice as strong as the factory drive shaft; Grease fittings are out of way of the transmission oil pan

Fits Dana 30 front axle models only; Recommended on models with 3.5-6-inches of short arm lift or 2.5-6-inches of long arm lift

Manufacturer: Rough Country Suspension Systems; Part Number: 5096.1; Weight (Lbs): 27.2; Install Time (Hours): 2-3

Extended CV drive shaft, flanges/yokes, and hardware

Extended CV drive shaft, flanges/yokes, and hardware

Jeep: 07-18 Wrangler JK 4WD, 07-18 Wrangler Unlimited JK 4WD

Jeep: 07-18 Wrangler JK 4WD, 07-18 Wrangler Unlimited JK 4WD