OFFROAD AND DIESEL ENTHUSIASTS

0

Your Cart is Empty

Rough Country

5086.1

CV Rear Drive Shaft for 4-6-inch Lifts

This double cardan style CV drive shaft is recommended for 04-06 Jeep LJ (Unlimited) Rubicon models equipped with 4-6-inch suspension lifts to prevent driveline vibration and the rear output shaft from breaking. This drive shaft will flex to a nominal 30 degrees prior to binding, and is a direct bolt in replacement that does not require removing the factory original out-put mass vibration dampener hub. It is built on a 3-inch tube diameter and uses the stock 1330 sized universal joint at the rear differential end.

Rough Country's CV Rear Drive Shaft for 4-6-inch Lifts - 5086.1

Flexes to a nominal 30 degrees prior to binding; Direct bolt-in replacement; Does not require removing the factory original out-put mass vibration dampener hub; Includes better quality CV joints; Shaft strength is twice as strong as the factory equipped drive shaft; Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep

Fits Unlimited LJ "Rubicon" models only; Recommended on models with 4-6-inches of lift

Manufacturer: Rough Country Suspension Systems; Part Number: 5086.1; Weight (Lbs): 20; Install Time (Hours): 2-3

Extended CV drive shaft, flanges/yokes, and hardware

Extended CV drive shaft, flanges/yokes, and hardware

Jeep: 04-06 Wrangler Unlimited LJ 4WD

Jeep: 04-06 Wrangler Unlimited LJ 4WD

Warranty
Shipping: