New Products from Dunks Performance Store

AEV Fuel Caddy - JK (2007+ Wrangler)

Mon, 06 Feb 2012 21:29:22 +0000

Key Features: • 10.2 gallons • Tough, Cross-link polyethylene • Fully vented OE-quality cap with large fill opening • High mounting position isolates the Fuel Caddy from trail impacts • Built-in foot step on upper right side allows easier access to roof racks • Molded in, full-color decals

Price:$329.00

S&B Cold Air Intake Kit - '10-'12 Dodge Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

In 2010, Dodge made some changes to the engine compartment. While some say their '09 kits are 'close enough' with regards to fitment, 'close' does not meet S&B's standards which is why we developed a new kit that will give you that great fit you have come to expect along with unsurpassed performance. Since we manufacture almost everything in house, we are able to provide all this value for only $289.

Price:$289.00

aFe ATLAS Exhaust System Turbo Back- '99-'03 Ford Diesel Trucks V8-7.3L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. - Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. - Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. - Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. - Flow and Performance: ATLAS exhaust systems are constructed of mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. *NOTE: This is a "Race Only" product used soley for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.
Price:$324.95

aFe ATLAS Exhaust Muffler 4"ID Inlet/Outlet x 30" Overall Length

Mon, 06 Feb 2012 21:29:22 +0000

- Aluminized Steel - 4"ID Inlet/Outlet by 30" Overall Length - Features an embossed 5" aFe Power Logo

Price:$110.95

aFe Magnum FLOW OER Air Filter- '06-'12 Lexus

Mon, 06 Feb 2012 21:29:22 +0000

- Constructed with 100% polyurethane on all sides - Outflows the stock paper filter by up to 43% for improved horsepower and torque - Washable and reusable for multiple cleaning cycles - Features tall, open, evenly spaced pleats for excellent dust holding capacity and longer service cycle between cleanings - Pliable polyurethane with integrated bump seal insures tight, no leak seal over the life of the filter APPLICATIONS: - '07-'11 Lexus GS350 V6-3.5L - '06-'07 Lexus GS430 V8-4.3L - '06-'12 Lexus IS250/350 V6-2.5/3.5L Click for installation instructions

Price:$62.95

aFe MACH Force XP Exhaust Loop Delete/Y-Pipe Combo- '12 Jeep Wrangler V6-3.6L 4D

Mon, 06 Feb 2012 21:29:22 +0000

- True Merged Collector to create a smooth transition of exhaust gases as the two tubes are combined into one. This design increases exhaust velocity and eliminates the possibility of any turbulence that form collectors can cause - Accommodates Aftermarket Lift Kits – If you are going to lift your Jeep, you need to add this product. The OE loop tube on the driver's side comes into contact with aftermarket long arm travel kits. - Mandrel Bent Tubing – Mandrel bent tubing allows for smooth transitions of exhaust gas increasing exhaust velocity, increasing horsepower, torque and improving throttle response. *Note: Fits 4-Door Jeep Wrangler JK only. Click for installation instructions
Price:$366.95

aFe ATLAS Exhaust System Turbo Back- '94-'97 Ford diesel trucks V8-7.3L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. - Leak-Free Seal: High quality OE style band clamps are used for a complete 360 sealing surface. - Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. - Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. - Flow and Performance: ATLAS exhaust systems are constructed of mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. *Note: This is a "Race Only" product used soley for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.

Price:$324.95

aFe ATLAS Exhaust System Turbo Back- 94-02 Dodge Diesel Trucks L6-5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Installation is a Snap:ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. - Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. - Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. - Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. - Flow and Performance: ATLAS exhaust systems are constructed of mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. *Note: This is a "Race Only" product used soley for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.

Price:$324.95

aFe MACH Force XP Down Pipe (Loop Delete Down Pipe)- '12 Jeep Wrangler V6-3.6L

Mon, 06 Feb 2012 21:29:22 +0000

- Accepts either the stock "Y-Pipe" or aFe MACH Force XP "Y-Pipe" - Specifically designed and engineered to accept long arm travel lift kits that interfere with the OE loop - features 2.5" stainless steel mandrel-bent tubing and all necessary hardware - Cutting is required Click for installation instructions

Price:$135.00

aFe ATLAS Exhaust System Down-Pipe Back- '08-'10 Ford Diesel Trucks V8-6.4L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. - Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. - Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. - Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. - Flow and Performance: ATLAS exhaust systems are constructed of mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. *Note: This is a "Race Only" product used soley for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.

Price:$324.95

Smittybilt Winch Cradle

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured out of the 3/16" & 1/4" cold-rolled steel - Fits any standard 2" receiver hitch - Finished in a two-stage satin black powdercoat - Will fit the majority of all winches on the market today - Includes mounting plate for the roller fairlead - Battery terminals sold separately

Price:$235.95

Smittybilt Low Profile 4-Way Roller Fairlead for 8K-15K Winches

Mon, 06 Feb 2012 21:29:22 +0000

- The Low Profile size provides better clearance for mounting - Mounts directly to all standard winch mounting plates - Reduces excessive wear on your winch cable or wire rope

Price:$49.99

Nitro's Dana 30/Dana 44 Tube Sleeves

Mon, 06 Feb 2012 21:29:22 +0000

- These are the only sleeves on the market that accept 35 spline shafts, so when the OE Rubicon locker breaks you’re not stuck replacing it with another weak factory locker - Doesn't require welding - Installs in 45 minutes or less INSTALLATION: Simply insert the sleeve into the axle housing knurled end out, and evenly hammer the sleeves into the housing until the ends of the sleeves are flush with factory axle tube end. (Use of an aluminum puck or bearing race/seal driver set will be necessary to avoid “mushrooming” to sleeve end)

Price:$119.95

Nitro's Knuckle Gusset Kit w/ Lower Control Arm skids

Mon, 06 Feb 2012 21:29:22 +0000

Knuckle Gusset Kits with Lower Control Arm Skids

Price:$109.95

Pro Comp Single Steering Stabilizer Kit- '02-'08 Dodge 2500/3500

Mon, 06 Feb 2012 21:29:22 +0000

- Includes Single Pro Comp ES2000 Stabilizer Shock - All Necessary Brackets included

Price:$157.95

Mag-Hytec Dana 60 High Capacity Differential Cover- '89-'02 Dodge 2500/3500

Mon, 06 Feb 2012 21:29:22 +0000

- Holds 2 Extra Quarts Of Oil - Overall Height Is 3 5/8" - Finned aircraft aluminum housing for improved cooling - Offers easy routine maintenance without removing the differential cover - Dipstick with magnetic insert - Fitted with ARP 568 O-rings for superior sealing - All hardware is 303 stainless steel - In most applications no gasket or sealant is required - All Mag-Hytec parts are covered by a lifetime limited warranty

Price:$273.95

$39 REBATE!!! S&B Airflow Package- '98-'02 L6-5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Includes Cold Air Intake kit (75-5044) & Intake Elbow (76-1001) *NOTE: For '98, kit ONLY works the 24 valve

Price:$549.00

$40 REBATE or FREE DASH MOUNT! Edge Juice with Attitude CS- '06-'07 Dodge 5.9L 610 Series

Mon, 06 Feb 2012 21:29:22 +0000

FEATURES • 6 On-the-Fly Adjustable Power Levels* • Full-color, high-resolution, 2.4 inch button-controlled screen (CS) • Up to an Additional 160 HP and 350 ft lb Torque* • Increase Fuel Economy* • Greatly Improves Drivability • Enhances Towing Performance • Excellent Throttle Response • Easy Instillation • Ships with a universal suction cup mount • Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately) • Includes light sensitivity meter to dim screen as ambient light decreases • Internet Updateable (Attitude only) • Hot Unlock Codes available to unlock additional performance (additional fee and waiver required) Level 0: Stock Level 1: 25 Horsepower - 80 Foot Pounds of Torque Level 2: 40 Horsepower - 120 Foot Pounds of Torque Level 3: 60 Horsepower - 150 Foot Pounds of Torque Level 4: 80 Horsepower - 200 Foot Pounds of Torque Level 5: 100 Horsepower - 250 Foot Pounds of Torque Level 6: 160 Horsepower – 350 Foot Pounds of Torque** Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form. GAUGES When used with the Attitude CS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time. • Boost • EGT • Barametric PSI • Power Level • Speed MPH • Engine Coolant Temperature • Gear • Intake Air Temperature • Load% • Slip % • Transmission Temperature • Throttle% • RPM • Percent Backdown due to high EGT or Boost SAFETY FEATURES • Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip* • Turbo Timer* (allows turbo to cool before truck shuts off) • Cold Engine Protection (no extra fuel is added until the engine is warm) • User-Adjustable Audible Alert Settings IMPROVED DRIVEABILITY FEATURES • Low-Boost Fueling Adjustment • Shift Defuel Setting* PERFORMANCE TESTING, ALERTS & RECORDS Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters. EXPANDABLE (items sold separately) • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories MYSTYLE™ SOFTWARE (included) MyStyle™ software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.

Price:$829.00

$40 REBATE or FREE DASH MOUNT! Edge Juice with Attitude CS '98.5-'02 Dodge 5.9L 24V

Mon, 06 Feb 2012 21:29:22 +0000

FEATURES • 6 On-the-Fly Adjustable Power Levels* • Full-color, high-resolution, 2.4 inch button-controlled screen (CS) • Up to an Additional 120 HP and 350 ft lb Torque* • Increase Fuel Economy* • Greatly Improves Drivability • Enhances Towing Performance • Excellent Throttle Response • Easy Instillation • Ships with a universal suction cup mount • Includes light sensitivity meter to dim screen as ambient light decreases • Internet Updateable (Attitude only) • Hot Unlock Codes available to unlock additional performance (additional fee and waiver required) Level 0: Stock Level 1: 40 Horsepower - 150 Foot Pounds of Torque Level 2: 60 Horsepower - 200 Foot Pounds of Torque Level 3: 80 Horsepower - 250 Foot Pounds of Torque Level 4: 100 Horsepower - 300 Foot Pounds of Torque Level 5: 120 Horsepower - 350 Foot Pounds of Torque Level 6: 120* Horsepower – 350* Foot Pounds of Torque Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form. GAUGES When used with the Attitude CS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time. • Backdown % • Voltage • EGT (exhaust gas temp) • Engine Coolant Temp • Engine Fuel Pressure (pressure of the fuel “lift pump”) • Fuel Temperature (measured in the VP44 injector pump) • Intake Air Temp • Engine Load % (only on later models) • Module Temperature (internal temperature of the module) • RPM • Speed MPH • Throttle % • Transmission Temp • Turbo Boost Pressure • Oil Pressure SAFETY FEATURES • Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip* • Turbo Timer* (allows turbo to cool before truck shuts off) • Cold Engine Protection (no extra fuel is added until the engine is warm) • User-Adjustable Audible Alert Settings IMPROVED DRIVEABILITY FEATURES • Low-Boost Fueling Adjustment • Shift Defuel Setting* PERFORMANCE TESTING, ALERTS & RECORDS Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters. EXPANDABLE (items sold separately) • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories MYSTYLE™ SOFTWARE (included) MyStyle™ software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.

Price:$829.00

$25 REBATE or FREE DASH MOUNT! Evolution CTS Diesel- Color Touch Screen

Mon, 06 Feb 2012 21:29:22 +0000

APPLICATIONS: '01-'10 Chevy Duramax2500/3500/4500/5500 6.6L '94-'03 Ford F-250 7.3L '03-'07 Ford F-250 6.0L '08-'10 Ford F-250 6.4L (Ford F-350 1994-2003 7.3L, 2003-2007 6.0L, 2008-2010 6.4L) (Ford F-450 2008-2010 6.4L) (Ford Excursion 2000-2003 7.3L, 2003-2005 6.0L) (GMC Sierra 2500 2001-2010 6.6L Duramax) (GMC Sierra 3500 2001-2010 6.6L Duramax) (GMC Sierra 4500 2001-2010 6.6L Duramax) (GMC Sierra 5500 2001-2010 6.6L Duramax) *Will not work on LB7 or LLY with a manual transmission.

FEATURES • Full-color, high-resolution, 4.3 inch touch screen • Multiple power levels for Mileage, Towing and Performance • One part number for diesel vehicles for ALL OEM applications (as they become available) • Video-in port that connects to Edge backup camera, DVD player or any other compatible camera • Compatible with optional EGT pyrometer for engine protection • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories • Includes light sensitivity meter to dim screen as ambient light decreases • Internet updateable (cable included) • Displays and clears Diagnostic Trouble Codes • Displays Alerts and Records such as RPM, MPH and EGT • 0-60 and Quarter-Mile performance test with drag-strip, Christmas-tree lighting (graphs speed and time on screen) • Displays up to 8 parameters at a time in digital display mode • Monitors and displays Diesel Particulate Filter (DPF) status on new emission diesel trucks • Ships with a universal suction cup mount from Arkon, the leader in device-mounting solutions. • Compatible with all Edge custom dash pods(sold separately).

Price:$730.12 Special Price:$649.00

$75 REBATE!!! Superchips VIVID Performance Tuner- Ford, GM, Dodge, & Jeep

Mon, 06 Feb 2012 21:29:22 +0000

- Industry leading tuning for trucks, Jeeps and performance cars delivering maximum horsepower, torque and world class drivability for your vehicle - Tune for high performance, heavy load towing, fuel economy or off-road uses - Syncs wirelessly with your vehicle using included Bluetooth dongle - Uses Android operating systems to provide a simple yet effective user interface to make tuning a snap - 50-state emissions legal - Uses on-board 3-axis accelerometer and graphics accelerator to measure pitch and roll - Establish entrance and departure points for turns - Make last minute car setup adjustments at the track - Monitor off-road driving performance - On-board graphics accelerator exploits Android OS 3D capabilities for games, animated interface and transition effects - Let kids and friends entertain themselves on long road trips - Many games utilize the 3-axis accelerometer for a more realistic game playing experience - Use the HDMI output to play the game on your TV and use the device as the steering wheel or controller - No need to buy another expensive in-cabin device. Just buy a GPS antenna easily found online and GPS app for Android OS Depending on the app, topographical maps are available for off-road uses - Preloaded with music, video and photo applications - 8GB of internal flash memory with SD card for further expansion - Share photos or video by syncing with Facebook, YouTube, Picasa or Flickr - HD camcorder records in 720p - HD video playback - Mini HDMI out for watching video on TV - 2 MP digital camera - Easily sync video and pictures to popular social media sites - Intercept PIDs on the bus and display them in real-time - Gauges provide vital information when towing, off-road or at the track - Includes several gauge sets - Monitor EGTs while towing to avoid diesel engine troubles1 - Maximize track performance with real-time feedback - No more missing important maintenance intervals - Easy to setup and use - Uses include reminders for oil changes, rotate tires and more - App automatically recognizes when a check engine light is on and provides a summary - No more unnecessary time consuming trips to the dealer

Price:$599.95

aFe Atlas Exhaust Race Pipe- '08-'10 Ford Diesel V8- 6.4L

Mon, 06 Feb 2012 21:29:22 +0000

- All systems use factory mounting locations providing stability and hassle-free installation - High quality OE style band clamps and flanges are used for a complete 360º sealing surface - ATLAS exhaust pipes are constructed of precision 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s

*NOTE: This is a "Race Only" product used soley for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.

Price:$206.95

aFe Power Stage 2 Air Intake System- '12 Jeep Wrangler JK V6 3.6L

Mon, 06 Feb 2012 21:29:22 +0000

- Outflows the factory intake system by 48% - Maximum performance gains of 12hp and 13lbs. x ft. of torque - Utilizes a highly engineered one-piece heat-shield that requires minimal assembly for ease of installation - Improves volumetric efficiency for maximum performance while lowering Intake Air Temps (I.A.T) - Black powdercoated - Hassle free installation using factory mounting points - Variety of filter options available - Made in the USA

Price:$290.95

aFe ATLAS Exhaust Race Pipe- '07.5-'10 GM Diesel Trucks V8-6.6L (td) LMM

Mon, 06 Feb 2012 21:29:22 +0000

- All systems use factory mounting locations providing stability and hassle-free installation - High quality OE style flanges are used for a complete 360º sealing surface - ATLAS exhaust race pipes are constructed of mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s

Price:$170.95

Smittybilt Body Cladding- '07-'12 Jeep Wrangler JK

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 1/8" cold-rolled steel - Engineered to fit and follow body contour to exacting specifications - Complete lower quarter panel protection when used with XRC Rock Sliders - Engineered to work with OE and aftermarket flares as well as the XRC body armor - 304 marine-grade stainless steel button head hardware - Two stage textured matte black finish powdercoat finish - 5-year limited warranty - Smittybilt Advantage Warranty - limited lifetime warranty

Price:$145.95

DP Leveling package- '05-'10 Ford F-250/350

Mon, 06 Feb 2012 21:29:22 +0000

Rancho RS7000 MT shocks (included in this package) feature...

- Brushed Stainless Appearance with a Clear Coat Finish specifically engineered to provide better handling, control and performance for high center of gravity light trucks and SUV's.
- These shocks provide enhanced stability by reducing body roll in evasive maneuvers and tight turns.
- Also feature a high-pressure gas charge that separates the unit internal oil and nitrogen to provide additional spring rate, helping to maximize damping response that dissipates heat for better control.
- Also include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.

Price:$249.00 Special Price:$204.98

H&S Black Maxx Race Tuner- Cummins/ Powerstroke/ Duramax

Mon, 06 Feb 2012 21:29:22 +0000

- Comes preloaded with DPF Present and DPF Removed tuning - Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust) - Precisely tune engine with HP increases of 0-250HP - Approximate size: 5″ x 3″ (2.75″ x 2.25″ color screen) - Enable / Disable factory “special features”. High idle, fogs w/highs, seat belt chimes, daytime running lights, etc. (6.7L Cummins). - Speedometer recalibration for use of non-stock size tires or gearing - Automatic safety backdown. Controlled by EGT, Boost, Trans. Temp, and Coolant Temp - Remove / Adjust top speed limiter - Allows removal of the entire EGR system including cooler with no trouble codes - Turn off EGR without removing ANY parts - Read / Clear Diagnostic Trouble Codes - Internet updateable w/included SD Memory Card and USB Cable - Digital gauges to monitor 20+ parameters - Custom tunes are FREE to download from H&S' website - Allows for use of aftermarket turbo kits with no trouble codes (6.7L Cummins) - Transmission tuning included on the 6.4L Powerstroke - Transmission Tuning Available for the 6.7L Cummins
APPLICATIONS: - '06-'07 5.9L Dodge Cummins - '07.5-'12 6.7L Dodge Cummins - '08-'10 6.4L Ford Powerstroke - '03-'07 6.0L Ford Powerstroke - '11 6.7L Ford Powerstroke* - '07.5-'09 6.6L GM Duramax - '11 6.6L GM Duramax LML* * '11 Duramax and Powerstroke may require unlock code (orderable at checkout) NOTE: This product is capable of disabling emissions equipment. If using DPF/EGR removed tuning, this high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! This product is NOT legal for sale or use in the state of California. Click for installation instructions

Price:$1,249.00 Special Price:$1,186.55

H&S Mini Maxx Race Tuner- Cummins/Powerstroke/Duramax

Mon, 06 Feb 2012 21:29:22 +0000

- Comes preloaded with DPF Present and DPF Removed capable tuning - Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust) - Precisely tune engine with HP increases of 0-250HP - Approximate size: 3.5″ x 2″ (2″ x 1.5″ color screen) - Speedometer recalibration for use of non-stock size tires or gearing - Enable / Disable factory “special features”. High idle, fogs w/highs, seat belt chimes, driving lights, etc. (6.7L Cummins) - Automatic safety backdown. Controlled by EGT, Boost, Trans. Temp, and Coolant Temp - Remove / Adjust top speed limiter - Allows removal of the entire EGR system including cooler with no trouble codes - Turn off EGR without removing ANY parts - Read / Clear Diagnostic Trouble Codes - Custom tunes are FREE to download from H&S' website - Internet updateable w/included SD Memory Card and USB Cable - Digital gauges to monitor 20+ parameters - Allows for use of aftermarket turbo kits with no trouble codes (6.7L Cummins) - Transmission tuning included on the 6.4L Powerstroke - Transmission tuning available for the 6.7L Cummins
APPLICATIONS: - '06-'07 5.9L Dodge Cummins - '7.5-'12 6.7L Dodge Cummins - '08-'10 6.4L Ford Powerstroke - '03-'07 6.0L Ford Powerstroke - '11 6.7L Ford Powerstroke* - '7.5-'09 6.6L GM Duramax LMM - '11 6.6L GM Duramax LML* * '11 Duramax and Powerstroke may require unlock code (orderable at checkout)
NOTE: This product is capable of disabling emissions equipment. If using DPF/EGR removed tuning, this high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! This product is NOT legal for sale or use in the state of California.
Click for installation instructions

Price:$999.00 Special Price:$901.95

H&S XRT Pro Diesel Downloader- Cummins/ Powerstroke/ Duramax

Mon, 06 Feb 2012 21:29:22 +0000

- Comes preloaded with DPF Present and DPF Removed capable tuning - Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust) - Precisely tune engine with HP increases of 0-250HP - Instantly change power levels on the 6.4 Ford, 6.0 Ford, and 6.6 LMM (other applications take up to 12 minutes) - Speedometer recalibration for use of non-stock size tires or gearing - Enable / Disable factory “special features”. High idle, fogs w/highs, seat belt chimes, driving lights, etc. (6.7L Cummins) - Remove / Adjust top speed limiter - Allows removal of the entire EGR system including cooler with no trouble codes (6.7L, 6.4L, 6.0L) - Turn off EGR without removing ANY parts - Read / Clear Diagnostic Trouble Codes - Custom tunesare FREE to download from H&S' website - Internet updateable w/included SD Memory Card and USB Cable - Allows for use of aftermarket turbo kits with no trouble codes (6.7L Cummins) - Transmission tuning included on the 6.4L Powerstroke - Transmission tuning available for the 6.7L Cummins APPLICATIONS: -' 06-'07 5.9L Dodge Cummins - '07-'11 6.7L Dodge Cummins - '07-'11 Dodge 68RFE Transmission ONLY - '08-'10 6.4L Ford Powerstroke - '03-'07 6.0L Ford Powerstroke - '11 6.7L Ford Powerstroke* - '07.5-'09 6.6L GM Duramax - '11-'12 LML Duramax * '11 Powerstroke may require software unlock code (orderable at checkout) NOTE: This product is capable of disabling emissions equipment. If using DPF/EGR removed tuning, this high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! This product is NOT legal for sale or use in the state of California. Click here for installation instructions

Price:$699.95 Special Price:$664.95

H&S Video-in-motion Software for BlackMaxx/ MiniMaxx- '09-'12 Dodge

Mon, 06 Feb 2012 21:29:22 +0000

- No physical hardware to install - Simple unlock code which can be done is less than 1 minute - Video-In-Motion software needs to be purchased and unlocked before it is available. To purchase this code you will need to know the last 6 digits of your VIN. To activate this feature, and enter the code, the tuner needs to be installed and working on the vehicle you wish to unlock. *NOTE: Due to the fact that codes are unique to each VIN, there will be no refunds or credits issued once an order has been placed for an unlock code. MAKE SURE THE VIN IS CORRECT AS THERE IS NO REFUND FOR INCORRECT VINs!

Price:$199.00

Sky Manufacturing Dana 60 6 Lug Conversion 15" Wheel Disc Brake Brackets

Mon, 06 Feb 2012 21:29:22 +0000

- Fits Dodge or Chevy Dana 60 6 spindle bolt knuckles - Brackets are laser cut and cnc machined 3/8ths PnO steel, designed for use with GM metric calipers ( common 79-85 Monte Carlo, Eldorado, etc) - Work with Sky Mfg 6 lug wheel hubs - Direct bolt on - Using this combination will allow the use of 15 inch wheels with a 3 3/4 backspace max - Brackets are shipped raw *NOTE: Will not work with 8 lug hubs and brake rotors.

Price:$79.00

Sky Manufacturing Front Shackle Hangar Kit- '88-'97 Ford F-250/F-350

Mon, 06 Feb 2012 21:29:22 +0000

- Bolt on application - Replaces the factory hanger by removing the rivets, prying the factory hanger from the frame, then align the holes in the new hanger with the frame, die grind frame holes if needed to make perfect. Bolt on new hanger with supplied hardware, or weld if so desired. - MIG welded - Laser cut - CNC formed plate steel - 1/4 and 3/16ths construction -

Price:$119.00

Sky Manufacturing Rear Shackle Kit- '88-'98 Chevy/GMC

Mon, 06 Feb 2012 21:29:22 +0000

- Fits pickups with 62 inch rear springs - New holes to mount the brackets need to be drilled to fit SUV - Two extra holes included underneath the frame and a reinforcement to keep from bending or fatiguing the frame that single shear( only mounted to the side of the frame ) kits have a tendency to do - Includes two brackets to position shackles in the down word position, 12 1/2 inch bolts, SAE flat washers, nylock nuts - Mig welded cnc laser cut and formed, 1/4 inch steel - Made in the USA! - Kit will add 4.5 inch lift

Price:$169.00

Sky Manufacturing Solid Axle Conversion Leaf Hangar Kit- Chevy/GMC & '78-'79 Ford

Mon, 06 Feb 2012 21:29:22 +0000

- Fits Chevy Dana 44 or Dana 60 axles w/ a 31.5 spring center pin measurement - Fits '78-'79 Ford Dana 44 or Dana 60 with a 31.5 spring center pin - On stock springs, kit will provide 2.5" to 3" of lift depending on motor combo and springs used - Minimum of 4 inch lift for oil pan, drive line, and exhaust clearance is highly recommended - Includes front solid axle leaf hanger, rear shackles and shackle hangers, bushings for shackles, and all hardware - This is a weld on kit, not bolt on - Some customers have drilled the hangers and made them bolt on but this is not recommended by Sky Manufacturing
Price:$399.00

Smittybilt G.E.A.R. Universal Truck Seat Cover

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 600 denier polyester with PVC liner - Molle/PALS design allows pouches to be transferred to any bag or backpack - 7 individual storage pouches - Adjustable to accommodate stock or aftermarket full-size truck seats

Price:$129.95

Smittybilt G.E.A.R. Rear Seat Covers- Jeep CJ, Wrangler & Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Designed with five different pouches - Made from 600 denier polyester with a PVC liner - Allows to add, remove or place modular pouches - Highly durable - Ensures easy installation

Price:$149.95

Smittybilt G.E.A.R. Front Seat Covers- Jeep CJ, Wrangler, & Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Designed with five different pouches - Made from 600 denier polyester with a PVC liner - Allows to add, remove or place modular pouches - Highly durable - Ensures easy installation APPLICATIONS: - '76-'86 Jeep CJ - '87-'11 Jeep Wrangler - "04-11 Jeep Wrangler Unlimited

Price:$99.95

Smittybilt Factory Replacement Seats w/ Recliner- Jeep CJ, Wrangler, Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Dual recliner mechanism to allow seat to function on either driver or passenger side - Comfortable spring suspension and custom molded foam - Bolts directly to factory mounts without drilling - Updated design now available! APPLICATIONS: - '76-'86 Jeep CJ - '87-'11 Jeep Wrangler - '04-'11 Jeep Wrangler Unlimited

Price:$219.99

Smittybilt Standard Bucket Seats

Mon, 06 Feb 2012 21:29:22 +0000

- These rugged, deeply contoured seats with firm comfortable spring suspension are available in the same colors as the factory seats - Installation is quick & easy - these bucket seats use the same mounting hardware and bolts from the original seats APPLICATIONS: - '76-'86 Jeep CJ - '87-'11 Jeep Wrangler - '07-'11 Jeep Wrangler Unlimited

Price:$135.95

Smittybilt Low Back Bucket Seats- '55-'76 Jeep CJ

Mon, 06 Feb 2012 21:29:22 +0000

- Designed for early-model CJ vehicles - Rugged, contoured seats firm comfortable spring suspension - Installation is quick & easy - these bucket seats use the same mounting hardware and bolts from the original seats

Price:$125.95

Smittybilt Fold & Tumble Rear Seats- Jeep CJ & Wrangler

Mon, 06 Feb 2012 21:29:22 +0000

- When cargo space is needed, just fold & tumble it forward - Store it out of the way behind your front seat - Installs easily with minimal drilling - Available in durable vinyl or full fabric front

Price:$209.95

Smittybilt XRC Seats- Jeep CJ, Wrangler, & Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- The XRC seat is built upon the renowned Kodiak Frame -- one of the strongest tubular frames in the industry - A high performance foam pack and Mil Spec fabric covering assures lasting quality and comfort - Available in three different color options: black on black, red on black, and charcoal on black. - Smart design facilitates the installation process. APPLICATIONS: - '76-'86 Jeep CJ - '87-'11 Jeep Wrangler - '04-'11 Jeep Wrangler Unlimited *NOTE: Direct replacement for 76-95 yrs, 96-02 will need bracket part 49900 and 49901, 03-06 yrs need bracket part 49902 and 49903, 07-10 yrs need front pair bracket part 49906 and rear brackets part 49905.

Price:$269.95

Smittybilt XRC Seat Covers- Jeep CJ, Wrangler, Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Seat frames are welded and powder coated to prevent rust or breakage - Extra thick foam sides cradle you in the seat for constant comfort - Assured high quality and dependability - Dense poured foam provides ergonomically efficient comfort and long-lasting density

Price:$129.95

Smittybilt Contour Sport Seats- Jeep CJ, Wrangler, Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Incorporates an adjustable headrest for added comfort - Extra-thick foam sides and bolsters cradle you in the seat - Welded powder coat painted seat frame will not rust or break - Extra heavy-duty suspension spring dampens the bumps - Infinite reclining system puts you in the seat exactly where you want to be - Dense poured foam pack is the very best you can buy - long life, extra comfort APPLICATIONS: - '76-'86 Jeep CJ - '87-'11 Jeep Wrangler - '07-'11 Jeep Wrangler Unlimited

Price:$269.95

Smittybilt SRC Side Armor

Mon, 06 Feb 2012 21:29:22 +0000

- One piece design - manufactured from 1.75" .120 wall tubing - Dual girder system provides the ultimate protection for the sides and under section of your Wrangler - Provides protection and a step at the same time - Wheel to wheel for maximum protection - Finished in the signature series Matte Black Textured Powder Coat

Price:$232.95

Smittybilt SRC Side Armor JK

Mon, 06 Feb 2012 21:29:22 +0000

- One piece design - manufactured from 1.75" .120 wall tubing - Dual girder system provides the ultimate protection for the sides and under section of your Wrangler - Provides protection and a step at the same time - Bolts up without drilling or modifications to the vehicle - Wheel to wheel for maximum protection - Finished in the signature series Matte Black Textured Powder Coat

Price:$299.95

Smittybilt SRC Classic Rock Rails With Step JK

Mon, 06 Feb 2012 21:29:22 +0000

- 3/16" Cold rolled Steel Plate Step - Dimple Die Holes For Rugged Look And Strength - Powder Coated 2" .120 Wall Race Tubing - Welded End Caps - Direct Bolt-On, No Drilling Required

Price:$276.95

Smittybilt SRC Rocker Guards

Mon, 06 Feb 2012 21:29:22 +0000

- One piece design - manufactured from 1.75" .120 wall tubing - Rocker guard features an upper tube for side protection - Wheel to wheel for maximum protection - Finished in the signature series Matte Black Textured Powder Coat

Price:$190.95

USED EDGE Juice With Attitude Modue- '07-'09 Dodge 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Adds upto 180 hp and 440 ft. lb. torque - 6 adjustable power levels - Touch-of-a-button control - Replaces gauges - Dramatically improves drivability, towing performance, & mileage - Easy installation

Price:$300.00

PIAA 530 LED Fog Lamp Kit

Mon, 06 Feb 2012 21:29:22 +0000

- Includes two (2) lamps, wiring harness, and switch - Several advantages over their halogen counterparts: very low power consumption, compact size, and durability - The 530 lamps aim the LEDs at the reflector - Better beam control and output - True high performance fog pattern in a lightweight, durable lamp - Requires a fraction of the power used by a comparable halogen lamp

Price:$279.95 Special Price:$191.95

aFe Power BladeRunner Turbocharger- '03-'07 Dodge L6-5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Produces an incredible 104hp and 206lbs. x ft. torque over the standard cummins turbocharger while lowering Exhaust Gas Temperatures (E.G.T) - Constructed of high quality A356 cast aluminum using a ported shroud compressor housing eliminating turbo bark and compressor surge - Utilizes factory mounting points and retains the factory air control valve for a safe and hassle-free installation - Equipped with a 58mm inducer and a 76mm exducer for reduced turbo lag and maximum performance and power - Comes standard with a heavy-duty billet aluminum wastegate actuator set at 40psi - New gaskets are supplied for a leak-free seal

Price:$1,464.95

aFe Power Twisted Steel Header (1.5" Single Cat)- '91-'99 Jeep Wrangler I6-4.0L

Mon, 06 Feb 2012 21:29:22 +0000

- Delivers an astounding 7hp and 9lbs. x ft. torque while outflowing the factory exhaust manifold - Constructed of 1.5” 14-gauge 409 SS tubing with a 1/2” thick head flange to ensure a leak free seal - True merged collector and optimized tube lengths are used for true pulse control technology improving flow and performance - Eliminates dead space that can cause turbulence and hindering flow that formed collectors are prone to produce - 100% hand TIG-welded construction ensures optimal strength and durability - Smooth curves and increased diameter of this header helps remove restriction and keeps exhaust gas flowing smoothly for improved performance and durability on and off the trails - All components supplied for hassle-free installation with no modifications necessary

Price:$458.95

aFe Power Transmission Pan- '94-'07 Dodge L6-5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Has additional capacity for 3 to 4 more quarts over stock at the factory line - Has a magnetic drain plug - 1/8" NPT port for your temperature sensor - Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling - Constructed out of durable die-cast A380 aluminum with reinforced ribs - Wrinkle black powder-coating with machined fins for maximum strength and styling - Available in black or machined fins - Fits the 727-DD transmission - Requires no modification to the factory dipstick NOTE: Gasket is not included. (P/N 46-70055) Installation Instructions

Price:$303.95

aFe Transmission Pan Gasket

Mon, 06 Feb 2012 21:29:22 +0000

- Used on aFe P/Ns 46-70051 & 46-70052 - Fits 727-DD Transmission - Dodge P/N 2464324

Price:$31.95

Bully Dog Heavy Duty WatchDog Multifunction Gauges

Mon, 06 Feb 2012 21:29:22 +0000

- Display instant fuel economy - Display trip economy info - Display driving efficiency - Visual and audible feedback - Export driving reports into Excel - Password Protection available - Record and Analyze the following parameters: Throttle %, Hard Stops, Engine load, Missed gears, Fuel Economy, Engine over rev, Engine idle time, & Vehicle over speed - Monitor four vehicle parameters at once - Prevent unsafe vehicle temps and levels - Set automated safety warnings - Visual and audible feedback warnings - Read trouble code number and description - Erase code from engine or drivetrain computer - Perform vehicle diagnostics on the road - Do it yourself, no mechanic necessary - Adjust top speed limit in the engine computer - Remain compliant in any state or province - Avoid costly change fees and fines - No tools necessary - Physical install takes less than 5 minutes - Heavy Duty RAM Mounts suction cup kit included - Bully Dog has teamed up with Gear Master to bring you the Gear Master Shiftometer software to the Heavy Duty WatchDog. The product ships with a Free Trial Version and the unlimited version is available through a simple upgrade.

Price:$899.95

GenRight ELITE Coilover Suspension Package- Jeep TJ, LJ, YJ

Mon, 06 Feb 2012 21:29:22 +0000

- Featured on Xtreme 4x4 TV because it was designed to give you all the parts you need (except the grinder, welder & time) to convert your Jeep from a nice trail rig to an Awesome rig on and off the trail (dual sport)! - Designed to provide a smooth non-binding travel through the entire stroke of the travel (articulation) - Optimal positioning of shocks and other suspension components to provide your vehicle the best articulation and dampening control for the best and most balanced ride - Replaces the entire Front and Rear suspension on your Jeep (TJ, LJ, YJ) with the best components - Features a long arm suspension that is NOT connected to the center transfer case skid plate either, like most others are- makes access to servicing the trans and t-case much easier! - Package includes: (1) Front Coilover "hoop" style shock mount kit (P/N FSM2004) (4) KING 2.0" Coilover shocks with dual rate springs and valved just for a Jeep (1) Front 3 link Suspension Kit with all adjustable ends (P/N SUP3101) (1) Rear Triangulated 4 link Suspension Kit with all adjustable ends (P/N SUP4101) (1) Outboard Rear Coilover shock mount kit (P/N RSM1001) (2) Additional limit straps, quad wrap (P/N SLSQ14) (2) Additional limit straps, quad wrap (P/N SLSQ08) -Detailed installation instructions - Clean way to convert your older leaf spring YJ over to coilovers and spank your buddies out on the trail! - All the kit pieces are made from heavy duty, trail proven parts and materials *NOTES: recommended for Jeeps with tires up to 36" (vehicles running tires 37" or bigger should consider one of our Stretch Suspension Packages) To install this kit it will require cutting, bending and welding; also require some minor cutting of the inner fender to accommodate your out board shocks and tires The kit is compatible with most body lifts, however we do not recommend anything over 2" This kit is designed to retain the factory steering box in the factory location

Price:$5,499.95

GenRight Legend ALIEN Complete Build Package- Jeep TJ, LJ

Mon, 06 Feb 2012 21:29:22 +0000

- Features 14" travel genuine KING coilover shocks and 1/4" thick wall lower control arms and brackets - Designed to provide smooth non-binding travel through the entire stroke of suspension travel (for crazy articulation) - Replaces the entire Front and Rear suspension on your Jeep (TJ or LJ) with the best components money can buy! - Features every possible upgrade you could get from us to lengthen your wheelbase and make the thing flex like a mad dog! - Kit Includes: (1) Front coilover "hoop" style shock mount kit (P/N FSM2004) (4) KING 2.0" Coilover shocks with dual rate springs and valved just for a Jeep (14" travel) (1) Front 3 link Suspension Kit with all adjustable ends (P/N F3LINKKIT) (1) Rear 4 link Suspension Kit with all adjustable ends (P/N R4LINKKIT) (1) Hollow Rear Sway Bar kit (P/N SWB1003) (1) Outboard Rear Coilover shock mounts (P/N RSM1001) (1) RK COMP (10 gal) Gas Tank and new lighter weight Skid (P/N GST2006) (1) Set of our Stretch Rocker Guards (aka: Rock Sliders) (P/N RCG5002) (1) Set of our Full Stretch COMP Cut Corner Guards (P/N CNR2004 or CNR6003) (2) Additional Quad Wrap limit straps & tabs (P/N SLSQ14) (2) Additional limit straps, quad wrap (P/N SLSQ08) - All the kit pieces are made from heavy duty, trail proven parts and materials *NOTES: Longer shocks can be ordered, but can only be used with FULL hydro steering. To install this kit it will require cutting, bending and welding; as well as some minor cutting of the inner fender to accommodate your out board shocks and tires. The kit is compatible with most body lifts, however we do not recommend anything over 2". This kit is not offered for the CJ or the YJ.

Price:$6,999.95

GenRight Legend COMP Complete Build Package- Jeep TJ, LJ, YJ

Mon, 06 Feb 2012 21:29:22 +0000

- This kit features 14" travel genuine KING coilover shocks and 1/4" thick wall lower control arms and brackets - Designed to provide smooth non-binding travel through the entire stroke of suspension travel (for crazy articulation) - This kit includes: (1) Front coilover "hoop" style shock mount kit (P/N FSM2004) (4) KING 2.0" Coilover shocks with dual rate springs and valved just for a Jeep (14" travel) (1) Front 3 link Suspension Kit with all adjustable ends (P/N F3LINKKIT) (1) Rear 4 link Suspension Kit with all adjustable ends (P/N R4LINKKIT) (1) Hollow Rear Sway Bar kit (P/N SWB1003) (1) Outboard Rear Coilover shock mounts (P/N RSM1001) (1) COMP (15 gal) Gas Tank and new lighter weight Skid (P/N GST2005) (1) Set of our Stretch Rocker Guards (aka: Rock Sliders) (P/N RCG5002) (1) Set of our Full Stretch COMP Cut Corner Guards (P/N CNR2004 & CNR6003 on the LJ) (2) Additional Quad Wrap limit straps & tabs (P/N SLSQ14) (2) Additional limit straps, quad wrap (P/N SLSQ08) - All the kit pieces are made from heavy duty, trail proven parts and materials. *NOTE: # To install this kit it will require cutting, bending and welding, as well as some minor cutting of the inner fender to accommodate your out board shocks and tires. The kit is compatible with most body lifts, however we do not recommend anything over 2" Retain the factory steering box in the factory location

Price:$6,999.95

GenRight Legend EXTREME Complete Build Package- Jeep TJ, LJ, YJ, CJ-7

Mon, 06 Feb 2012 21:29:22 +0000

- Good for up to a 5" rear stretch and a 3" front stretch to get your Jeep to the "Magic 100" wheelbase - Features 14" travel genuine KING coilover shocks and 1/4" thick wall lower control arms and brackets - Designed to provide smooth non-binding travel through the entire stroke of suspension travel (for crazy articulation) - Kit Includes: (1) Front coilover "hoop" style shock mount kit (P/N FSM2004) (4) KING 2.0" Coilover shocks with dual rate springs and valved just for a Jeep (14" travel) (1) Front 3 link Suspension Kit with all adjustable ends (F3LINKKIT) (1) Rear 4 link Suspension Kit with all adjustable ends (P/N R4LINKKIT) (1) Rear Sway Bar kit (P/N SWB1003) (1) Outboard Rear Coilover shock mounts (P/N RSM1001) (1) EXT (20 gal) Gas Tank and Skid (P/N GST2002) (1) Set of our Rocker Guards (aka: Rock Sliders) (P/N RCG5002) (1) Set of our Full Stretch Corner Guards (P/N CNR2003) (2) Additional Quad Wrap limit straps & tabs (P/N SLSQ14) (2) Additional limit straps, quad wrap (P/N SLSQ08) - All the kit pieces are made from heavy duty, trail proven parts and materials *NOTE: # To install this kit it will require cutting, bending and welding, as well as some minor cutting of the inner fender to accommodate your out board shocks and tires. The kit is compatible with most body lifts, however we do not recommend anything over 2" Retains your factory steering box in factory location

Price:$6,999.95

Smittybilt JK Grab Handle- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Extreme molded handle - Ballistic nylon webbing for added strength - Uses factory mounting points and factory hardware - Sold in pairs

Price:$24.99

Smittybilt Winch Grab Handle

Mon, 06 Feb 2012 21:29:22 +0000

- Extreme molded handle - Ballistic nylon webbing for extra strength - Versatile universal application

Price:$8.95

Smittybilt Fire Extinguisher Holders

Mon, 06 Feb 2012 21:29:22 +0000

- Designed to expand function and optimize the driving experience - Made from strong material - Highly durable - Requires no tools - Ensures easy installation

Price:$12.95

Smittybilt CB & Phone Holders

Mon, 06 Feb 2012 21:29:22 +0000

- Designed to expand function and optimize the driving experience - Made from strong material - Highly durable - Requires no tools - Ensures easy installation

Price:$7.95

Smittybilt Flashlight Holders

Mon, 06 Feb 2012 21:29:22 +0000

- Designed to expand function and optimize the driving experience - Made from strong material - Highly durable - Requires no tools - Ensures easy installation

Price:$8.95

Smittybilt Drink Holders

Mon, 06 Feb 2012 21:29:22 +0000

- Designed to expand function and optimize the driving experience - Made from strong material - Highly durable - Requires no tools - Ensures easy installation

Price:$8.95

Smittybilt First Aid Kits

Mon, 06 Feb 2012 21:29:22 +0000

- Tri-fold bag with multiple straps and buckles - First aid supplies not included - Universal roll cage fit - Black - Attaches to roll bars in three different locations - Has individual storage compartments

Price:$24.95

Smittybilt Adjustable Door Strap

Mon, 06 Feb 2012 21:29:22 +0000

- Sold in pairs - Designed to expand function and optimize the driving experience - Made from strong material - Highly durable - Requires no tools - Ensures easy installation

Price:$4.95

ATS Injector Nozzle, Stage 4 +200 hp - 2004.5-07 Dodge 5.9L Common Rail

Mon, 06 Feb 2012 21:29:22 +0000

Contrary to popular belief, all injectors are not created equal. ATS Cyclone Injectors for Dodge Cummins® offer a huge performance boost to any Dodge® diesel truck. Differently rated models are available depending on how much power increase is desired. Maximum fuel flow and atomization. Efficient burning. More power to the ground.

Price:$258.71 Special Price:$245.77

TJ Rubicon Compressor Mount Bracket for BellyUp

Mon, 06 Feb 2012 21:29:22 +0000

This bracket is designed to allow the factory Rubicon air locker compressor to mount to the TeraFlex BellyUp skidplate. Will fit all Rubicon model TJ Wranglers and Unlimiteds

Price:$73.99 Special Price:$67.99

Warn Winch Wireless Control System

Mon, 06 Feb 2012 21:29:22 +0000

The WARN Wireless Control System lets you operate your truck's winch remotely from up to 50' away. The system will work with any WARN winch with a 5-wire electrical system. The system is easy to install and a cinch to use. For easy installation, the Wireless Control System comes with a receiver with an internal antenna, and all of the necessary mounting hardware. The receiver is potted for extreme resistance to water and the elements. The weather-proof transmitter has two large buttons that make it easy to operate, even while wearing gloves, and its two-color LED provides operator feedback. When installed, the system is simple to operate. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the transmitter's battery is low. System automatically turns off to conserve battery life. With the WARN Wireless Control System, you can now operate your winch with no strings (or wires) attached.

Price:$157.46 Special Price:$121.00

Garrett Powermaxx Turbo- '03-'07 Ford 6.0L Powerstroke

Mon, 06 Feb 2012 21:29:22 +0000

- GT3788VA Turbo - Features the Garrett® patented Advanced Variable Nozzle Turbine (AVNTTM) design for increased compressor flow and boost response - Utilizes nine movable vanes which significantly increase turbine efficiency and improve engine performance from idle launch through peak torque - Patented integral electro-hydraulic actuation and proportional solenoid for infinitely variable control - Larger compressor wheel over stock increases maximum power range while keeping turbo speeds down for the same power output - Supports up to an additional 175 HP over stock with no sacrifice in drivability - Suitable as a performance upgrade or replacement for original equipment - Outline interchangeable for a perfect fit each and every time - Requires SCT tuner

Price:$1,289.00

Sky Mfg. Leveling Kit-'99-'04 Ford S.D. F-250/350 and Excursion 4x4

Mon, 06 Feb 2012 21:29:22 +0000

- Designed to give 2 inch's of front vehicle lift without changing spring rate. - 2 inch lift does not require the use of new pitman arms, brake lines or shocks. - Recommend adding new shocks for enhanced ride comfort and new stance. - Installs in less than 2 hours with basic hand tools (auto hoist greatly reduces install time) - Kit reuses factory hardware: No driveline or sway bar modifications are needed. - F-250/F-350 tire size is 35"/315 metric; Excursion tire size is 33"/285 metric - Kit is constructed from 3/8ths and 1/4 inch laser cut CNC formed steel, MIG welded, and gloss black powdercoated. - Fully USA made and assembled! Note: Factory crash bar is not reused with hanger kits. Installation: Front hangers will directly replace factory hangers, removal of bumper is recomended. Support vehicle correctly, remove springs from hangers and shackle. Remove factory hardware and front leaf spring hangers. Install new hangers reusing factory hardware. Rear shackles, simply remove the shackles, reusing factory hardware as possible. install new longer shackles, reinstall leaf springs to factory specs, check all hardware, retorque after 500 miles.

Price:$249.00

Muc-Off Split Second Deatailer Wax (1 qt.)

Mon, 06 Feb 2012 21:29:22 +0000

- Creates a stunning high gloss 'wet look' shine - No harmful acids, CFC's or solvents and is fully biodegradable - Extends the lifetime of the finish by preventing build-up of dirt and grime - Safely removes dust or light surface blemishes without the need of a complete clean - Leaving a 'water beading' finish - For the ultimate showroom finish use a Muc-Off premium quality Microfibre Cloth

Price:$14.95

Muc-Off Wunder Shine Liquid Wax (16 oz)

Mon, 06 Feb 2012 21:29:22 +0000

- Advanced Fluoro Polymer Polish & Protectant - Removes imperfections & fills minor scratches - 3 Wax Blend for a long lasting ultra deep shine - NO powdery residue - Clear Coat Safe - Contains Carnauba wax, the hardest naturally occurring wax known to man - Contains fluoro-polymer also known as FPT - Safe to use on carbon fibre - Ideal on Cars, Trucks, Motorcycles, Bikes, Boats and Motorhomes

Price:$19.95

Muc-Off Übershine Car Shampoo

Mon, 06 Feb 2012 21:29:22 +0000

- Formulated to remove heavy grime - pH balanced formula emulsifies dirt and grime - Contains engineered water softeners to leave a spot-free finish - Rich foam formula - Won't strip off wax protection - Gentle on all painted finishes as well as rubber, vinyl and plastics - Leaves a deep luxurious shine - California Air Regulatory Board Compliant - Contains no harmful acids, CFC's or solvents and is fully biodegradable - For the ultimate showroom finish use a Muc-Off premium quality Microfibre Cloth

Price:$11.95

Muc-Off Bug & Tar Remover

Mon, 06 Feb 2012 21:29:22 +0000

- Contains no harmful acids, CFC's or solvents and is fully biodegradable - Formulated to quickly and safely remove bugs, tar and tree sap - Safe to use on paintwork, plastics, windscreens, wing mirrors and alloy wheels - Also be used to remove tree sap

Price:$11.95

Muc-Off Glass Cleaner (16 oz.)

Mon, 06 Feb 2012 21:29:22 +0000

- contains no harmful acids, CFC's or solvents and is fully biodegradable - Kills 99.99% of germs - Contains NO harmful alcohol, solvents or ammonia - can also be used on your SatNav and in-car entertainment system - For the ultimate showroom finish use a Muc-Off premium quality Microfibre Cloth

Price:$7.95

Muc-Off Wheel Cleaner (1 qt.)

Mon, 06 Feb 2012 21:29:22 +0000

- Contains no harmful acids, CFC's or solvents and is fully biodegradable - Also available in Eco friendly 5 Ltr Re-fill - Also works on car seat covers! - Formulated using 'Nano Scale' materials

Price:$12.95

Muc-Off Pre-Wax Cleanser (8 oz.)

Mon, 06 Feb 2012 21:29:22 +0000

- Removal of old wax layers, surface contaminates and light swirl marks - Periodical use will give your car a truly deep shine - Long lasting carnauba protection - Prepares paintwork for wax applications - Formulated to remove heavy grime

Price:$13.95

Muc-Off Premium Microfibre Polishing Cloth

Mon, 06 Feb 2012 21:29:22 +0000

- Use Premium Microfibre Cloth to apply Muc-Off Miracle Shine or Split Second Detailer Wax for ultimate results - Simply wash and re-use hundreds of times! - Designed to clean delicate finishes

Price:$7.49

Muc-Off Performance Wheel Cleaner

Mon, 06 Feb 2012 21:29:22 +0000

- Contains no harmful acids, CFC's or solvents and is fully biodegradable - Available in Eco friendly 5 Liter Re-fill - Also works on car seat covers! - Formulated using 'Nano Scale' materials - Earth friendly - Derived from natural and renewable sources - Anti-bacterial cleaner - Removes brake dust, road grime and dirt deposits quickly and safely - Leaves a clear coat finish - Cuts through grime while protecting your wheel's finish

Price:$10.95

Muc-Off Tire and Bumper Shine (16.9 oz.)

Mon, 06 Feb 2012 21:29:22 +0000

- Contains no harmful acids, CFC's or solvents and is fully biodegradable - Formulated using 'Nano Scale' materials - Effective on rubber, metal, and plastics - Restores color and shine to your vehicle's metal, rubber and plastic parts - Apply Tire and Bumper Shine to your tires and rims to make future dust removal effortless

Price:$16.95

Muc-Off Dirty Work Wipes

Mon, 06 Feb 2012 21:29:22 +0000

- 'Ultimate Scrubbing Texture' for hard to shift grime - Each sheet contains a citric burst to banish grime and freshen hands without the need to rinse afterwards - Perfect for cleaning yourself up after spannering - Contains Lanolin to condition and moisturize your skin, helping to prevent dryness or cracking

Price:$3.95

Muc-Off Foam Fresh (200 mL)

Mon, 06 Feb 2012 21:29:22 +0000

- Gently agitates dirt and grime away leaving a fresh Citric Burst fragrance - "Imagine a cleaner that eradicates the dreaded stench that's typically found in helmets and motocross boots" -Motocross Action Magazine - Also awesome on pads, gloves, shoes, liners and body armor

Price:$9.95

Cleaning Kits aFe Restore Kit - Aerosol

Mon, 06 Feb 2012 21:29:22 +0000

- Includes aerosol bottle of aFe blue filter oil and a spray bottle of aFe filter cleaner Installation Instructions

Price:$11.95

S&B Cold Air Intake Kit- '92-'00 Chevy/ GMC 6.5L Diesel

Mon, 06 Feb 2012 21:29:22 +0000

Price:$299.95

S&B Cold Air Intake Kit - '11 Powerstroke 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 34.0% better than the stock intake when measuring just the resistance to airflow. - Flows 14.6% better than the stock intake while loading the filter with ISO specified dust. - 99.57% (Cotton Filter) Efficient @ 580 CFM (ISO Course Dust)

Price:$289.95

Smittybilt Tow Hook Kits- Jeep Wrangler, Wrangler Unlimited, & Cherokee

Mon, 06 Feb 2012 21:29:22 +0000

- 10,000lb rated tow capacity - Available in chrome and black - Includes Tow Hook, Clip, 2 Nuts, & Bolts - No Drill Installation - Fits on the front

Price:$8.95

Smittybilt Grab Handles

Mon, 06 Feb 2012 21:29:22 +0000

- Designed to mount over roll bar pan - Made from weather resistant outdoor grade fabric - Highly durable - Requires no tools - Ensures easy installation

Price:$4.95

Yukon Spin Free Locking Hub Conversion Kit for Dana 44- '99 Dodge 1/2 ton

Mon, 06 Feb 2012 21:29:22 +0000

- Reduced drag for better fuel economy - 4340 Chrome-Moly outer axles - Includes WARN premium locking hubs, giving you more driving selectability - Includes new rotors, spindles, high strength Yukon 4340 Chrome-Moly outer axles, WARN premium locking hubs, Timken bearings, high quality seals and all hardware for installation - Wheel hub diameter on this kit is larger than stock NOTE: If your vehicle is equipped with the factory aluminum wheels, the center will need to be machined to 3.450" I.D to fit. The factory steel wheels will NOT work with this kit.

Price:$1,180.95

Smittybilt License Plate Light Mount

Mon, 06 Feb 2012 21:29:22 +0000

- An easy solution when extra light is needed - Easy Install! Requires no drilling or modifications - Finished in black powder coat - Comes complete with all necessary hardware - Can be used for backup lights

Price:$19.95

Smittybilt Aluminum Hawse Fairlead Light Mount

Mon, 06 Feb 2012 21:29:22 +0000

- An easy solution when extra light is needed - Easy Install! Requires no drilling or modifications - Finished in black powder coat - Comes complete with all necessary hardware

Price:$19.95

aFe Power Transmission Pan- '07.5-'11 Dodge L6-6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- 3 to 4 quart additional capacity over the stock pan - Magnetic drain plug and additional 1/8" NPT port for your temperature sensor included - Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling - Constructed out of durable die-cast A380 aluminum with reinforced ribs - Wrinkle black powder-coated finish for maximum strength and styling - Fits the 68RFE transmission - Supplied with silicone for a leak-free seal - No modification to the dipstick is needed

Price:$289.95

Smittybilt Replacement Soft Tops- '86-'94 Samurai, Tracker & Sidekick

Mon, 06 Feb 2012 21:29:22 +0000

- Available in Denim Black and White - Fits over original factory OE hardware/ framework - Uses DOT approved first quality window materials - Marine grade durable vinyl coated soft top OEM style fabrics to resist fading and stretching - Seams are heat sealed to prevent leaking, wick stop threads seals the stitch holes - No other soft top manufacturer uses this high quality thread - Includes (2) front replacement upper door skins - Self correcting zippers - zippers run smoother and last longer - The Side windows and rear window will completely zip out when needed for full ventilation Installation Instructions- Samurai
Installation Instructions- Sidekick/ Tracker

Price:$199.95

Smittybilt Hard Tops- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from honey comb hand-laid fiberglass for extra strength and rigidity - Contoured DOT approved safety glass-31% Tint - Military Spec mildew free carpeted headliner - Thickest UV stable gel coat available-Black - Textured grain finish complimenting the looks of today's Wrangler - OE Style front latching mechanism - New and Improved aerodynamic shape - De-Tuned air vent - Rack ready mounting system - Available in One-Piece or Two Piece design - Available with or with out upper doors

Price:$2,699.95

Smittybilt ProTops- '97-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured out of Aircraft Grade perforated aluminum - Installs around the roll bar and won't interfere with your soft or hard top - No more flapping - Complete protection from the elements - No modifications or drilling required - Can be removed easily and quickly if needed - Finished in satin black powder coat - Completely UPSable

Price:$399.95

Smittybilt OE Style Tailgate Bars- '97-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Powder coated to match OE finish - Uses existing factory locations - No drilling or modifications required

Price:$39.95

S&B CNC Intake Elbow- '03-'07 Dodge 2500/ 3500

Mon, 06 Feb 2012 21:29:22 +0000

NOTE: This item will be released October 1, 2011; We are accepting pre-orders now. - 100% Machine Cut & TIG Welded - CARB Exempt pending (Exemption sticker mailed out upon issuance) APPLICATION: '03-'07 Dodge 2500/3500 L6-5.9L, Diesel

Price:$349.00

S&B Airflow Value Package- '03-'07 Dodge 2500/ 3500

Mon, 06 Feb 2012 21:29:22 +0000

NOTE: The intake elbow will be released October 1, 2011; We will ship the elbow as soon as it becomes available; the remaining parts ship immediately. - Intake elbow is 100% Machine Cut & TIG Welded - CARB Exempt pending (Exemption sticker mailed out upon issuance) - Package includes P/Ns 75-5047 and 76-1004

Price:$638.00

Edge CS and CTS Pillar Mount- '10-'11 Dodge

Mon, 06 Feb 2012 21:29:22 +0000

- Fits CS and CTS products (CTS needs the pod adaptor to fit with mount. P/N 98003) - Durable high quality .125” ABS plastic (will not warp or deform even in direct sunlight) - Vacuum-formed edges - Manufactured for a perfect fit and finish - Angled for easy viewing - Color matched to the vehicle’s interior - Easy installation

Price:$40.00

Edge CTS Dash Pod Adapter Kit

Mon, 06 Feb 2012 21:29:22 +0000

- Allows CTS programmer to fit in various Edge mounts

Price:$10.00

Smittybilt Hard Tops- '97-'06 Jeep Wrangler

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from honey comb hand-laid fiberglass for extra strength and rigidity - Contoured DOT approved safety glass - 31% Tint - Military Spec mildew free carpeted headliner - Thickest UV stable gel coat available - Black - Textured grain finish complimenting the looks of today's Wrangler - OE Style front latching mechanism - New and Improved aerodynamic shape - De-Tuned air vent - Rack ready mounting system - Available in One-Piece or Two Piece design - Available with or with out upper doors Installation Instructions

Price:$2,099.95

Smittybilt Replacement Soft Tops- '87-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Available in Denim Black, Gray, Diamond Black, and Denim Spice - Fits over original factory OE hardware / framework - Uses DOT approved first quality window materials - Marine grade durable vinyl coated soft top OEM style fabrics to resist fading and stretching - Seams are heat sealed to prevent leaking, wick stop threads seals the stitch holes - No other soft top manufacturer uses this high quality thread - Includes (2) front replacement upper door skins - Self correcting zippers - zippers run smoother and last longer - The Side windows and rear window will completely zip out when needed for full ventilation APPLICATIONS: - '87-'11 Jeep Wrangler - '07-'11 Jeep Wrangler Unlimited

Price:$99.95

Banks AutoMind Programmer- '01-'10 Chevy/ GMC Duramax

Mon, 06 Feb 2012 21:29:22 +0000

- Adjust or remove the engine rev limiter and/ or top speed limiter - Speedometer calibration based on tire size and/ or gear ratio - Adjust the cooling fan activation temperature - Adjust shift points and/ or shift firmness - Includes a fuel economy calibration - Read and clear trouble codes - Internet updateable

Price:$421.95

Banks AutoMind Programmer- '99-'10 Ford Powerstroke

Mon, 06 Feb 2012 21:29:22 +0000

Price:$421.95

Banks AutoMind Programmer- '03-'10 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

Price:$421.95

Bully Dog Stage 2 Rapid Flow Cold Air Intake- '09-'11 Chevy/ GMC

Mon, 06 Feb 2012 21:29:22 +0000

- 10+ hp 12+ lbs ft. - Lower intake temperatures - Increased air flow - Enclosed design blocks engine heat - Perfect fit in vehicle every time - Easy 20 minute install 1 year warranty - Easy filter access for maintenance - OEM style chrome dipped lid latches - Precision design on all MAF sensor mounts - Stage 2 design reaches from inlet to throttle body NOTE: Does not fit 2011 6.0Ls in HD models, 2500 SUVs, and hybrids Installation Instructions

Price:$339.99 Special Price:$271.95

Smittybilt M1 Front Bumpers- '06-'11 Dodge Ram 2500/ 3500

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 3/16 & 1/4 cold roll steel - Ultra Bright Driving & Fog Lights - Solid Mount D-Rings - Welds on the inside and out - Solid plate center section that wraps the frame horns and lower cross member - Built in winch plate to accommodate up to 16.5k winch - One-Piece welded design - Two Stage Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty - Textured Black finish

Price:$1,299.95

Smittybilt M1 Front Bumpers- '08-'11 Chevy Silverado 2500/ 3500 HD

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,299.95

Smittybilt M1 Front Bumpers- '08-'11 Ford F250/ F350 SD

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,299.95

Smittybilt M1 Front Bumpers- '07-'11 Toyota Tundra/ FJ Cruiser

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,299.95

Smittybilt OE Style Door Surrounds- '97-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured out of high impact injection molded plastic - Engineered to the exact OE specifications - Uses existing factory locations - No drilling or modifications required

Price:$110.95

Smittybilt Tubular Front Bumpers- '76-'86 Jeep CJ, '87-'06 Wrangler, '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- All Smittybilt Tubular Front Bumpers sport the signature look with pre-cut vertical uprights, giving your vehicle a distinctive appearance. - The one-piece design is robotically welded for extreme durability. - Stainless steel design is polished to a mirror finish, or triple chrome plated for the ultimate shine. - Optional license plate set for all Front Tubular Bumpers available (sold separately)

Price:$139.95

Smittybilt Tubular Front Bumpers- '07-'11 Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

Price:$209.95

Smittybilt Tubular Rear Bumpers- '96-'06 Jeep Wrangler, '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Each Bumper requires no drilling for installation - Each bumper ins manufactured out of 3" .070 wall tubing

Price:$139.95

Smittybilt Sure Steps- Jeep CJ, Cherokee, Wranglers

Mon, 06 Feb 2012 21:29:22 +0000

- Rugged eight-point frame mount provides strength and rigidity. - All installation hardware included. - Heavy duty one-piece welded design ensures stability. - Available in four finishes for complete customization of your vehicle. '76-'06 CJ/ Wrangler Installation Instructions
'84-'01 Cherokee 4 Dr Installation Instructions
'97-'06 Wrangler/ Wrangler Unlimited Installation Instructions
'07-'11 Wrangler Installation Instructions
'07-'11 Wrangler Unlimited Installation Instructions

Price:$199.95

Smittybilt SRC Front Bumper- '87-'06 Wrangler, '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Sport the signature look with pre-cut vertical uprights - Stainless steel design is polished to a mirror finish - One-piece design is robotically welded for extreme durability - Assured high quality and dependability - Tested under extreme conditions NOTE: Winch Plate Sold Separately- Use Part #2801 or 2802 Smittybilt Winch Plate Installation Instructions

Price:$259.95

Smittybilt Winch Plates

Mon, 06 Feb 2012 21:29:22 +0000

- Engineered to high standards - Assured high quality and dependability - Tested under extreme conditions P/N 2802: - Raised winch plate to accommodate larger bumpers to eliminate roller fairlead interference - Made for 1/4 inch steel, powder coated black for long lasting durability - Mounting hardware included - Supports up to a 10,000 winch with standard bolt pattern APPLICATIONS: '87-'06 Jeep Wrangler Installation Instructions- 2801

Price:$69.95

Smittybilt SRC Front Bumper- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Center section is manufactured from 3/16" Cold Rolled Steel Plate to protect horns and lower cross member - The wings and over rider is manufactured form 1.75" 120 tubing - Two Point D-Rings are one of the strongest mounts in the industry - One Piece Welded Design - Front bumper features two light tabs to hold up to a pair of 9" light - Integrated winch mount holds up to a 10,000 lb rated line pull winch - Two stage matte black powder coat finish - 5 Year Limited Warranty Installation Instructions

Price:$499.95

Smittybilt SRC Stinger Bumper- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 2 inch DOM 120 steel tubing and 3/16 inch cold rolled steel - D-ring mounts welded inside and out - Can be used with various winch plates - Maximum clearance for approach and departure angles

Price:$399.95

Smittybilt SRC Rear Bumpers- '87-'06 Jeep Wrangler/ '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Class III Hitch Rated - Sport the signature look with pre-cut vertical uprights - Stainless steel design is polished to a mirror finish - One-piece design is robotically welded for extreme durability - Assured high quality and dependability - Tested under extreme conditions

Price:$259.95

Smittybilt SRC Rear Bumpers- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- 3/16" Solid plate center section designed to contour around an oversized tire to give you the maximum tire clearance when opening and closing your tailgate - Each rear bumper features a 2" receiver hitch that is incorporated into the bumper and bolts directly up to your OE Points plus the two D-Ring mounts! Installation Instructions- 76612
Installation Instructions- 76622

Price:$499.95

Smittybilt SRC Classic Front Bumper- '87-'06 Jeep Wrangler / '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Center section is manufactured from 3/16" Cold Rolled Steel Plate to protect the frame horns and lower cross member - Optional Two Point D-Rings are one of the strongest mounts in the industry - One Piece Welded Design - Two stage matte black powder coat finish - 5 Year Limited Warranty - Sport the signature look with pre-cut vertical uprights - Stainless steel design is polished to a mirror finish - One-piece design is robotically welded for extreme durability - Assured high quality and dependability - Tested under extreme conditions

Price:$129.99

Smittybilt SRC Classic Front Bumper w/out Winch Plates- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Center section is manufactured from 3/16" Cold Rolled Steel Plate to protect the frame horns and lower cross member - Two Point D-Rings are one of the strongest mounts in the industry - One Piece Welded Design - Front bumper features two light tabs to hold up to a pair of 9" light - Integrated winch mount holds up to a 10,000 lb rated line pull winch - Two stage matte black powder coat finish - 5 Year Limited Warranty

Price:$299.95

Smittybilt SRC Classic Front Bumper w/ Winch Plates- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Bumper manufactured from 3/16 inch cold rolled steel plate - Solid D-ring mounts welded inside and out - Built in winch plate

Price:$449.95

Smittybilt SRC Classic Rear Bumpers- '87-'06 Jeep Wrangler, '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Zinc Undercoated Dual Stage Textured Powdercoat for long life. - Heavy Duty 1/4" steel plate design. - Heavy duty latch mechanism keeps your tire secure. - Custom grease fitting keeps hinge clean and smooth after years of use. - 3 point tire mounting system supports oversized tires. - Available with or with out "D" Rings! - Class III tow rated

Price:$149.95

Smittybilt X2O 8 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts a 8,000 lb. line rating and 180:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 3/8" x 98.5' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (63.5 mm) x 8.82" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Total shipping weight: 88 lbs - Includes Wired Remote Control, Roller Fairlead, and Hook - Fairlead Does Not Mount To Winch** - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$399.99

Smittybilt X2O 8 Comp-Series Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts a 8,000 lb. line rating and 180:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 98.5' of 5/16" Synthetic DSK-75 8,000lb rope, 1/7th weight of steel cable / No Kinks, Curls or wire splinters / Minimal stretch Non-Rotational / UV and Abrasive Resistant / Specifically coated to resist slippage on winch drum / Comes with protective sleeve to prevent overheating and replaceable hook - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (63.5 mm) x 8.82" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Total shipping weight: 88 lbs - Aluminum Fairlead Included - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$549.99

Smittybilt X2O 10 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 10,000 lb. line rating and 218:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 3/8" x 98.5' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (64 mm) x 8.8" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21.15" x 6.3" x 8.6" (537 mm x 160 mm x 218 mm) - Total shipping weight: 94 lbs (42.5 kgs) - Includes Wired Remote Control, Roller Fairlead, and Hook - Roller Fairlead Does Not Mount To Winch** - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$499.99

Smittybilt X2O 10 Comp-Series Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 10,000 lb. line rating and 218:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 94' of Synthetic DSK-75 8,000lb rope, 1/7th weight of steel cable / No Kinks, Curls or wire splinters / Minimal stretch Non-Rotational / UV and Abrasive Resistant / Specifically coated to resist slippage on winch drum / Comes with protective sleeve to prevent overheating and replaceable hook - Intuitive design ensures a simple, hassle-free installation of the Smittybilt X2O 10 Winch - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (64 mm) x 8.8" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21.15" x 6.3" x 8.6" (537 mm x 160 mm x 218 mm) - Total shipping weight: 94 lbs (42.5 kgs) - Aluminum Fairlead Included - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$649.99

Smittybilt X2O 12 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 12,000 lb. line rating and 265:1 gear ratio - 6.6 hp, 12-volt, Series Wound Motor - 3/8" x 98.5' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.52" (64 mm) x 8.82" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Includes Wired Remote Control, Roller Fairlead, and Hook - Roller Fairlead Does Not Mount To Winch** - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$599.99

Smittybilt X2O 15 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 15,000 lb. line rating and 420:1 gear ratio - 6.6 hp, 12-volt, Series Wound Motor - 1/2" x 98.425' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 3.62" (96 mm) x 8.82" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Total shipping weight: 132 lbs - Includes Wired Remote Control, Roller Fairlead, and Hook - Roller Fairlead Does Not Mount To Winch - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$699.99

aFe Power Pro-Guard D2 Fluid Filter- '96-'06 BMW Gas Cars L6

Mon, 06 Feb 2012 21:29:22 +0000

- Cartridge style filter - Built-in seal for a hassle free installation

Price:$9.95

aFe takeda Attack Stage 2 Cold Air Intake System- '11 Ford Fiesta L4-1.6L

Mon, 06 Feb 2012 21:29:22 +0000

- Produces 6hp and 7lbs. x ft. of torque - Outflows the factory intake by 68% - Constructed out of lightweight clear-coat anodized tubing for maximum air flow and a great style - Uses large 360 degree high flow Pro DRY S air filters for maximum flow, filtration and convenience - Pro DRY S air filter requires no oils and cleans with simple soap and water - Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation

Price:$249.95

aFe MACH Force XP Exhaust System- '07.5-'10 Chevy/GMC Trucks V8-6.6L (td) LMM

Mon, 06 Feb 2012 21:29:22 +0000

- Outflows the factory exhaust by 300cfm - Constructed of durable 5" mandrel bent 409 stainless steel - Uses bayonet style hangers and band clamps for a hassle free installation - System comes complete with all tubing, bayonet hangers and band clamps - Kits with a tip and muffler include a free flowing muffler, all tubing, bayonet hangers, band clamps and is finished off with a high luster 6" polished 304 stainless steel, rolled, slash cut tip NOTE: This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$679.95

aFe Power MACH Force XP Exhaust System- '11 Volkswagen Golf TDI 4 Dr L4-2.0L

Mon, 06 Feb 2012 21:29:22 +0000

- Produces 5hp and 6lbs. x ft. torque - Constructed out of mandrel bent, 2.5" 409 stainless steel and includes welded-on hangers and OE style band clamps for a simple and leak-free bolt-on installation - 2-piece design that requires no cutting to install - 5lbs. lighter than the factory exhaust system - Dual 3" double walled polished stainless steel tip provides an aggressive yet elegant look - Installation Instructions

Price:$329.95

Smittybilt Modular Center Section with Winch Plate- '07-'11 Jeep JK

Mon, 06 Feb 2012 21:29:22 +0000

- Part of XRC Multi Optional Design (M.O.D.) System for '07-'11 Jeep JK, Wrangler or Wrangler Unlimited - Manufactured from 3/16 cold rolled steel - Solid Mount D-Rings - Weld on the inside and out! - Multi piece options allow you to build your bumper in any configuration for any situation - Built in winch plate to accommodate up to a 15k winch - Towable D-Ring mounts - Marine Grade Stainless Steel Hardware - Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty - System parts available separately: Mid-Width End Plates, Stinger, Full-Width End PLates, and Bull Bar

Price:$399.95

Smittybilt XRC M.O.D. Option - Mid Width End Plates- '07-'11 Jeep JK

Mon, 06 Feb 2012 21:29:22 +0000

- Part of XRC Multi Optional Design (M.O.D.) System for '07-'11 Jeep JK, Wrangler or Wrangler Unlimited - Manufactured from 3/16 cold rolled steel - Solid Mount D-Rings - Weld on the inside and out! - Multi piece options allow you to build your bumper in any configuration for any situation - Built in winch plate to accommodate up to a 15k winch - Towable D-Ring mounts - Marine Grade Stainless Steel Hardware - Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty - System parts available separately: Center Section, Stinger, Full-Width End Plates, and Bull Bar

Price:$99.95

Smittybilt XRC M.O.D. Option - Stinger- '07-'11 Jeep JK

Mon, 06 Feb 2012 21:29:22 +0000

- Part of XRC Multi Optional Design (M.O.D.) System for '07-'11 Jeep JK, Wrangler or Wrangler Unlimited - Manufactured from 3/16 cold rolled steel - Solid Mount D-Rings - Weld on the inside and out! - Multi piece options allow you to build your bumper in any configuration for any situation - Built in winch plate to accommodate up to a 15k winch - Towable D-Ring mounts - Marine Grade Stainless Steel Hardware - Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty - System parts available separately: Center Section, Mid-Width End Plates, Full-Width End Plates, and Bull Bar

Price:$149.95

Smittybilt XRC M.O.D. Option- Full Width End Plates- '07-'11 Jeep JK

Mon, 06 Feb 2012 21:29:22 +0000

- Part of XRC Multi Optional Design (M.O.D.) System for '07-'11 Jeep JK, Wrangler or Wrangler Unlimited - Manufactured from 3/16 cold rolled steel - Solid Mount D-Rings - Weld on the inside and out! - Multi piece options allow you to build your bumper in any configuration for any situation - Built in winch plate to accommodate up to a 15k winch - Towable D-Ring mounts - Marine Grade Stainless Steel Hardware - Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty - System parts available separately: Center Section, Mid-Width End Plates, Stinger, and Bull Bar

Price:$149.95

Smittybilt XRC M.O.D. Option- Bull Bar- '07-'11 Jeep JK

Mon, 06 Feb 2012 21:29:22 +0000

- Part of XRC Multi Optional Design (M.O.D.) System for '07-'11 Jeep JK, Wrangler or Wrangler Unlimited - Manufactured from 3/16 cold rolled steel - Solid Mount D-Rings - Weld on the inside and out! - Multi piece options allow you to build your bumper in any configuration for any situation - Built in winch plate to accommodate up to a 15k winch - Towable D-Ring mounts - Marine Grade Stainless Steel Hardware - Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty - System parts available separately: Center Section, Mid-Width End Plates, Stinger, and Full-Width End Plates

Price:$99.95

Smittybilt XRC Rear Bumper- '87-'06 Wrangler, '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Fully Adjustable Tire Mount up to a 37" tire - Heavy Duty Billet Latch Mechanism - Built in Safety Catch for those uneven parking situations - Solid D-Ring mounts welded inside and out. - Class III receiver hitch Installation Instructions

Price:$429.95

Smittybilt- XRC Rear Swing Away Tire Carrier- '87-'06 Wrangler, '04-'06 Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

Price:$249.95

Smittybilt XRC Rear Bumper with Hitch- '07-'11 Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 3/16" cold roll steel - 1.75" 120 wall over rider and kickers - Raised corners for better entry and exit under the most extreme conditions - Solid Mount D-Rings - Welds on the inside and out! - Solid plate center section that wraps the frame horns and lower cross member - One-Piece welded design - Two Stage Matte Black Finish Powder Coat Finish - 5 year Limited Warranty Installation Instructions

Price:$445.95

Smittybilt- XRC Rear Bumper with Hitch & Tire Carrier- '07-'11 Wrangler/ Wrangler Unlimited

Mon, 06 Feb 2012 21:29:22 +0000

Price:$899.95

Smittybilt XRC 8 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 8,000 lb. line rating and 172.8:1 gear ratio - 5/16" x 92' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (63 mm) x 9" (228 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21" x 6.22" x 7.283" (558.8 mm x 158 mm x 185 mm) - Total shipping weight: 94 lbs (42.5kgs) - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$299.99

Smittybilt XRC 8 Comp-Series Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 8,000 lb. line rating and 172.8:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 94' of 21/64" Synthetic DSK-75 8,000lb rope, 1/7th weight of steel cable / No Kinks, Curls or wire splinters / Minimal stretch Non-Rotational / UV and Abrasive Resistant / Specifically coated to resist slippage on winch drum / Comes with protective sleeve to prevent overheating and replaceable hook - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (63 mm) x 9" (228 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21" x 6.22" x 7.283" (558.8 mm x 158 mm x 185 mm) - Total shipping weight: 64 lbs - Aluminum Fairlead Included - All Smittybilt Winches meet SAE-J706 standard rating for winches

Price:$449.99

Smittybilt Winch Covers

Mon, 06 Feb 2012 21:29:22 +0000

- Available with Smittybilt or Smittybilt XRC logo - Fits XRC8, XRC10, & XRC12 Winches - Made of Black canvas material

Price:$21.95

Smittybilt XRC 10 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 10,000 lb. line rating and 218:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 23/64" x 94' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (64 mm) x 8.8" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21.15" x 6.3" x 8.6" (537 mm x 160 mm x 218 mm) - Total shipping weight: 94 lbs (42.5 kgs) - Includes Wired Remote Control, Roller Fairlead, and Hook - All Smittybilt Winches meet SAE-J706 standard ratings for winches NOTE: Roller Fairlead Does Not Mount To Winch

Price:$399.95

Smittybilt XRC 10 Comp-Series Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 10,000 lb. line rating and 218:1 gear ratio - 5.5 hp, 12-volt, Series Wound Motor - 94' of 21/64" Synthetic DSK-75 10,000lb rope, 1/7th weight of steel cable / No Kinks, Curls or wire splinters / Minimal stretch Non-Rotational / UV and Abrasive Resistant / Specifically coated to resist slippage on winch drum / Comes with protective sleeve to prevent overheating and replaceable hook - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.5" (63 mm) x 9" (228 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21.15" x 6.3" x 8.6" (537 mm x 160 mm x 218 mm) - Total shipping weight: 67 lbs - Aluminum Fairlead Included - All Smittybilt Winches meet SAE-J706 standard ratings for winches

Price:$549.99

Smittybilt XRC 12 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 12,000 lb. line rating and 265:1 gear ratio - 6.6 hp, 12-volt, Series Wound Motor - 94′ galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 2.52" (64 mm) x 8.82" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Overall Dimension (LxWxH): 21.15" x 6.3" x 8.6" (537 mm x 160 mm x 218 mm) - Total shipping weight: 94 lbs (42.5 kgs) - Includes Wired Remote Control, Roller Fairlead, and Hook NOTE: Roller Fairlead Does Not Mount To Winch

Price:$499.95

Smittybilt XRC 15 Winch

Mon, 06 Feb 2012 21:29:22 +0000

- Revolutionary planetary gear system boasts an 15,000 lb. line rating and 397:1 gear ratio - 6.6 hp, 12-volt, Series Wound Motor - 1/2" x 98.425' galvanized aircraft cable with replaceable hook included - Intuitive design ensures a simple, hassle-free installation - A heavy duty winching system with great features at an incredible overall value - Drum size: Diameter/Length: 3.62" (96 mm) x 8.82" (224 mm) - Mounting bolt pattern: 10" x 4.5" (4 bolts, 3/8") (254 mm x 114.3 mm) - Total shipping weight: 132 lbs - Includes Wired Remote Control, Roller Fairlead, and Hook - All Smittybilt Winches meet SAE-J706 standard ratings for winches NOTE: Roller Fairlead Does Not Mount To Winch

Price:$599.99

Smittybilt XRC Front Bumper with Winch Plate- '87-'06 Jeep Wrangler

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 3/16" cold roll steel - 1.75" 120 wall over rider and kickers - Raised corners for better entry and exit under the most extreme conditions - Solid plate center section that wraps the frame horns and lower cross member - Built in winch plate to accommodate up to 10k winch - One-Piece welded design - Two Stage Matte Black Finish Powder Coat Finish - 5 year Limited Warranty

Price:$398.95

Smittybilt XRC Front Bumper with Winch Plate- '07-'11 Jeep Wrangler

Mon, 06 Feb 2012 21:29:22 +0000

* Manufactured from 3/16 cold roll steel * 1.75" 120 wall over rider and kickers * Raised corners for better entry and exit under the most extreme conditions * Solid Mount D-Rings - Welds on the inside and out! * Solid plate center section that wraps the frame horns and lower cross member * Built in winch plate to accommodate up to 10k winch * One-Piece welded design * Two Stage Matte Black Finish Powder Coat Finish - 5 year Limited Warranty APPLICATIONS: - '07-'11Jeep Wrangler - '07-'11 Jeep Wrangler Unlimited

Price:$569.95

Smittybilt XRC Front Bumper with Winch Plate- '84-'01 Cherokee

Mon, 06 Feb 2012 21:29:22 +0000

- Manufactured from 3/16 cold rolled steel - Optional 1.75" .120 wall over rider with rear support kickers - Raised corners for better entry and exit under the most extreme conditions - Solid Mount D-Rings - Welds on the inside and out! - Built in winch plate to accommodate up to a 15k winch - One-Piece welded design - Two Stage Textured Matte Black Finish Powder Coat Finish - 5 year Limited Warranty - Smittybilt Advantage Warranty - Limited Lifetime Warranty

Price:$399.95

Dynomite Diesel 100hp Stage 2 Injectors- '94-'03 Ford Powerstroke 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- Will give you 100 horsepower at the wheels - Can be used with a stock turbo- Upgraded turbo recommended - 1-2 mph average mileage increase (maybe more!) - These injectors are brand new Alliant Power injectors that we modify and then provide to you with a 1 year unlimited mileage warranty - A core charge will be added if you want the injectors sent out to you before you have sent your old injectors back. Otherwise, your new injectors will be sent out as soon as your old ones are received. NOTE: An intercooler is mandatory with this set if you tow and highly recommended if you do not. They will be hot until you get the intercooler! No high pressure oil pump will be required.

Price:$3,100.00

Dynomite Diesel 200+hp Stage 4 Injector set- '94-'03 Ford Powerstroke 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- Gives about 200 hp over stock - Large aftermarket turbo, an intercooler (94-97), an upgraded high pressure oil pump and custom programming are required - Makes over 575hp on fuel alone and over 750 on nitrous - Mileage possibly not any better than stock- Programming will also make the mileage vary some - These injectors are brand new Alliant Power injectors that Dynomite Diesel modifies and then provides you with a 1 year unlimited mileage warranty NOTE: A $1200 core charge will be added if you want the injectors sent out to you before you have sent your old injectors back. Otherwise, your new injectors will be sent out as soon as your old ones are received.

Price:$3,500.00

S&B Cold Air Intake Kit- '03-'07 Dodge Cummins 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Airflow Rating: Flows 50.6% Better than the Stock Intake - Efficiency Rating: 99.81% Efficient @ 653 CFM (ISO Course Dust) NOTE: Intake will not work with a remote start system due to an interference with the safety switch and the S&B air box.

Price:$289.00

S&B Cold Air Intake Kit- '07-'08 Chevy Escalade 6.2L

Mon, 06 Feb 2012 21:29:22 +0000

- Airflow Rating: Flows 55.8% Better than the Stock Intake - Efficiency Rating: 99.40% Efficient @ 381 CFM (ISO Course Dust) APPLICATIONS: '07-'08 Chevy/ GMC Escalade, Avalanche, Tahoe, Yukon, Yukon XL, Yukon Denali, Yukon Denali XL, Suburban 1500

Price:$269.00

S&B Cold Air Intake Kit- '02-'08 Chevy/ GMC Gas

Mon, 06 Feb 2012 21:29:22 +0000

- Airflow Rating: Flows 47.3% Better than the Stock Intake - Efficiency Rating: 99.40% Efficient @ 381 CFM (ISO Course Dust) APPLICATIONS: '02-'08 - Sierra/ Silverado 2500, 3500 HD - Escalade - Avalanche - Suburban 1500, 2500 - Yukon - Yukon XL 2500, 3500 - Yukon Denali - Yukon Denali XL - Tahoe

Price:$269.00

Chilkat Designs 5VZ-FE Conversion Mounts- 3.4 Tacoma V6

Mon, 06 Feb 2012 21:29:22 +0000

- Uses OEM rubber mounts - Optional weld in gussets included - IFS conversions use 3.0 oil pan - TIG Welded - Kit includes 2 Relocation Plates, 2 Weld on Gussets, and Grade 8 bolts, nylocks, and washers

Price:$110.00

Chilkat Designs DIY RZ Downtube- '79-'95 4WD Toyota truck

Mon, 06 Feb 2012 21:29:22 +0000

- Precisely bent downtube clears the frame rail and stays tight to your manual transmission leaving ample room for your front driveline - Will save you hours of fabrication in this hard to reach area

Price:$109.00

Chilkat Designs Rear Sump Oil Pan Kit- Toyota Tacoma 2.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Comes in handy when doing a 2.7 or 2.4 Tacoma motor conversion into a straight axle Toyota or 2wd Toyota - Kit includes oil pan, oil pickup tube and gasket, dipstick with tube, sensor plug, and hardware

Price:$270.00

Chilkat Designs Universal Shock Hoops

Mon, 06 Feb 2012 21:29:22 +0000

- Available in HREW and DOM

Price:$59.00

aFe Power SCORCHER Tuner- '99-'11 GM Gas Cars/ Trucks

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 11hp and 15lbs. x ft. torque - Contains multiple tunes per application that can be changed to match the driving condition - Easy to follow prompts make this product one of the easiest and fun ways to increase power and improve driveability - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor APPLICATIONS: '99-'11 Chevy/ GMC Gas Cars/ Trucks Camaro/ Silverado/ Sierra V6/V8 Installation Instructions

Price:$536.25 Special Price:$429.95

aFe Power SCORCHER Tuner- '97-'10 Jeep Wrangler

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 24hp and 24lbs. x ft. torque - This small hand-held unit contains multiple tunes per application that can be changed to match the driving condition - Easy to follow prompts make this product one of the easiest and fun ways to increase power and improve driveability - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor APPLICATIONS: - '97-'10 Jeep Gas Trucks Wrangler I6-4.0L/V6-3.8L Installation Instructions

Price:$536.25 Special Price:$429.00

aFe Magnum FORCE Stage 2 Cold Air Intake System- '08-'10 Ford Diesel Trucks V8-6.4L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Produces 13 hp and 36 lbs. x ft. torque - Highly engineered heatshielded airbox with a one-piece intake tube - Pro DRY S filter is washable/reusable, and has a 360 degree inverted top radial flow air filter that provides maximum filtration and high flow - Heat-insulating, molded plastic intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T) - Utilizes factory mounting points for a hassle-free installation

Price:$310.00 Special Price:$248.00

aFe Magnum FORCE Stage 2 Air Intake System- '10-'11 Dodge Diesel Trucks L6-6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Produces 14 hp and 32 lbs. x ft. torque - Outflows factory intakes by 59% - Highly engineered heatshielded airbox with a one-piece intake tube all the way to the turbo - Washable/reusable Pro Guard 7 is a 360 degree radial flow air filter that provides maximum filtration (99.7% efficient) and high flow - Heat-insulating, molded plastic intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T) - Utilizes factory mounting points for a hassle free installation

Price:$443.75 Special Price:$355.95

BD Power Hose & Clamp Kits - '94-'07 Dodge 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

Replacement / Single HD Clamps: - 1405209 2.75-3.00" - 1405211 3.00-3.38" - 1407030 3.28-3.63" - 1405212 3.56-3.91" - 1405213 3.89-4.24"

Price:$262.50 Special Price:$223.25

Superchips Mileage XS Fuel Economy Tuner- '99-'10 Ford Powerstroke

Mon, 06 Feb 2012 21:29:22 +0000

- Up to 20% fuel economy gains - Read and clear trouble codes - Recalibrate the speedometer for tire size or gear ratio changes - Free updates available using the internet update software - Upgrade program available allowing you to trade up from your fuel economy tuner to a more aggressive performance tuner such as VIVID, Flashpaq or Cortex

Price:$299.95

Superchips Mileage XS Fuel Economy Tuner- '01-'10 Chevy/ GMC Duramax

Mon, 06 Feb 2012 21:29:22 +0000

Price:$299.95

Superchips Mileage XS Fuel Economy Tuner- '03-07 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

Price:$299.95

aFe Power SCORCHER Tuner- '98-'09 Dodge Ram (diesel)

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 60hp and 181lbs. x ft. torque - Multiple tunes per application that can be changed to match the driving condition (performance, mileage, towing, etc.) - Easy to follow prompts - One of the easiest and funnest ways to increase power and improve driveability - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor APPLICATIONS: '98-'09 Dodge Diesel Trucks RAM 2500/3500 L6-5.9/6.7L (td) Installation Instructions

Price:$536.25 Special Price:$429.00

aFe Power SCORCHER Tuner- '03-'11 Dodge Gas

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 20hp and 25lbs. x ft. torque - Multiple tunes per application that can be changed to match the driving condition (performance, mileage, towing, etc.) - Easy to follow prompts - One of the easiest and funnest ways to increase power and improve driveability - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor APPLICATIONS: '03-'11 Charger/ Magnum/ Challenger/ RAM 1500 V8-4.7L/5.7L/6.1L Installation Instructions

Price:$536.25 Special Price:$429.00

aFe Power SCORCHER Tuner- '99-'10 Ford Diesel trucks

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 146hp and 359lbs. x ft. torque - Multiple tunes per application that can be changed to match the driving condition (performance, mileage, towing, etc.) - Easy to follow prompts - One of the easiest and funnest ways to increase power and improve driveability - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor APPLICATIONS: '99-'10 Ford Diesel Trucks F-250/350 V8

Price:$536.25 Special Price:$429.00

aFe Power SCORCHER Tuner- '97-'11 Ford Gas

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 25hp and 28lbs. x ft. torque - Contains multiple tunes per application that can be changed to match the driving condition (performance, mileage, towing, etc.) - Easy to follow prompts - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor - One of the easiest and fun ways to increase power and improve driveability APPLICATIONS: '97-'11 Ford Gas Mustang/ F-150/250/350 V6/V8 Installation Instructions

Price:$536.25 Special Price:$429.00

aFe Power SCORCHER Tuner- '01-'11 Chevy/GMC Diesel trucks

Mon, 06 Feb 2012 21:29:22 +0000

- Produces up to 120hp and 207lbs. x ft. torque - Multiple tunes per application that can be changed to match the driving condition (performance, mileage, towing, etc.) - Easy to follow prompts - One of the easiest and funnest ways to increase power and improve driveability - aFe has partnered with Supechips to develop the exclusive tunes to maximize all available power without sacrificing safety to the motor

Price:$536.25 Special Price:$429.00

$25 REBATE! Superchips Flashpaq Programmer- '01-'10 Chevy/ GMC Diesel

Mon, 06 Feb 2012 21:29:22 +0000

- Adjust speed and rev limiter on most vehicles - Tunes compatible with many hard part additions including cold-air-intake, exhaust, air filters, throttle body spacer - For vehicles requiring custom tuning to work with specific hard parts, tunes are avaiable for purchase through Superchips internet update store - Fan temperature on/off available on vehicles with electronic fan control - Read & clear diagnostic trouble codes standard on all vehicles - Superchips Optimized transmission performance included on all vehicles including shift points and firmness - Shift points and firmness controls available for many vehicles - Superchips tunes all transmissions for drivability improvements to deliver optimized vehicle performance - Advanced transmission tuning app available for purchase via Superchips internet update store - Allows you to return to stock, reset user values or save your settings for future use

Price:$379.00 Special Price:$339.99

$25 REBATE! Superchips Flashpaq Programmer- '99-'11 Chevy/ GMC Gas

Mon, 06 Feb 2012 21:29:22 +0000

Price:$379.00 Special Price:$339.99

$25 REBATE! Superchips Flashpaq Programmer- '03-'08 Dodge Gas

Mon, 06 Feb 2012 21:29:22 +0000

Price:$379.00 Special Price:$339.99

$25 REBATE!!! Superchips Flashpaq Programmer- '98-'10 Jeep

Mon, 06 Feb 2012 21:29:22 +0000

- Superchips exclusive CRAWL off-road tune - Tire size calibration of speedometer available on properly equipped Jeeps - Transfer case gear calibration on 2005 and newer Jeeps if properly equipped - Axle gear calibration on 2005 and newer Jeeps if properly equipped - 4WD-HI axle lock with auto-disengage safety feature - Tire Pressure Monitoring System threshold adjust - Real time idle control for running accessories - Superchips Optimized transmission performance standard on all Jeeps - Wide Open Throttle shift points tuned on most Jeeps - Shift firmness optimized on all Jeeps - Advanced transmission tuning product available on newer Jeeps allowing for custom shift schedules, firmness and shift points - Rev limiter adjustable on 2005 and newer Jeeps - Speed limiter adjustable on all Jeeps - Throttle body relearn available on newer Jeeps - Spark advance settings available on older model Jeeps - Fan temperature on/off available on Jeeps with electronic fan control - Read & clear diagnostic trouble codes standard on all vehicles APPLICATIONS: - '98-'06 Wrangler TJ 4.0L - '99-'01 Cherokee XJ 4.0L - '99-'04 Grand Cherokee WJ 4.0L, 4.7L, 4.7L HO - '05-'08 Grand Cherokee WK 4.7L, 5.7L HEMI - '06-'08 Commander 4.7L, 5.7L HEMI - '07-'10 Wrangler JK 3.8L

Price:$379.00 Special Price:$339.99

$25 REBATE!!! Superchips Flashpaq Programmer- '04-'09 Nissan/ Infiniti

Mon, 06 Feb 2012 21:29:22 +0000

Price:$379.00 Special Price:$339.99

$25 REBATE! Superchips Flashpaq Programmer- '98.5-'09 Dodge Diesel

Mon, 06 Feb 2012 21:29:22 +0000

- Actual Size 4.75”h x 3”w x ¾”d - Sleek design for one handed operation - Easier to use menus - New screen with dimmable backlight - Upgraded buttons for ease of use - NASA grade calibrations preloaded for Maximum performance - Adjust shift points and firmness - Adjust speed and engine rev limiter - Electronically correct speedometer and transmission shifting for non-stock tires, wheels and rear-end gear swaps - Read and clear check engine codes - Real-time vehicle sensor display - Data log driver and vehicle performance - Internet updateable - Tire smoking comes standard for all makes and models APPLICATIONS: - '98.5-'07 Ram 5.9L 24V Cummins - '07-'08 Ram Cummins 6.7L

Price:$379.00 Special Price:$339.99

$50 REBATE! Superchips Cortex Programmer- '99-'08 Ford

Mon, 06 Feb 2012 21:29:22 +0000

- Available Data Acquisition at www.superchips.com - Adjust Shift Points - Enhance Shift Firmness - Eliminate Speed Limiter - Recalibrate Speedometer for Larger Tire Sizes - Adjust RPM Limiter - Choose from up to Three Available Tuning - 95HP Tow & 137HP Performance - Up to three best-in-class tuning levels - Industry-Exclusive 2-year powertrain warranty comes with every product at no additional cost - Elegant, sleek, innovative design - Diagnostic Library retrieves, displays and clears DTC's - Log performance times & speeds, displays & stores PID data - Supports wheel, tire and gear swaps - Easy to install, Internet updateable APPLICATIONS: - '05-'08 Mustang - '99-'08 Expedition, F-series V8 Gas engine and diesel pickup/ Expedition - '04-'08 Ranger

Price:$429.00 Special Price:$379.99

$50 REBATE! Superchips Cortex Programmer- '99-'09 Chevy/GMC

Mon, 06 Feb 2012 21:29:22 +0000

- Available Data Acquisition at www.superchips.com - Adjust Shift Points - Enhance Shift Firmness - Eliminate Speed Limiter - Recalibrate Speedometer for Larger Tire Sizes - Adjust RPM Limiter - Choose from up to Three Available Tuning - 95HP Tow & 137HP Performance - Up to three best-in-class tuning levels - Industry-Exclusive 2-year powertrain warranty comes with every product at no additional cost - Elegant, sleek, innovative design - Diagnostic Library retrieves, displays and clears DTC's - Log performance times & speeds, displays & stores PID data - Supports wheel, tire and gear swaps - Easy to install, Internet updateable APPLICATIONS: - '99-'09 GM cars - '99-"08 GM Gas trucks - '01-'08 GM Diesel trucks

Price:$379.99

$50 REBATE!!! Superchips Cortex Programmer- '05-'07 Nissan/ Infiniti

Mon, 06 Feb 2012 21:29:22 +0000

Price:$429.00 Special Price:$379.99

$25 REBATE! Superchips Flashpaq Programmer- '99-'08 Ford Diesel

Mon, 06 Feb 2012 21:29:22 +0000

Price:$379.00 Special Price:$339.99

$25 REBATE! Superchips Flashpaq Programmer- '99-'08 Ford Gas

Mon, 06 Feb 2012 21:29:22 +0000

Price:$379.00 Special Price:$339.99

$50 REBATE! Superchips Cortex Programmer- '03-'08 Dodge

Mon, 06 Feb 2012 21:29:22 +0000

- Available Data Acquisition at www.superchips.com - Adjust Shift Points - Enhance Shift Firmness - Eliminate Speed Limiter - Recalibrate Speedometer for Larger Tire Sizes - Adjust RPM Limiter - Choose from up to Three Available Tuning - 95HP Tow & 137HP Performance - Up to three best-in-class tuning levels - Industry-Exclusive 2-year powertrain warranty comes with every product at no additional cost - Elegant, sleek, innovative design - Diagnostic Library retrieves, displays and clears DTC's - Log performance times & speeds, displays & stores PID data - Supports wheel, tire and gear swaps - Easy to install, Internet updateable APPLICATIONS: - '03-'07 Dodge cars - '04-'08 Dodge Gas trucks - ''03-'08 Dodge Diesel trucks

Price:$449.00 Special Price:$379.99

aFe Exhaust System- 5" Cat-Back 409 SS- '11-C Chevy/ GMC V8- 6.6 LML (diesel)

Mon, 06 Feb 2012 21:29:22 +0000

- Outflows the factory exhaust by 300cfm - Constructed out of durable 5" mandrel bent 409 stainless steel - Uses bayonet style hangers and band clamps for a hassle-free installation - Designed with no muffler and comes complete with all tubing, bayonet hangers and band clamps NOTE: This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$549.00

Sinister EGR Valve/Cooler Delete Kit- '07.5-'09 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

- Eliminates soot build up and clogged EGR Valves - Coolant temperatures run cooler because they are not running through EGR Cooler - Hot exhaust gasses are not being re-routed back into the motor - Coolant re-route hose included (no blocked off coolant hoses) - Completely replaces EGR Valve & EGR Cooler, No other parts required for installation - Includes transmission dipstick and coolant hose bracket - Includes detailed installation instructions - Exhaust manifold plates are tapped for EGT probe

Price:$129.00

Sinister EGR Valve/Cooler Delete Kit- '10-'11 Dodge Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

Price:$139.00

H&S EGR Cooler ONLY Delete- '07-08 Dodge Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Allows removal of the crossover tube, and EGR cooler - Necessary when upgrading to a larger turbo - Dress up the engine bay - Kit includes EGR Cooler block-off and installation hardware Installation Instructions
NOTE: This high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! Will cause check engine lights if not used with an H&S emissions delete tuner.

Price:$61.95

H&S EGR Cooler ONLY Delete- '09-'12 Dodge Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Allows removal of the crossover tube, and EGR cooler - Dress up the engine bay - Necessary when upgrading to a larger turbo - Kit includes EGR cooler block-off, cooler delete bracket, and installation hardware NOTE: This high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! Will cause check engine lights if not used with an H&S emissions delete tuner.

Price:$94.95

S&B Cold Air Intake Kit- '11 Ford Superduty V8-6.7L (diesel)

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 34.0% better than the stock intake when measuring just the resistance to airflow - Flows 14.6% better than the stock intake while loading the filter with ISO specified dust - 99.57% (Cotton Filter) Efficient at 580 CFM (ISO Course Dust) - Installs as easy as the original stock induction system

Price:$289.00

H&S Maxx Flow Intake Manifold- '07-'11 Dodge Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Comes with (4) 1/8" NPT ports for water methanol injection and nitrous nozzles - MUST be used in conjunction with an EGR Cooler Delete or Crossover Plug - Powder coated gloss black - Increased flow over stock intake horn - Pairs with the H&S Boost Tube for even more flow - Eliminates EGR solenoid mounting flanges and Throttle Control Valve Assembly - Includes new mounting hardware - Dresses up the engine compartment - Kit includes H&S Maxx Flow intake manifold, 4" to 3.5" reducing coupler, 4" clamp, OEM intake manifold gasket and bolt, H&S dipstick bracket and hardware, and crossover tube plug Installation Instructions
NOTE: Does NOT fit C&C models NOTE: This product removes the EGR system from your 6.7L Cummins. This high performance product is intended SOLELY for closed-course racing use and is not street legal in ANY state. This product cannot be used on any vehicles registered or certified for highway use. Please check your local, state, and federal laws before purchasing! Trucks WILL have a check engine light, unless used in conjunction with an H&S Tuner.

Price:$379.95

aFe Exhaust System 5" Cat-Back 409 SS- '11-C Chevy/ GMC V8- 6.6 LML (diesel)

Mon, 06 Feb 2012 21:29:22 +0000

- Outflows factory exhaust by 300cfm - Constructed out of durable 5" mandrel bent 409 stainless steel - Uses bayonet style hangers and band clamps for a hassle-free installation - Comes with a free flowing muffler, all tubing, bayonet hangers and band clamps - Finished off with a black powdercoated 304 stainless steel, rolled, slash cut tip NOTE: This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$599.00

Zone Products Steering Stabilizers- '99-'06 Chevy/GMC

Mon, 06 Feb 2012 21:29:22 +0000

- 5/8" hardened and double chromed rod - 1 3/8" diameter piston - Double welded eyelet - Urethane bushings APPLICATIONS: - '99-'06 Sierra/ Silverado1500 4WD - '00-'06 Suburban/ Yukon XL 4WD - '00-'06 Tahoe/ Yukon 4WD Click for installation instructions
NOTE: These stabilizers will only work with lift kits NOT using a dropped center link steering system.

Price:$73.95

Zone Products Steering Stabilizers- Dodge

Mon, 06 Feb 2012 21:29:22 +0000

- 5/8" hardened and double chromed rod - 1 3/8" diameter piston - Double welded eyelet - Urethane bushings NOTE: For 2001 model listing, kit will not work with vehicles equipped with a dropped pitman arm.

Price:$41.95

24V Cummins Simultaneous Valve Spring Compressor Tool

Mon, 06 Feb 2012 21:29:22 +0000

This tool is used to simultaneously remove & replace the valve springs on the 1998.5 - 2009 Dodge Ram Cummins 24 Valve 5.9L engine. The spring compressor is made from billet 6061T6 for years of use.

Price:$144.00

Zone Products Steering Stabilizers- Ford

Mon, 06 Feb 2012 21:29:22 +0000

- 5/8" hardened and double chromed rod - 1 3/8" diameter piston - Double welded eyelet - Urethane bushings - Expanded twin tube design - Custom valved to handle larger tires - Available in black or white NOTE: ZON3301 & ZON7301 are designed to replace the factory steering stabilizer and re-use the factory mounts. If you do not have an O.E. steering stabilizer, the tie rod mount will have to be purchased from a Ford dealer.

ZON3300 and ZON7300 are for use with Zone Offroad 4-6" lifts only!

Price:$42.95

Zone Products Steering Stabilizers- Jeep

Mon, 06 Feb 2012 21:29:22 +0000

Price:$39.95

Fass Standard Fuel Pumps - Dodge

Mon, 06 Feb 2012 21:29:22 +0000

If its strength and reliability you want from your fuel pump look no further. The FASS fuel pump offers peace of mind to the user, knowing that they are running with the leading fuel pump in the market today. Flow rates from 90 – 260gph and fuel pressure from 0 – 160psi!

Price:$393.30

Air Dog Fuel Pickup Module Upgrade Kit For In-Tank Pumps - Dodge

Mon, 06 Feb 2012 21:29:22 +0000

The AirDog High Flow Fuel Module Upgrade Kit was developed to retrofit the stock Dodge fuel pickup assembly to eliminate the need for a new pickup tube assembly, or "Draw-Straw", on trucks with in-tank equipped fuel pumps. The installation of this kit also provides 1/2" fuel delivery to the AirDog Fuel System wile maintaining the stock baffle design, preventing quarter tank fuel starvation. This kit is intended to be used any 1998.5-2009 Dodge Cummins with our without an in-tank mounted fuel pump. This kit is for modifying your existing fuel module. It is not a replacement module.

Price:$64.95

aFe Stage 2 Si Cold Air Intake System- '11-C Ford Superduty V8 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Produces an incredible 21hp and 55lbs. x ft. torque! - Outflows factory intake by 38% - Intake is fully sealed in a highly engineered rotomolded airbox with two built-in auxiliary air scoops for a maximum air intake charge - Hassle free installation utilizing factory mounting points - Stainless steel aFe Power plate for a rugged underhood appearance

Price:$415.00

FASS Adjustable Fuel Pump - Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

- Allows the customer to tweak the fuel pressure on the "Fly" - Boost Compensation Port gives pump added fuel pressure based on boost referencing from the turbo keeping fuel pressure in line with needs of the engine - Flow rates from 90 – 260gph - Fuel pressure from 0 – 100psi - Applications for '94-'11 Dodge Cummins

Price:$459.00 Special Price:$436.05

FASS Adjustable Fuel Pump- Ford Powerstroke

Mon, 06 Feb 2012 21:29:22 +0000

Price:$559.00 Special Price:$531.95

FASS Adjustable Fuel Pump- Chevy Duramax

Mon, 06 Feb 2012 21:29:22 +0000

Price:$459.00 Special Price:$436.95

CSI 24 Piece Bungee Assortment Pack

Mon, 06 Feb 2012 21:29:22 +0000

- Elastic design provides constant tension and a firm hold - Vinyl coated steel hooks and woven polyester strap will not mar finish - Set includes: (8) 12", (2) 30", (6) 18", (2) 36", (4) 24" and (2) 48"

Price:$12.95

CSI D-Ring Shackles

Mon, 06 Feb 2012 21:29:22 +0000

- Powder coated for durability - Great for recovery applications - Available in 3.25 or 4.75 ton ratings - Fits 3/4" diameter hole

Price:$7.95

CSI Tow Hooks

Mon, 06 Feb 2012 21:29:22 +0000

- Available in chrome or powder coated finishes - Powder coated option for added durability - Supports up to 10,000 lbs - Receiver tow hook fits 2" receivers & has 7,500 lb. capacity

Price:$6.95

CSI Recovery Straps

Mon, 06 Feb 2012 21:29:22 +0000

- Rated up to 18,000 lbs - Made of nylon with re-enforced ends - Available in three sizes

Price:$22.95

ReadyLIFT T6 Billet Suspension 2.25" Leveling Kit- '07-'11 Chevy/ GMC

Mon, 06 Feb 2012 21:29:22 +0000

- Fit and function for larger tires and wheels - Made in the USA using only premium 6061 T6 aircraft billet aluminum - Includes 10.9 rated mounting hardware and associated kit parts - Direct bolt-on applications maintaining the factory ride and factory alignment specifications - No cutting or drilling required - Available in tough anodized Black, Silver, Blue, and Red finishes, and are laser etched with ReadyLIFT Suspension logo - ReadyLIFT Lifetime Warranty Included APPLICATIONS: - '07-'11 Chevy Silverado 1500 - '07-'11 GMC Sierra 1500 - '07-'11 Escalade Click here for installation instuctions

Price:$346.95

ReadyLIFT T6 Billet Suspension 2" Leveling Kits- '94-'11 Dodge Ram

Mon, 06 Feb 2012 21:29:22 +0000

- Fit and function for larger tires and wheels - Made in the USA using only premium 6061 T6 aircraft billet aluminum - Includes 10.9 rated mounting hardware and associated kit parts - Direct bolt-on applications maintaining the factory ride and factory alignment specifications - No cutting or drilling required - Available in tough anodized Black, Blue, Red, and Silver finishes, and are laser etched with ReadyLIFT Suspension logo - ReadyLift Lifetime Warranty Included Click here for installation instructions (P/N 6-1090)
Click here for installation instructions (P/N T6-1030)

Price:$239.95

ReadyLIFT T6 Billet Suspension Leveling Kits- Ford

Mon, 06 Feb 2012 21:29:22 +0000

- Fit and function for larger tires and wheels - Made in the USA using only premium 6061 T6 aircraft billet aluminum - Includes 10.9 rated mounting hardware and associated kit parts - Direct bolt-on applications maintaining the factory ride and factory alignment specifications - No cutting or drilling required - Available in tough anodized Black, Silver, Red and Blue finishes, and ReadyLIFT Suspension logo - ReadyLIFT Lifetime Warranty Included Click here for installation instructions: T6-2058
T6-2059
T6- 2111

Price:$194.95

ReadyLIFT T6 Billet Suspension Leveling Kits- '07-'11 Jeep Wrangler

Mon, 06 Feb 2012 21:29:22 +0000

- Fit and function for larger tires and wheels - Made in the USA using only premium 6061 T6 aircraft billet aluminum - Includes 10.9 rated mounting hardware and associated kit parts - Direct bolt-on applications - No cutting or drilling required - Available in tough anodized Black, Silver, Red and Blue finishes, and are laser etched with ReadyLIFT Suspension logo - ReadyLIFT Lifetime Warranty Included Click for installation instructions

Price:$259.95

ReadyLIFT T6 Billet Suspension Leveling Kits- '04-'10 Nissan Titan

Mon, 06 Feb 2012 21:29:22 +0000

- Fit and function for larger tires and wheels - Made in the USA using only premium aircraft billet aluminum - Includes 10.9 rated mounting hardware and associated kit parts - Direct bolt-on applications maintaining factory ride and factory alignment specifications - No cutting or drilling required - Available in tough anodized Black, Silver, Red and Blue finishes, and are laser etched with ReadyLIFT Suspension logo - ReadyLIFT Lifetime Warranty Included Click for installation instructions: T6-4000
T6-4010

Price:$239.95

ReadyLIFT T6 Billet Leveling Kits- '05-'11 Toyota

Mon, 06 Feb 2012 21:29:22 +0000

- Fit and function for larger tires and wheels - Made in the USA using only premium 6061 T6 aircraft billet aluminum - Includes 10.9 rated mounted hardware and associated kit parts - Direct bolt-on applications maintaining factory ride and factory alignment specifications - No cutting or drilling required - Available in tough anodized Black, Silver, Red, and Blue finishes, and are laser etched with ReadyLIFT Suspension logo - ReadyLIFT Lifetime Warranty Included Click for installation instructions: T6-5055
T6-5075

Price:$239.95

TS Performance Switchable Chips- '95-'03 Ford Powerstroke 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- Chips available for both towing and racing: For towing, we recommend either 50 hp or 75 hp chip. 100 hp or 140+ hp chips available for racing. - Immediate difference in power! - Increases horse power and torque - Firms up shift points to allow your truck to slip- not slam- into gear - Easy and simple to install - Chip slides into your computer- no taping necessary! - Step by step instructions included - 2-4 mpg increase (depending on individual driving habits) Performance Gains: - TS Performance 50 hp Chip - 50 to your rear wheels - TS Performance 75 hp Chip- 75 to your rear wheels - TS Performance 100hp Chip- 100hp to your rear wheels - TS Performance 140hp+ extreme - over 140hp to your rear wheels

Price:$286.95

MADS Smarty Junior J-67ME Programmer- '07-'10 Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- CaTCHER software is inside - Three different performance levels: 40/ 70/ 100 hp - Improved fuel economy - Optimized drivability - Fastest download in the industry- up to three times faster than the competition! (a typical ECM update takes about 5 minutes) - ABS tire height updates in just seconds from 22.5" to 44" - Manual High-Idle enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses to pull - USB built in for simple updates - Easy installation - Reliable- works off your OEM hardware - Programmable parameters for fine tuning - Power on Demand function

Price:$495.00

MADS Smarty S-67ME Programmer- '07-'09 Cummins6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Ability to delete the EGR/ DPF code free - Late injection events (4th inj) disabled - No exhaust thermocouples simulators required - CaTCHER software is inside - Ten different performance levels - Fastest download in the industry- up to three times faster than the competition! (a typical ECM update takes about 5 minutes) - ABS tire height update in just seconds - Manual High-Idle is enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses pull - USB built in for simple updates - Most reliable keyboard in the industry - Reliable- works off your OEM hardware - Programmable speed limiter from 25- 250 mph - Programmable parameters for fine tuning - Power on Demand

Price:$685.00

SCT SF3 Power Flash Programmer- '99-'07 Ford Powerstroke 6.0L/ 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- Increases horsepower and torque - stores three custom tunes - Huge backlit LCD display - High speed Datalogging/ Monitoring - Reads/ Clears DTC trouble codes - Easy restoration back to stock - Dual analog inputs - Most popular vehicles supported - Installs quickly and easily - USB interface cable included - User adjustable vehicle parameters APPLICATIONS: - '05-'07 Powerstroke 6.0L (diesel) - '03-'04 Powerstroke 7.3L (diesel) - '99-'03 Powerstroke 7.3L (diesel) - '03-'05 Excursion 6.0L (diesel) - '99-'03 Excursion 7.3L (diesel)

Price:$379.00

MADS Smarty SSR Programmer- '03-'07 Cummins 5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Race performance CaTCHER software is inside - More than 15 billion possible tuning customizations - Fastest download in the industry- up to three times faster than the competition (a typical ECM update takes about 3.5- 5 minutes, depending on your truck model) - ABS tire height updates in just seconds - Not traceable in stock setting- Smarty leaves no footprint - Manual High-Idle is enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses to pull - USB built in for simple update - Most complete keyboard in the industry - Reliable- works off you OEM hardware - Programmable speed-limiter from 25- 250 mph - RPM limiterup to 4200 - Power on Demand

Price:$735.00

NEW DESIGN! aFe Stainless Steel Exhaust Tips (4" x 7" x 18")

Mon, 06 Feb 2012 21:29:22 +0000

- 304 Stainless Steel - Wrinkle Black Finish - 304 Stainless Steel Band Clamp - Inlet 4" x Outlet 7" x massive 18" Length - aFe "Power" logo plate - Supersedes: 49-92023

Price:$159.00

Firestone Rear Helper Air Springs- '05-'11 Toyota Tacoma 4WD

Mon, 06 Feb 2012 21:29:22 +0000

- No drill installation - Added level load capacity of 5000 lbs. - Side to side adjustment to keep loads level - Limited Lifetime warranty - Increases vehicle stability - Improves ride Cllick for installation instructions

Price:$295.00

Firestone Rear Helper Air Springs- '05-'11 Toyota Tacoma 2WD

Mon, 06 Feb 2012 21:29:22 +0000

Price:$295.00

Edge Products Evolution Programmer- '94- '03 Ford 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- 3 Separate Performance Programs - Quick and Easy Installation - Additional 100 HP and 200 ft lb Torque - Increases Fuel Economy* - Displays and Clears Trouble Codes - Displays 0-60 and Quarter Mile Times - Adjusts Speed and Rev Limiter - 0-60 and Quarter mile performance tests while leaving the programmer attached NOTE: This product may NOT be legally used on public highways, streets, or other roads and may NOT be used for purposes other than off-road, legal racing/competitions uses.

Price:$323.95

$15 REBATE or FREE DASH MOUNT! Edge Evolution CS Diesel Tuner- Ford/ Chevy/ GMC

Mon, 06 Feb 2012 21:29:22 +0000

- Full-color, high-resolution, button-controlled 2.4 inch screen - Multiple power levels for Mileage, Towing and Performance - One part number for diesel vehicles for ALL OEM applications (as they become available) - Compatible with optional EGT pyrometer for engine protection ( view accessories by clicking here) - Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories ( view accessories by clicking here) - Includes light sensitivity meter to dim screen as ambient light decreases - Internet updateable (cable included) - Displays and clears Diagnostic Trouble Codes - Displays Alerts and Records such as RPM, MPH and EGT - 0-60 and Quarter-Mile performance test with drag-strip, Christmas-tree lighting (graphs speed and time on screen) - Displays up to 8 parameters at a time in digital display mode - Monitors and displays Diesel Particulate Filter (DPF) status on new emission diesel trucks - Ships with a universal suction cup mount and is compatible with all Edge custom dash pods and pillar mounts (sold separately) Click for installation instructions
APPLICATIONS: - '01-'10 Chevy Silverado 2500, 3500, 4500, 5500 6.6L Duramax - '94-'03 Ford F250, F350 7.3L - '03-'07 Ford F250, F350 6.0L - '08-'10 Ford F250, F350 6.4L - '00-'03 Ford Excursion 7.3L - '03-'05 Ford Excursion 6.4L - '01-'10 GMC Sierra 2500, 3500, 4500, 5500 6.6L Duramax * Will not work on LB7 or LLY with a manual transmission

Price:$623.95 Special Price:$499.00

4" Series II Suspension

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: Front: Lifted coil springs, lower fixed control arms, bumpstop extensions, sway-bar links and brackets and hardware. Rear: Lifted coils springs, upper and lower fixed control arms, bumpstop brackets, sway-bar brackets, brakeline relocation bracket and track bar bracket. Shocks: Kit includes (4) Hydro 8000 shocks.

Price:$599.00

PPE Xcelerator Programmer- '03-'09 Ford Powerstroke

Mon, 06 Feb 2012 21:29:22 +0000

- Two to ten power levels each with additional horsepower and torque - Read and clear Diagnostic Trouble Codes (DTC) - Kit includes programmer, owner's manual, OBD-II Cable, and foam-padded carrying case NOTE: Legal in California only for racing vehicles which may never be used upon a highway.

Price:$679.99 Special Price:$611.95

PPE Xcelerator Programmer- '06 Hummer H1 (diesel)

Mon, 06 Feb 2012 21:29:22 +0000

- Up to an additional 280hp - Increases fuel mileage (2-3mpg on average) - Speedometer corrections (for tire sizes ranging from 25" to 44.75" in Â¼ increments, and/or gear changes from 2.23 to 5.13) - Governor removals - Seven levels of performance - Program levels 1 through 7 will remove fuel (defuel) from engine during shifts as needed to keep an un-modified transmission from slipping - Raises the rev limiter to 3,800RPM - Retains the stock program so that the truck can be put back to the original settings if the need arises NOTE: Legal in California only for racing vehicles which may never be used upon a highway. NOTE: This unit delivers extreme horsepower and torque. Upgrades to the drivetrain are highly recommended!

Price:$1,296.00 Special Price:$1,166.95

PPE Xcelerator Race/ Marine Programmer- '01-'10 Duramax

Mon, 06 Feb 2012 21:29:22 +0000

- Six power levels each with additional horsepower and torque to tune your race vehicle for track conditions/restrictions - Speedometer corrections (for tire sizes from 27" through 44" at 1/4" increments) - Adjustable speed limiter (from 40 to 96 mph in 1 mph increments or directly to 200 mph) - Removes torque limiting, even in extremely deep sandy track conditions - Read and clear Diagnostic Trouble Codes (DTC) - Read real-time data (for engine diagnostics) - Transmission reset and quick learn feature - Improves drag strip elapsed times - Not compatible with emissions controlled vehicles - Calibration enhances free flowing full race exhaust and air intake systems - Allows for the use of all specially formulated racing diesels as required by a particular sanctioned event APPLICATION: 2001-2010 Duramax LB7/LLY/LBZ/LMM Diesel engines NOTE: These components have been designed and are intended for closed course competition only! Performance products are legal in California only for sanctioned closed course racing vehicles, which may never be used on a public highway.

Price:$1,079.95

PPE Xcelerator GS Programmer- Cadillac/ Chevy/ GMC/ Hummer/ Pontiac (Gas engines)

Mon, 06 Feb 2012 21:29:22 +0000

- 3 tuning settings: Performance, Towing and Economy - Plug-n-play programmer with factory OBD2 connector. 2-year warranty - Gas Powered: Cadillac, Chevrolet, GMC, Hummer, Pontiac (See below for specific models) APPLICATIONS (all gas engines): - '99-'05 Cadillac Escalade 5.3L, 5.7, 6.0L - '98-'00 Chevy Full-size truck/van 4.3L, 5.0L, 5.7L, 7.4L - '99-'05 Chevy full-size truck/van 4.8L, 5.3L, 6.0L, 8.1L - '98-'04 Chevy S10/Blazer 4.3L - '98-'04 Corvette 5.7L - '99-'05 GMC Denali 5.7L, 6.0L - '98-'00 GMC full-size truck/van 4.3L, 5.0L, 5.7L, 7.4L - '99-'05 GMC full-size truck/van 4.8L, 5.3L, 6.0L, 8.1L - '98-'04 GMC Sonoma/ Jimmy 4.3L - '03-'05 Hummer H2 6.0L - '99-'02 Pontiac Firebird/Trans Am 5.7L - '04 GTO 5.7L NOTE: Legal in California only for racing vehicles which may never be used upon a highway.

Price:$419.95 Special Price:$378.00

PPE Xcelerator Programmers- '01-'10 Chevy/GMC Duramax LB7/ LLY/ LBZ/ LMM

Mon, 06 Feb 2012 21:29:22 +0000

- Power levels range from an additional 120 HP up to an incredible 425hp! - Saves Fuel! Improves fuel mileage by 1-2 mpg - Guaranteed! - Up to 10 Power level tunes - Tire size speedometer corrections from Tire Sizes 25.00" to 44.75" - Speed Limiter Adjustable from 40 to 200MPH in 1 MPH increments - Gear Ratio Adjustable from 2.73 to 5.13 - Simple download into the OBD II port under the dash - USB side port for easy online software updates - 1-year warranty NOTE: Legal in California only for racing vehicles which may never be used upon a highway.

Price:$449.95

NEW DESIGN! AFE Power Stainless Steel Exhaust Tips (4" X 5" X 12")

Mon, 06 Feb 2012 21:29:22 +0000

- 304 Stainless Steel - Available in wrinkle black finish or mirror polished finish - 304 SS Band Clamp - aFe POWER Plate - 4" Inlet x 5" Outlet x 12" Length - Supersedes : 49-90002

Price:$59.95

CSI Cambuckle Tiedowns

Mon, 06 Feb 2012 21:29:22 +0000

- Made of high quality nylon webbing for strength - Powdercoated "S" hooks for lasting good looks and durability - 1" wide with 3000 lb. working load limit

Price:$9.95

CSI Ratchet Tie-Downs

Mon, 06 Feb 2012 21:29:22 +0000

- High quality nylon webbing - Strong ratchet with ergonomic handle for added tension - Available in either double "J" hook, or "S" hook with spring-loaded clasp, or heavy-duty hook with spring-loaded clasp - 800lb to 1,000lb. Working Load Limit

Price:$13.95

S&B Cold Air Intake System- '92-'00 Chevy/GMC Duramax 6.5L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 42.7% better than the stock intake when measuring just the resistance to airflow - Flows 33.7% better than the stock intake while loading the filter with ISO specified dust - 99.48% Efficient @ 643 CFM (ISO Course Dust) NOTE: Some 97-98 6.5L trucks were made with a MAF sensor between the turbo and stock airbox. This kit will NOT work with these vehicles.

Price:$299.00

NEW DESIGN! aFe Stainless Steel Exhaust Tips (4" x 6" x 18")

Mon, 06 Feb 2012 21:29:22 +0000

- 304 Stainless Steel for secure grip - Available in wrinkle Black or Mirror Polish finishes - 304 SS Band Clamp - 4" Inlet x 6" Outlet x massive 18" Length - Laser-cut aFe POWER logo plate - Supersedes : 49-92003 - Special high-temp black powder-coat option is heat resistant up to 1600 degrees F

Price:$129.00

NEW DESIGN aFe Stainless Steel Exhaust Tips (3.5" x 4.5" x 12")

Mon, 06 Feb 2012 21:29:22 +0000

- 304 Stainless Steel for secure grip - Available in wrinkle Black or Mirror Polish finishes - 304 SS Band Clamp - 3.5" Inlet x 4.5" Outlet x 12" Length - Laser-cut aFe POWER logo plate - Supersedes : 49-92003 - Special high-temp black powder-coat option is heat resistant up to 1600 degrees F

Price:$129.00

NEW DESIGN! aFe Stainless Steel Exhaust Tips (4" x 6" x 15")

Mon, 06 Feb 2012 21:29:22 +0000

- 304 Stainless Steel for secure grip - Available in wrinkle Black or Mirror Polish finishes - 304 SS Band Clamp - 4" Inlet x 6" Outlet x massive 15" Length - Laser-cut aFe POWER logo plate - Supersedes : 49-90018 - Special high-temp black powder-coat option is heat resistant up to 1600 degrees F

Price:$99.00

NEW DESIGN! aFe Stainless Steel Exhaust Tips (5" x 6" x 15")

Mon, 06 Feb 2012 21:29:22 +0000

- 304 Stainless Steel for secure grip - Available in wrinkle Black or Mirror Polish finishes - 304 SS Band Clamp - 5" Inlet x 6" Outlet x massive 15" Length - Laser-cut aFe POWER logo plate - Supersedes : 49-92003 - Special high-temp black powder-coat option is heat resistant up to 1600 degrees F

Price:$79.95

CSI Ball Mounts

Mon, 06 Feb 2012 21:29:22 +0000

- Available in black powder coat or all steel construction - Available in various drop heights - Designed to fit standard 2" receivers

Price:$3.00

Chrome Hitch Balls

Mon, 06 Feb 2012 21:29:22 +0000

- CNC machined for precision fit - Manufactured using hot forged steel - Chrome plated for durability - V5 rated

Price:$5.95

H&S Performance EGR/Cooler Delete-Dodge '07-'08 6.7

Mon, 06 Feb 2012 21:29:22 +0000

- Allows removal of the EGR assembly, crossover tube, and EGR cooler - Dress up the engine bay - Billet aluminum - Necessary when upgrading to a larger turbo - Kit includes EGR Block-Off, EGR Coolor Block-Off, EGR Gaskets, installation hardware

Price:$99.00 Special Price:$94.05

H&S EGR Delete- '07-'12 Dodge 6.7

Mon, 06 Feb 2012 21:29:22 +0000

- Allows removal of the EGR assembly - Dress up the engine bay - Billet aluminum NOTE: Will cause check engine lights if not used with an emissions delete tuner. Click here to view installation instructions

Price:$69.00 Special Price:$65.55

PPE Xcelerator Programmers- Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

- Two to three power levels each with additional horsepower and torque - Reads and clears Diagnostic Trouble Codes (DTC) - Speedometer corrections (for tire sizes 25" through 44.75" at 1/4" increments) - Adjustable speed limiter - "Power Take Off" feature - Diesel particulate filter mobile de-soot feature - Cruise control high idle enabled at the end of every download - Includes owner's manual, OBD-II port cable, foam-padded carrying case, and PPE badges NOTE: Legal in California only for racing vehicles which may never be used upon a highway.

Price:$679.95

Chilkat Designs Custom Tie Rod

Mon, 06 Feb 2012 21:29:22 +0000

- Each Tie Rod uses 3/4" chromoly hiems at both ends - Optional hardware package includes, (4) safety washers and (2) 3/4" Grade 8 nuts and bolts NOTE: We will need your Tie Rod measurement. In order to receive a proper fitting Tie Rod on your custom ride, simply set your toe and measure the distance between the Tie Rod bolt holes (eye to eye). NO RETURNS ON CUSTOM TIE RODS.

Price:$135.00

MBRP Exhaust Stack System- '01-'07 Chevy/GMC

Mon, 06 Feb 2012 21:29:22 +0000

- Rugged T409 stainless steel construction - Rich, mellow exhaust note - Installs with common hand tools - Eliminates muffler - Boosts torque and horsepower - Classic look Printable Installation Guide

Price:$609.00

Glacier Diesel "Air-Boss VP" Intake Plenum Cover & Grid Heater Delete Kit

Mon, 06 Feb 2012 21:29:22 +0000

EGT's running too high? Can't use all of the fuel you have available? The Air-Boss VP plenum gives the largest bolt-on flow increase possible short of milling the cast plenum off the head and installing a fabricated intake plenum. The Air-Boss VP isn't just a replacement flat aluminum plate as seen in other designs. The Air-Boss VP is an internally elevated plate designed to flow as much air as possible to cylinders 4, 5, and 6. Turning ramps at the plenum entrance aid incoming air thru the transition area. With our plate design we open up the plenum area to the starving rear cylinder by a full 20%. By increasing airflow to the rear cylinders we reduce EGT's and allow you to run even higher fueling levels. The Air-Boss VP plenum kit also includes a shortened grid heater delete block to maintain the factory IC piping to intake manifold connection geometry . Maintaining this geometry makes the Air-Boss VP compatible with ALL aftermarket intake manifolds and the stock mounting hardware. Grid Heater options: A) The standard Air-Boss VP kit includes a custom height grid heater delete block. B) For colder climates we now offer the Air-Boss VP with a grid heater option. This option uses the factory grid heater (no delete included) and custom length stainless steel studs to accomodate the increased plenum height of the Air-Boss VP. C) For customers that want to swap back and forth between the heater and delete block we offer both item in one package. Kit includes Air-Boss VP intake plenum plate, factory gaskets, custom height grid delete block and/or optional stainless steel studs.

Price:$299.00 Special Price:$249.00

Glacier Diesel Grid Heater Replacement Block

Mon, 06 Feb 2012 21:29:22 +0000

The Pro-Flo is a solid, billet aluminum riser that replace the restrictive grid heater block on all '94-'07 Cummins 5.9 powered Dodge Rams. When every last CFM of cold air counts the Pro-Flo lets it in! Maximum air flow for modified trucks and trucks not requiring grid heaters. Note: Two new Cummins intake manifold gasket required when not purchased with a Power-Flo intake manifold.

Price:$99.00 Special Price:$69.00

'94-'07 Cummins 5.9L Grid Heater/Intake Manifold Gasket

Mon, 06 Feb 2012 21:29:22 +0000

Factory '94-'07 Cummins 5.9L Grid Heater/Intake Manifold Gasket. Latest semi-metallic gasket for correct grid heater grounding.

Price:$5.99

Sway-A-Way Nissan OEM Replacement Coilover Front & Rear Shock Kits 5" Rancho Lift

Mon, 06 Feb 2012 21:29:22 +0000

Price:$583.00

Sway-A-Way Nissan OEM Replacement Coilover Front & Rear Shock Kits (UNI BALL UPPER ARM REQ)

Mon, 06 Feb 2012 21:29:22 +0000

Price:$583.00

RAM Mirror-Mate Mounting Kit for Bully Dog PMT- Dodge, Ford, Nissan, & Jeep

Mon, 06 Feb 2012 21:29:22 +0000

- Easy installation - Includes custom designed half dome adaptors, which upgrade the PMTs 3/4" cradle ball to a 1", ensuring that the heavy duty arm fits tightly over the PMT cradle ball - Heavy duty construction - Convenient mounting location - Lifetime Warranty (applies only to RAM parts) NOTE: All Bully Dog electronics require a cable extension kit when used in conjunction with a Mirror-Mate. Bully Dog extension kit part number 40010 includes all parts and pieces necessary for proper extension. See install diagrams for details.

Price:$39.99

RAM Suction Cup Mounting Kit for Bully Dog PMT

Mon, 06 Feb 2012 21:29:22 +0000

- Amazing holding power - Mounts to multiple surfaces - Fully adjustable - Suction cup works on any vehicle application - Lifetime Warranty

Price:$39.99

5' HDMI and Power Extension Kit

Mon, 06 Feb 2012 21:29:22 +0000

Kit includes: - 5' male to female HDMI cable - 5' 20 gauge power cable - Butt connector for power wire extension

Price:$19.99

aFe Magnum Force Stage 2 Sealed Air Intake System- '11 Ford Powerstroke V8- 6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Value Pack includes one Pro DRY S filter, one pre-filter, and one filter cleaning kit - Easy to install utilizing factory mounting points - Heat-insulating molded plastic intake tube is engineered for improved volumetric efficiency and maximum performance

Price:$435.95

RAM Mirror-Mate Mounting Kit for Bully Dog PMT- GM/Chevy

Mon, 06 Feb 2012 21:29:22 +0000

- Easy installation - Includes custom designed half dome adaptors which upgrade the PMTs 3/4" cradle ball to a 1", ensuring that the heavy duty arm fits tightly over the PMT cradle ball - Heavy duty construction - Convenient mounting location - Lifetime Warranty (applies only to RAM parts) NOTE: All Bully Dog electronics require a cable extension kit when used in conjunction with a Mirror-Mate. Bully Dog extension kit part number 40010 includes all parts and pieces necessary for proper extension. See install diagrams for details.

Price:$39.99

Zone 6" Suspension Lift Kit- '88-'98 Chevy/GMC 1/2-Ton Truck

Mon, 06 Feb 2012 21:29:22 +0000

- Upper control arm relocation bracket system. - Uses factory knuckles to allow fitment of factory wheels. - No track width change. - Diffential skid plate included to protect the front differential and lock the crossmembers together - 1/4" thick steel used to make indestructable crossmembers - 3-point differential mounting system correctly positions the differential so the factory driveshaft can be used NOTE: - Torsion bar un-loading tool required - Requires exhaust modification to clear the front driveshaft - Requires frame bracket modification and differential mount modification

Price:$1,195.95

RAM Mirror-Mate Mounting Kit for BullyDog GT/WatchDog- Ford, Dodge, Nissan, & Jeep

Mon, 06 Feb 2012 21:29:22 +0000

- Easy installation - Custom T-Slot adapter is designed to work specifically with the GT or WatchDog - Works with Ford, Dodge, Nissan, and Jeep Vehicle Applications - Heavy Duty Construction - Convenient Mounting Location - Lifetime Warranty (applies only to RAM® parts) NOTE: All Bully Dog electronics require a cable extension kit when used in conjunction with a Mirror-Mate. Bully Dog extension kit part number 40010 includes all parts and pieces necessary for proper extension.

Price:$39.99

RAM Mirror-Mate Mounting Kit for BullyDog GT/WatchDog- GM/Chevy

Mon, 06 Feb 2012 21:29:22 +0000

- Easy installation - The custom T-Slot adaptor is designed to work specifically with the GT or WatchDog - Works with GM vehicle applications - Heavy-duty construction - Convenient mounting location - Lifetime warranty (applies only to RAM parts) NOTE: All Bully Dog electronics require a cable extension kit when used in conjunction with a Mirror-Mate. Bully Dog extension kit part number 40010 includes all parts and pieces necessary for proper extension.

Price:$39.99

Sky Manufacturing Toyota Billet Steering Arms

Mon, 06 Feb 2012 21:29:22 +0000

CNC Machined billet steel Toyota steering arms for over the spring steering. Use's factory studs and conical washers, tapered for Toyota rod ends, commonly used are 23mm FJ-80 ends, see below for more info. These will allow crossover steering, placing the tie rod above the leaf springs, and using an IFS steering box on pre-86 style solid axle Toyota trucks and Four Runners. They will also be needed for Solid Axle Conversions on 86 newer style IFS trucks.

Price:$194.00

Toyota Knuckle Studs

Mon, 06 Feb 2012 21:29:22 +0000

Toyota Steering Arm/Knuckle Stud Kit. $7.00 each

Price:$7.00

Bushwacker Extend-A-Fender Flares- '07-'11 GMC Sierra

Mon, 06 Feb 2012 21:29:22 +0000

- Installs neatly in minutes with no drilling - Design integrates with aftermarket front bumpers - OEM matte black finish is easy to paint to match/accent - Available in an assortment of fleetside bed lengths - Available as a set of four, or a pair

Price:$0.00

Sky Manufacturing Toyota Heavy Duty Tie Rod

Mon, 06 Feb 2012 21:29:22 +0000

Replacement Toyota High Steer heavy duty tie rod with FJ-80 Ends. Also available in standard low steer configuration. USA made 1.250od .250 wall DOM tube, with high grade fj-80 ends Low steer tie rod will fit standard Toyota mini truck axles from 1979-85. Also available for some Fj-40 land cruisers ( call for info ) Testing has shown this Tie rod to be over 100% stronger than factory. Does not include stabilizer mounting for factory stabilizer, we have aftermarket stabilizer kits available separately.

Price:$94.00

Sky Manufacturing Toyota 23mm Pitman Arm adapter

Mon, 06 Feb 2012 21:29:22 +0000

Toyota 23mm pitman arm adapter features FJ-80 tapered hole. Designed to adapt High Steer kit to stock pitman arm.

Price:$32.00

Sky Manufacturing Toyota IFS Box Mounting Kit

Mon, 06 Feb 2012 21:29:22 +0000

When mounting an IFS Toyota Steering box, you will need this simple kit to aid in the installation process. Kit includes sleeves for going through the frame, upper above the frame mount, and the bolts to hold the box to the frame. We use 1/2 inch hardware and thus it is required that you slightly drill your IFS box to fit the American hardware. The amount you need to drill is under 1/16th of an inch.

Price:$15.00

Sky Manufacturing Toyota High Steer Kit, IFS Box, and Stabalizer Kit

Mon, 06 Feb 2012 21:29:22 +0000

Arms are USA CNC machined Chromemoly steel, life time warranty against cracking, snapping, bearing pin failure. Does not cover failure to keep steering knuckle studs tight. Tubing is 1.250 OD .250 wall USA made machined in house. Heavy duty box mount is USA made, laser cut, not stamped USA steel. Tie rod ends are a non grease able version, we have had much better luck with these then the Russian/Indian grease able version. 1 year warranty against stud failure. Steering box is a cleaned, pressure tested, inspected box, 86-95, if you would like a specific year, please call for availability.

Price:$549.00

Sky Manufacturing Toyota IFS Steering Box

Mon, 06 Feb 2012 21:29:22 +0000

Toyota IFS Steering Box 1986-95 years. Factory box, inspected for wear, cracks, leaks, twisted splines, cleaned. Pitman arm is included though condition is not covered. Box has 90 day warantee from purchase date against leaks. Ask a sales rep about Rebuilt/ ported boxs. Please call if a specific year of box is required!

Price:$135.00

Sky Manufacturing Toyota IFS Pitman Arm

Mon, 06 Feb 2012 21:29:22 +0000

Available in a 3/4" less than stock drop and flat versions. Tapered for either a Toyota FJ-80 TRE. or Chevy 1 Ton ends. Allows for fine tuning of steering with no core charge and no risk of breaking a modified pitman stock pitman arm.

Price:$110.00

Chilkat Designs 3RZ/ 2RZ Exhaust Header Flange with Gasket

Mon, 06 Feb 2012 21:29:22 +0000

- Build your own Header or Turbo Manifold - Laser cut from 3/8" MS plate - Fel-Pro Gasket included

Price:$59.00

Chilkat Designs Heavy Duty Motor Conversion Mounts (3rz & 2rz)- '79-'95 Toyota Truck/ 4Runner

Mon, 06 Feb 2012 21:29:22 +0000

- Works with 1995.5 - 2004 Tacoma 3rz (2.7 liter) and 2rz (2.4 liter) motors - Replaces the factory block mounts - No modifications to factory frame mounts required - Uses factory rubber motor mounts - Includes Passenger and Driver Side Brackets

Price:$139.00

Chilkat Designs Motor Mount Shims

Mon, 06 Feb 2012 21:29:22 +0000

- 1/8" laser cut - Fit between the frame and stock rubber mounts to shim your Toyota 4 cylinder or 3.0 V6 engine

Price:$4.00

Chilkat Designs Power Steering Pump Bracket

Mon, 06 Feb 2012 21:29:22 +0000

- Cut from 1/4" MS P&O (pickled and oiled) plate - Laser cut, TIG welded - 5/16" chain stay built in for ease of motor hoisting without removing the pump - Maintains Toyota factory PS belt - TC pumps can be modified to flow at 4.5 gallons per minute - Works with full hydro, hydro assist, or even the daily driver

Price:$49.00

N-FAB Wheel-to-Wheel Nerf Steps- Dodge

Mon, 06 Feb 2012 21:29:22 +0000

- Main bar extends from tire to tire - All bolt on design that wont flex - Bar is positioned high and tight for a better fit & cleaner look - Main bar protects truck from road debris - Solid one-piece construction - N-FAB patented drop-step design - Main bar protects vehicle from road debris - Protects the DEF(Diesel Emissions Fluid) Tank from harmful side impacts (Diesel Models) - Lifetime Warranty on product, and 5 Year Warranty on finish - Comes in gloss black powder coat finish - Made in the USA!

Price:$399.95

Sky Manufacturing Toyota High Steer Kit

Mon, 06 Feb 2012 21:29:22 +0000

Kit includes Stage 6 billet steering arms, tie rod, drag link, FJ-80 ends, jam nuts, and pitman arm adapter. All USA made steel links and Chromoly steering arms. Sky Manufacturing steering arms have properly machined conical tapers. This allows them to hold tourqe over other arms. Sky Manufacturing also has shortened the tie rod/ drag link to king pin distance, increasing turning radius, eliminating tie rod to drag link interferance, and allowing springs with more arch.

Price:$394.00

aFe Mach Force XP DPF-Delete Exhaust System w/ Muffler- '07.5-'11 Dodge Ram Cummins L6-6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Constructed out of durable 5" mandrel bent 409 stainless steel - Uses bayonet style hangers and band clamps for a clean installation - Comes complete with all tubing, bayonet hangers, band clamps, thermocouple and pressure tap bungs - Option of polished stainless steel or black powder-coat finish - System requires the use of a controller with a DPF-delete function *NOTE: This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$838.95

aFe Mach Force XP DPF-Delete Exhaust System w/out Muffler- '07.5-'11 Dodge Ram Cummins L6-6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Constructed out of durable 5" mandrel bent 409 stainless steel - Uses bayonet style hangers and band clamps for a clean installation - Comes complete with all tubing, bayonet hangers, band clamps, thermocouple and pressure tap bungs - System requires the use of a controller with a DPF-delete function *NOTE: This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$712.95

N-FAB Wheel-to-Wheel Nerf Steps- '88-'99 Chevy/GMC

Mon, 06 Feb 2012 21:29:22 +0000

Product Description - Main bar extends from tire to tire - All bolt on design that wont flex - Bar is positioned high and tight for a better fit & cleaner look - Main bar protects truck from road debris - Solid one-piece construction - N-FAB patented drop-step design - Main bar protects vehicle from road debris - Protects the DEF(Diesel Emissions Fluid) Tank from harmful side impacts (Diesel Models) - Lifetime Warranty on product, and 5 Year Warranty on finish - Comes in gloss black powder coat finish - Made in the USA!

Price:$399.95

AEV Diesel Particulate Filter Tube- '11 Jeep Wrangler (Diesel)

Mon, 06 Feb 2012 21:29:22 +0000

- Required when installing AEV 3.5" and 4.5" DualSport Suspensions on all 2011+ JK Wranglers equipped with the VM 2.8 CRD engine with the diesel particulate filter (DPF) - LHD, RHD, 2 Door and 4 Door

Price:$44.95

aFe Magnum Force Stage 2 Air Intake System- '10-'11 Ford F-150 SVT Raptor and '11 Ford F-150*

Mon, 06 Feb 2012 21:29:22 +0000

- Adds horsepower - Produces 22lbs. x ft. of torque - Outflows the factory intake by 47% - Enclosed in a durable 16 gauge, powder-coated heat shield - Features a washable/reusable conical air filter that improves airflow for increased horsepower and torque - Features a wrinkle black tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance - One-piece heat shield requires little or no assembly - Filter is constructed with 100% polyurethane for long life and multiple cleaning cycles - System mounts to the factory lower intake housing - Value package includes the Stage 2 Pro Guard 7 intake, air filter restore kit, pre-filter and an additional Pro Dry S air filter *NOTE: Fits Ford F150 Lariat, Lariat Limited, Platinum & Harley-Davidson

Price:$0.00

aFe Intake Filters (Pro DRY S)- Ford

Mon, 06 Feb 2012 21:29:22 +0000

- Five layers of progressively finer mesh cotton gauze media between 100% polyurethane top and base - Washable and reusable for multiple cleanings - Tall, open, evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings - Pliable polyurethane flange with integrated bumps insures tight, no-leak seal over the life of the filter

Price:$0.00

aFe Intake Filters (Pro GUARD 7)- Ford

Mon, 06 Feb 2012 21:29:22 +0000

Price:$0.00

aFe Intake Filters (Pro 5R)- Ford

Mon, 06 Feb 2012 21:29:22 +0000

Price:$0.00

Takeda Cold Air Intake System- '08-'11 Infiniti G37 Coupe V6-3.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Adds 19 horsepower - Produces 12 lbs. x ft. torque - Placement of the unique single air filter in the area in front of the radiator guarantees a supply of cool, high pressure fresh air for maximum power gain - Takeda philosophy of "no cutting or drilling" is maintained with this intake system, as flexible urethane couplings are used to pass through existing openings in the radiator core support - Polished aluminum tubes are maintenance-free thanks to the clear anodized finish Click here for installation instructions

Price:$450.95

MBRP Performance Series Aluminized Turbo Back- Single Exhaust- '04.5-'07 Dodge 2500/3500

Mon, 06 Feb 2012 21:29:22 +0000

- Designed for maximum power and performance - Mandrel bent tubing - Installs with common hand tools - Can improve fuel economy by 1-2 mpg - Boosts torque and horsepower

Price:$309.95

aFe Stage 2 Si Air Intake System- '08-'10 Ford SuperDuty V8-6.4L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- Fully sealed in a durable commercial grade designed rotomolded airbox - Features a washable/reusable, high filtration conical air filter providing maximum filtration with increased air flow - Features a heat-insulating molded plastic intake tube and unique turbo adapter that funnels air into the turbo for improved volumetric efficiency for maximum performance - Utilizes factory mounting points for easy assembly and installation - This intake is 50-state legal (CARB E.O Number D-550-4) Click here for installation instructions

Price:$0.00

Takeda Cold Air Intake System- '08-'11Lexus IS-F V8-5.0L

Mon, 06 Feb 2012 21:29:22 +0000

- Adds 16 horsepower - Produces 15 lbs. x ft. of torque - Outflows the factory intake by 20% - Constructed out of lightweight clear coat anodized tubing for maximum air flow and stealthy appearance - Uses a large 360 degree high flow PRO Dry S air filter - Welded-on Mass Air Flow Sensor pad with inserts makes for clean installation Click here for installation instructions - Includes black powder-coated housing that utilizes a portion of the stock air box to make a totally sealed housing that keeps out-power-robbing engine heat - PRO Dry S air filter requires no oils and cleans with simple soap and water for easy maintenance and maximum convenience - Comes complete with all tubing, filters, couplers and hardware - This intake won a Global Media Award at the 2010 SEMA Show

Price:$397.95

Takeda ProDryS Restore Kit

Mon, 06 Feb 2012 21:29:22 +0000

ProDryS dry media filter maintenance kit

Price:$18.95

aFe Restore Kit - Pro Dry S filter

Mon, 06 Feb 2012 21:29:22 +0000

- Spray on and wash off - Follow the instructions and you will have a lifetime of horsepower Click here for instructions

Price:$10.95

aFe Magnum Shield Pre-Filters

Mon, 06 Feb 2012 21:29:22 +0000

- Does not restrict air flow - Made of a dry weave fabric that does not attract dirt - Cleans with soap and water

Price:$33.95

aFe Mach Force CAT Back System- '11 BMW 335i L6-3.0L (t) N55 E90

Mon, 06 Feb 2012 21:29:22 +0000

- Constructed from 2.75" mandrel bent - High polished 304 stainless steel for corrosion resistance and an aggressive look - Comes with dual high flow resonators and dual 3.5" polished 304 stainless steel tips and mufflers - Mellow, yet powerful sound - Please note this exhaust only fits the E90

Price:$1,569.95

Takeda Cold Air Intake System- '11 Scion tC L4-2.5L

Mon, 06 Feb 2012 21:29:22 +0000

- Adds 11horsepower - Produces 11lbs. x ft. of torque - Outflowed the factory intake by 67% - Constructed out of lightweight clear-coat anodized tubing for maximum air flow and great style - Uses a large 360 degree high flow PRO Dry S air filter for maximum flow, filtration and convenience - PRO Dry S air filter requires no oils and cleans with simple soap and water - Comes complete with all tubing, filters, couplers and hardware for easy installation http://afepower.com/catalog/TA-2012P/is.pdf

Price:$282.95

N-FAB Wheel-to-Wheel Nerf Steps- '01-'11 Chevy/GMC

Mon, 06 Feb 2012 21:29:22 +0000

Price:$399.95

Takeda Cold Air Intake- '08-'11 Subaru Impreza WRX STi H4-2.5L

Mon, 06 Feb 2012 21:29:22 +0000

- Constructed out of lightweight clear-coat anodized tubing for maximum air flow and a great style - Uses a large 360 degree high flow PRO Dry S air filter for maximum flow, filtration and convenience - PRO Dry S air filter requires no oils and cleans with simple soap and water - Comes complete with all tubing, filters, couplers and hardware for an easy installation - Polished finish

Price:$249.00

aFe Mach Force XP Race Pipe- 07.5-10 GM Silverado HD/Sierra HD V8-6.6L

Mon, 06 Feb 2012 21:29:22 +0000

The aFe Mach Force XP DPF-Delete Race Pipe upgrade kit is constructed of mandrel bent 409 stainless steel with OE style hangers and clamps. All hardware and components are included for a no-trouble installation. This exhaust fits the Extended Cab Long Bed Duramax LMM models only. Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.

Price:$208.95

ARB 31 Spline Air Locker- Nissan C200K

Mon, 06 Feb 2012 21:29:22 +0000

- 31 spline axle - 1.26" (32mm) axle shaft diameter (outside of splines) - 10 bolt ring gear - 5.04" (128mm) dia. ring gear ID - Works for 05-11 Nissan Xterra/ Frontier Rear (w/C200K axle) - Available in late June 2011 (currently taking pre-orders)

Price:$1,216.99

aFe Cold Air Intake System Stage 2- '11 Ford F-250/ F-350 SD V8-6.2L

Mon, 06 Feb 2012 21:29:22 +0000

This Stage 2 cold air intake system produced 18hp, 22lbs. x ft. torque and outflows the factory intake by 47%. This intake includes a massive 360 degree Pro 5R air filter and utilizes the existing lower air box for easy installation, with a one-piece, snap in heat shield. This intake system also features a clear coat anodized polished intake tube that replaces the stock intake tract and directs increased airflow with improved volumetric efficiency for maximum performance. This system comes with all hardware, tubes and couplers for an easy installation. Available in black or polished finishes. Polished filters will ship immediately, while black filters will ship in June 2011.

Price:$354.99

Dynomax Cat Back Exhaust Kit- '10 Ford Mustang

Mon, 06 Feb 2012 21:29:22 +0000

- 3-in. Mandrel bent stainless steel tubing - Ultra Flo™ Race Bullet Muffler - Stainless steel Accuseal™ clamps - Double wall stainless steel 4-in. tips - Limited Lifetime Warranty - 90-Day Performance & Sound Guarantee *Get $75 Cash Back on Select Cat Back Exhaust Kits! "Sound Off" Mail-in Rebate March 1st- August 31st, 2011 See dynomax.com for details

Price:$569.99

aFe Throttle Body Spacers- '04-'09 BMW 550i V8 4.8L E60

Mon, 06 Feb 2012 21:29:22 +0000

This Silver Bullet throttle body spacer produced 10hp and 14lbs. x ft. of torque by creating turbulence in the air flow at the point just prior entry into the engine. This is a great bang for the buck add-on product. Click here for installation instructions

Price:$157.44

aFe Throttle Body Spacers- BMW '00-'05 X5, '97-'08 5-Series, '04-'08 V8 6-Series

Mon, 06 Feb 2012 21:29:22 +0000

Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).

Price:$157.99

VP Racing 5 Gallon Motorsport Jugs

Mon, 06 Feb 2012 21:29:22 +0000

NOTE: The VP Motorsport Container is intended only for use as a rapid refueling device for racing vehicles used in professional off road and closed course competition racing events. It is NOT a portable fuel container as described by ASTM, EPA, ARB or other state or federal agencies. Intended for racing fuel only; not to be used for street legal fuels.

Price:$27.99

VP Racing Deluxe Filler Hose

Mon, 06 Feb 2012 21:29:22 +0000

- 5 Gallon - High Density Polyethylene - Ergonomically Contoured Handle

Price:$10.99

ANZO USA 6 Function LED Tailgate Bar

Mon, 06 Feb 2012 21:29:22 +0000

- Faster lighting response - Brighter, longer lasting lighting - Thermo-Hygrometer (temperature and humidity chamber) and Rain-Resistant tested - Added safety - Plug-n-Play installation - Universal fit - SAE and D.O.T. compliant with FMVSS (Federal Motor Vehicle Safety Standards) No. 108.

Price:$79.95

Bushwacker 2011 Ford SuperDuty 2500/3500 Fender Flares- Pocket Style

Mon, 06 Feb 2012 21:29:22 +0000

- Size 2" - No drilling or cutting- installs using the existing factory holes - 100% UV Protection, no chalking, no cracking, no warping - Comes complete with decorative stainless steel hardware for a "bolt-on" look - OEM matte black finish can be custom painted - Includes Limited Lifetime Warranty - Set of four flares

Price:$515.99

Bushwacker 2011 Ford S.D. 2500/3500 Fender Flares- "Extend-a-Fender"

Mon, 06 Feb 2012 21:29:22 +0000

- Size 1.75" - Great for larger wheel and tire packages - Provides that "Limited Edition" look - Provides extra protection from road debris - Will not work on dually models

Price:$468.99

Smittybilt D-Rings (various sizes)

Mon, 06 Feb 2012 21:29:22 +0000

* Designed for high quality towing * Made from strong material * Plated with zinc coating * Corrosion resistant * Ensures easy installation

Price:$7.99

PIAA Wiring Harness for H.I.D. Lighting Technology

Mon, 06 Feb 2012 21:29:22 +0000

Holds two PIAA Shock Lights.

Price:$55.00

PIAA HID Single Shock Lamp

Mon, 06 Feb 2012 21:29:22 +0000

RS400HID Lamp Kit includes integrated ballast and igniter. H3 35w HID Driving Lamp. Single unit. Designed specifically for race applications, the PIAA SHOCK LAMP lamp is not sold as a complete kit. Not recommended for highway use. Wiring harness sold separately.

Price:$335.00

K&N Recharger Filter Care Service Kit

Mon, 06 Feb 2012 21:29:22 +0000

- Includes air filter oil, filter cleaner and service decal - Weight of the recharger kit is 2 lb (0.9 kg.) - Air filter oil prevents dirt from entering your engine - Air filter cleaner works to dissolve the dirt build up and old filter oil - Oil is available in aerosol or squeeze bottles

Price:$9.99

aFe Air Filter Cleaning Kit

Mon, 06 Feb 2012 21:29:22 +0000

The aFe filter restore kit comes with a squeeze bottle of aFe blue filter oil and a spray bottle of aFe filter cleaner. Recommended re-oiling every 20-30k miles. Please do not over oil the filter, please see instructions below. Click here for instructions

Price:$9.99

Smittybilt 2" x 30" Tow Straps

Mon, 06 Feb 2012 21:29:22 +0000

- Engineered to high standards - Assured high quality and dependability - Tested under extreme conditions - 20,000 lb Capacity

Price:$25.99

Smittybilt Reciever Hitch D-Ring

Mon, 06 Feb 2012 21:29:22 +0000

- Designed for high quality towing - Made from strong material - Plated with zinc coating - Corrosion resistant - Ensures easy installation

Price:$30.00

aFe Differential Covers

Mon, 06 Feb 2012 21:29:22 +0000

This differential cover has a 5 quart lube capacity (factory cover holds 4 quarts) at the factory line, a magnetic drain plug, a magnetic tipped fill plug for maximum rear-end protection. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. aFe has also designed a large oil level site glass with calibration plug set to the factory fluid level to eliminate overfilling. This differential cover is constructed out of durable die-cast A380-T6 aluminum with reinforced ribs and a wrinkle black powder coating for maximum strength and styling. This cover fits the AA-14-11.5 axles. This cover uses an O-ring mounted in the machined channel for a leak-free seal.

Price:$274.00

aFe 4” DPF-Delete System

Mon, 06 Feb 2012 21:29:22 +0000

This system comes complete with all tubing, bayonet hangers and band clamps. You will be shocked at the performance and mileage improvement you will see from this system. This system requires the use of a controller with a DPF-delete function. This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$628.99

READYLIFT Universal Torsion Key Unloading Tool

Mon, 06 Feb 2012 21:29:22 +0000

- Made from forged hardened steel - Makes removing and installing torsion keys safe and easier - ONLY tool that will work with new 2011 GM 2500/3500HD trucks - Can be used with other makes and models of trucks with torsion keys - Kit comes with a crossmember adapter tool which helps position the tool on some models with difficult torsion key crossmembers - Okay for use with air tools

Price:$99.99

'11 GM 1500HD/2500HD READYLIFT 2.5" Lift Kit

Mon, 06 Feb 2012 21:29:22 +0000

The NEW 66-3011 Leveling Kit includes two new Forged Torsion Keys, four front shock extensions which allows you to retain the use of the stock shocks, and four new shock mounting nuts for a precise and professional installation. Each key and shock spacer is protected with a durable e-coated finish to prevent rusting commonly found on other keys. Allows for the installation of larger aftermarket plus-size tires and wheels. READYLIFT offers a Lifetime Warranty on all of its products. From light-duty to heavy-duty Trucks or SUV’s, READYLIFT is the SMART way to lift and your truck.

Price:$239.95

aFe Fluid Filters Oil Filters- Dodge Trucks '91-'07 L6-5.9L /'07.5-'11 L6-6.7L

Mon, 06 Feb 2012 21:29:22 +0000

A heavy duty 600lb. burst strength canister with a 3/8" nut/ratchet drive is built in to the filter for easy removal. The inside of the filter uses a NF21 synthetic composite material which provide maximum engine protection with minimal flow restriction. Heavy duty coil spring, wire backed media, center tube and .100 thick base plate provides maximum strength. The Pro-Guard D2 Oil Filter outflows and has a high filter efficiency than all other oil filters on the market today.

Price:$18.99

Rancho RS5000 series Steering Stabilizer

Mon, 06 Feb 2012 21:29:22 +0000

* Increased vehicle control with reduced shimmy helping with driver fatigue * Designed for use with over-sized wheels and tires for a custom look * 240-hour salt spray resistant finish to stay looking good, even in harsh conditions * Features a twin-tube, cellular gas design for a smooth ride both on the highway and off-road * Limited lifetime warranty

Fits: '68-'72 Chevrolet C10/C20 Pickup, C10/C20/ K10/K20 Suburban, C30/K10/K20/K30 Pickup '71-'74 Dodge B100/B200/B300 Van '75-'80 Dodge B100/B200 /B300/D300/W200/W300 '81-'90 Dodge B150/B250/B350 '75-'89 Dodge D100/W100 '68-'74 Dodge D100/D200/D300/W200/W100/W300 Pickup '77-'93 Dodge D150/D250/W150 '81-'93 Dodge D350/W250/W350 '78-'980 Dodge RD200 '94-'98 Dodge Ram 2500/3500 '74-'93 Dodge Ramcharger '70-'79 Ford Bronco '75-'79 Ford F-100, F-150, F-250, F-350 '68-'74 Ford F-100 Pickup '60-'74 Ford F-250 Pickup '62-'74 Ford F-350 Pickup '61-'65 GMC 1000 Series '68-'72 GMC C15/ C1500/ C25/ C2500/ C35/ C3500 Pickup, C15/ C1500/ C25/ C2500/ K15/K1500/ K25/K2500/ K35/K3500 Suburban '66-'72 GMC K15/K1500 Pickup '67-'72 GMC K25/K2500 Pickup '74 International 100 '68 International 1000C, 1100C, 1200C '69-'70 International 1000, D1100D, 1200D 71-'73 International 1010/1110/1210 '70 International 1300D 72-'73 International 1310 '75 International 150 '74-'75 International 200 '68 International 908C '69-'71 International M800, Scout '69 International M800 Navy '69-'72 International M800 Post Office '71-'80 International Scout II '75 International Travela ll '63-'67 Jeep Gladiator '68-'71 Jeep J-100 '68-'73 Jeep J-2500, J-2600, J-3600 '68-'70 Jeep J-2700, J-3500, J-3700, J-3800 '68 Jeep J-2800 '61-'62 Jeep Utility '75-'80 Plymouth PB100, PB200, PB300 '74 Plymouth PB100/PB200/PB300 Van '81-'83 Plymouth PB150, PB250, PB350 '74-'78 Plymouth Trailduster '84-'85 Toyota 4Runner '84-94 Toyota Pickup

Price:$64.99

Rancho RS5000 Shock Package Dodge 2003-2011

Mon, 06 Feb 2012 21:29:22 +0000

Fits in the front of '06-'08 Dodge Ram mega cab 1500 '03-'11 Dodge Ram 2500 '03-'11 Dodge Ram 3500

Price:$195.96

Rancho RS5000 Series Shocks- 5056

Mon, 06 Feb 2012 21:29:22 +0000

Fits in the rear of

'02-'06 Chevrolet Avalanche 2500, '01-'07 Chevrolet Silverado 1500 HD, '99-'04 Chevrolet Silverado 2500, '01-'08 Chevrolet Silverado 2500 HD, '00-'07 Chevrolet Suburban 2500, '02-'05 Dodge Ram 1500, '03-'07 Dodge Ram 2500, '03-'07 Dodge Ram 3500, '04-'04 GMC Sierra 1500, '01-2007 GMC Sierra 1500 HD, '99-'04 GMC Sierra 2500, '01-'08 GMC Sierra 2500 HD, '00-'07 GMC Yukon XL 2500, '03-'07 Hummer H2

Price:$61.99

Rancho RS9000 Series Adjustable Shocks- 9317

Mon, 06 Feb 2012 21:29:22 +0000

Fits in the front of '06-'08 Dodge Ram 1500 '03-'09 Dodge Ram 2500 '03-'09 Dodge Ram 3500

Price:$117.99

Rancho RS9000 Series Adjustable Shocks- 9056

Mon, 06 Feb 2012 21:29:22 +0000

Fits in the rear of '03-'06 Chevrolet Avalanche 1500 '02-'06 Chevrolet Avalanche 2500 '05-'06 Chevrolet Aveo '03-'05 Chevrolet Blazer '03-'06 Chevrolet C4500 Kodiak '03-'06 Chevrolet C5500 Kodiak '03-'06 Chevrolet C6500 Kodiak '03-'06 Chevrolet C7500 Kodiak '03-'05 Chevrolet Cavalier '05-'05 Chevrolet Classic '05-'06 Chevrolet Cobalt '05-'06 Chevrolet Colorado '03-'06 Chevrolet Corvette '05-'06 Chevrolet Epica '05-'06 Chevrolet Equinox '03-'06 Chevrolet Express 1500 '03-'06 Chevrolet Express 2500 '03-'06 Chevrolet Express 3500 '06-'06 Chevrolet HHR '03-'06 Chevrolet Impala '03-'06 Chevrolet Malibu '03-'06 Chevrolet Monte Carlo '05-'06 Chevrolet Optra '03-'03 Chevrolet S10 '03-'06 Chevrolet SSR '01-'06 Chevrolet Silverado 1500 '01-'07 Chevrolet Silverado 1500 HD '99-'04 Chevrolet Silverado 2500 '01-'08 Chevrolet Silverado 2500 HD '03-'06 Chevrolet Silverado 3500 '03-'06 Chevrolet Suburban 1500 '00-'08 Chevrolet Suburban 2500 '05-'06 Chevrolet T6500 '05-'06 Chevrolet T7500 '03-'06 Chevrolet Tahoe '03-'03 Chevrolet Tracker '03-'06 Chevrolet Trailblazer '05-'06 Chevrolet Uplander '03-'05 Chevrolet Venture '03-'06 Chevrolet W3500 Tiltmaster '03-'06 Chevrolet W4500 Tiltmaster '03-'06 Chevrolet W5500 Tiltmaster '05-'06 Chevrolet W5500HD Tiltmaster '02-'08 Dodge Ram 1500 '03-'09 Dodge Ram 2500 '03-'09 Dodge Ram 3500 '99-'00 GMC K2500 '01-'07 GMC Sierra 1500 '01-'07 GMC Sierra 1500 HD '99-'04 GMC Sierra 2500 '01-'08 GMC Sierra 2500 HD '01-'01 GMC Sierra C3 '02-'07 GMC Sierra Denali '00-'08 GMC Yukon XL 2500 '03-'07 Hummer H2

Price:$117.99

Rancho RS5000 Series Shocks- 5198

Mon, 06 Feb 2012 21:29:22 +0000

Fits the rear of '03-'05 Chevrolet Blazer, Cavalier, Astro, Venture '04-'05 Chevrolet Classic '05-'06 Chevrolet Cobalt, Equinox, Uplander '04-'06 Chevrolet Colorado, Epica, Aveo, Optra, Chevrolet T6500/T7500 '03-'06 Chevrolet Corvette, Impala, Malibu, Monte Carlo,Express 1500/2500/3500, Avalanche 1500/2500, Kodiak C4500/5500/6500/7500, SSR, Trailblazer, Tiltmaster W3500/ W4500/ W5500 '06 Chevrolet HHR '03-'04 Chevrolet S10 '99-'09 Chevrolet Silverado 1500 '01-'07 Chevrolet Silverado 1500 HD, 3500 '03-'04 Chevrolet Silverado 2500, Tracker '03-'09 Chevrolet Silverado 2500 HD '08-'09 Chevrolet Silverado 3500 HD '00-'06 Chevrolet Suburban 1500/2500, Tahoe '04-'06 Chevrolet W5500HD Tiltmaster '94-'01 Dodge Ram 1500/2500/3500 '99-'01 Dodge Ram 1500 Van '99-'09 GMC Sierra 1500 '01-'07 GMC Sierra 1500 HD, 3500 '07-'09 GMC Sierra 2500 HD, 3500 HD '01 GMC Sierra C3 '02-'08 GMC Sierra Denali '00 GMC Yukon Denali '00-'01 GMC Yukon XL 2500

Price:$61.99

SCT Economizer Fuel Saving Handheld Programmer

Mon, 06 Feb 2012 21:29:22 +0000

With rising fuel costs and the effects of global warming making headline news, we all have to do our part to conserve energy and reduce our demands on the environment. SCT, the leader in automotive custom tuning solutions is ready to help you do your part while saving you money with the NEW SCT Ford Economizer Fuel Saving Handheld vehicle Programmer!

Fits '99-'07 Ford 7.3L and 6.0L Powerstroke

Price:$399.99

GM Duramax '11 Race Pipes- V8-6.6L

Mon, 06 Feb 2012 21:29:22 +0000

This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$249.99

Ford 6.4L '08-'10 Bully Dog PMT Custom Mount

Mon, 06 Feb 2012 21:29:22 +0000

* PMT mount * Fits on the driver's side dash between the A-pillar and the steering wheel * Mount comes in black but can be painted to match any vehicle interior color * Bully Dog offers a variety of configurations for just about any application our Gauge Pods mount on the A Pillar giving a convenient, easy-to-read place for gauges * Bully Dog also has pillar pods for the outlook in-cab monitor and the new performance management tool

Price:$65.99

Custom A-pillar mount- GM Pickups and SUVs '07.5-'10

Mon, 06 Feb 2012 21:29:22 +0000

* Custom A-Pillar mount * Paintable * Does not have a speaker

Price:$65.99

Custom A-pillar mount (Speaker)- GM Pickups and SUVs '07.5-'10

Mon, 06 Feb 2012 21:29:22 +0000

* Custom A-Pillar mount * Paintable * Includes a speaker

Price:$65.99

2007-2011 BMW 1-Series and 3-Series AFE Race Pipes- L6-3.0L

Mon, 06 Feb 2012 21:29:22 +0000

These high performance race pipes are constructed out of lightweight, TIG-welded 2-3/4" brushed finish 304 stainless steel and use thick 3/8" 304 stainless steel flanges for a leak-free seal and a factory fit. In recent dyno testing, these race pipes produced 28hp and 28lbs. x ft. torque over the factory down tubes.

Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use, could be in violation of local, state and federal laws.

Price:$749.99

Dodge 2500/3500 Mega/Crew Cab 06-11 Firestone "Ride Rite" Rear Air Helper Spring Kit

Mon, 06 Feb 2012 21:29:22 +0000

•"NO DRILLING" custom fit installation •Kit includes (2) air bag helper springs and all required hardware •Air Bags will increase "level load" capacity by 5000lbs* •Keeps the your Ram Mega Cab level •Levels off-center loads (side to side adjustment) •Reduce suspension fatigue, keeps leaf springs caused by permanently sagging •Increase vehicle stability •Air adjustment improves the ride •Limited Lifetime Warranty

Price:$295.00

Dodge Ram 2500 / 3500 94-02 Firestone "Ride-Rite" Rear Air Bag Helper Springs

Mon, 06 Feb 2012 21:29:22 +0000

•Custom fit installation •Kit includes (2) air bag helper springs and all required hardware •Air Bags will increase "level load" capacity by 5000lbs* •Keeps the your Ram level •Levels off-center loads (side to side adjustment) •Reduce suspension fatigue, keeps leaf springs caused by permanently sagging •Increase vehicle stability •Air adjustment improves the ride •Limited Lifetime Warranty

Price:$295.00

Dodge Ram 1500 02-08 Firestone "Ride-Rite" Rear Air Bag Helper Springs

Mon, 06 Feb 2012 21:29:22 +0000

•"NO DRILLING" custom fit installation •Kit includes (2) air bag helper springs and all required hardware •Air Bags will increase "level load" capacity by 5000lbs* •Keeps the your Ram level •Levels off-center loads (side to side adjustment) •Reduce suspension fatigue, keeps leaf springs caused by permanently sagging •Increase vehicle stability •Air adjustment improves the ride •Limited Lifetime Warranty

Price:$295.00

Firestone "Standard Duty" Air-Rite air system compressor (w/SINGLE gauge control)

Mon, 06 Feb 2012 21:29:22 +0000

•Standard Duty compressor •Single guage control •Instant adjustability of your air helper springs •Provides equal inflation of both air springs •Continuous monitoring of the air helper springs •Ideal for occasional usage •Includes compressor, gauge, hose & hardware

Price:$230.00

Firestone "Standard Duty" Air-Rite air system compressor (w/ DUAL gauge control)

Mon, 06 Feb 2012 21:29:22 +0000

•Standard Duty compressor •Dual guage control •Instant adjustability of your air helper springs •Provides equal inflation of both air springs •Continuous monitoring of the air helper springs •Ideal for occasional usage •Includes compressor, gauge, hose & hardware

Price:$330.00

Dodge Truck 1/2, 3/4 & 1 ton 69-93 Firestone Rear "Ride-Rite" Air Bag Helper Springs

Mon, 06 Feb 2012 21:29:22 +0000

•Custom fit installation •Kit includes (2) air bag helper springs and all required hardware •Air Bags will increase "level load" capacity by 5000lbs* •Keeps the your truck level •Levels off-center loads (side to side adjustment) •Reduce suspension fatigue, keeps leaf springs caused by permanently sagging •Increase vehicle stability •Air adjustment improves the ride •Limited Lifetime Warranty

Price:$295.00

Chevy 1500 Truck 88-98 "Ride Control" Rear Air Helper Spring Kit- 2WD/4WD

Mon, 06 Feb 2012 21:29:22 +0000

- Custom fit installation for the Chevy truck - Air Springs adjustable for a great ride, loaded or unloaded - Eliminate suspension sag, sway & bottoming out - Will increase the level load capacity 2000 lbs - Made with rugged, durable components - Limited Lifetime Warranty - Quick & Easy Installation with common hand tools - Air pressure adjustable from 5 to 100 PSI

Price:$215.00

"Load Controller II" Air Compressor Kit by Air Lift (Single Gauge)

Mon, 06 Feb 2012 21:29:22 +0000

* 2 year limited warranty * Convenient air control from the comfort of inside your vehicle * Specifically designed to control air helper springs * Automatically maintains safe pressures * Kit includes compressor, wiring kit and gauge (everything you need)

Price:$170.00

"Load Controller II" Air Compressor Kit by Air Lift (Dual Gauge)

Mon, 06 Feb 2012 21:29:22 +0000

Price:$261.00

Chevy 1/2, 3/4, and 1 Ton Truck 73-87 "Load Lifter 5000" Rear Air Helper Spring Kit- 4WD

Mon, 06 Feb 2012 21:29:22 +0000

* Custom fit installation for the Chevy truck * Air Springs adjustable for a great ride, loaded or unloaded * Eliminate suspension sag, sway & bottoming out * Will increase the level load capacity up to 5000 lbs * Made with rugged, durable components * Limited Lifetime Warranty * 60 Day Ride Satisfaction Guarantee * Quick & Easy Installation with common hand tools * Air pressure adjustable from 5 to 100 PSI

Price:$290.00

Chevy Silverado 2500HD / 3500HD 01-10 "Air Cell" Rear Load Support Kit- 2WD/4WD

Mon, 06 Feb 2012 21:29:22 +0000

* "NO DRILLING" * custom fit installation for the Chevy Silverado * Easy to install brackets, no air lines or fittings * Great for vehicles take are alway loaded * Made of rugged, long-lasting closed-cell urethane * Just install it and forget it. No inflation required * Urethane foam traps air to provide a cushion against sag * Limited Lifetime Warranty * 60 Day Ride Satisfaction Guarantee

Price:$180.00

Dodge Ram 1500 09-11 Airlift 1000 Series Rear Air Spring Kit

Mon, 06 Feb 2012 21:29:22 +0000

* Fully adjustable rear air springs level your vehicle when towing or hauling a heavy load for a safe comfortable ride * Easily installs inside your vehicle's standard rear coil springs to eliminate sag and bottoming out * Rugged durable materials used ensure that air springs and all hardware will last indefinitely under proper conditions * Inflatable up to absolute max of 50-psi, with a minimum of 5-psi and provides up to 1,000 pounds of leveling capacity * Both air springs can be inflated to the same pressure via a single air line, or can be inflated to differing pressure when needed via a dual air line configuration *Lifetime Limited Warranty to the original retail purchaser

Price:$90.00

Dodge Ram 2500/3500 94-02 Airlift 1000 Series Front Air Spring Kit

Mon, 06 Feb 2012 21:29:22 +0000

* "NO DRILLING" image installation * Designed for leveling the Front end of your vehicle * Air Springs adjustable for a great ride, loaded or unloaded * Eliminate suspension sag, sway & bottoming out * Will increase the level load capacity 1,000 lbs * Limited Lifetime Warranty * Quick & Easy Installation with common hand tools

Price:$90.00

Ford F250/350 80-04 Airlift 1000 Series Front Air Spring Kit- 2WD

Mon, 06 Feb 2012 21:29:22 +0000

Price:$90.00

Ford F250/350 05-10 Airlift 1000 Series Front Air Spring Kit

Mon, 06 Feb 2012 21:29:22 +0000

Price:$90.00

Dodge Ram 1500 94-01 Airlift 1000 Series Front Air Spring Kit

Mon, 06 Feb 2012 21:29:22 +0000

Price:$90.00

Diamond Eye Exhaust '94-'02 DODGE 4" ALUM - TURBO BACK SINGLE

Mon, 06 Feb 2012 21:29:22 +0000

K4212A - 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 & 2002 - DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS) - 4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST KIT - TURBO BACK SINGLE

Price:$466.00 Special Price:$260.67

Pro Comp 6 Inch Crossmember & Knuckle Lift Kit with ES9000 Shocks

Mon, 06 Feb 2012 21:29:22 +0000

Pro Comp's 6 Inch, Crossmember / Knuckle Lift system for the Chevy-GMC 2500 HD clears 35 inch tires with no trimming and features a heavy-duty, laser cut, 1/4" thick crossmember & steering knuckles to achieve front lift. This is a complete bolt-on system that requires no welding or drilling, and no cutting of the differential making installation quick and easy. Pro Comp is driven by genuine off road enthusiasts and Pro Comp Suspension Products reflect customer-driven, racing influenced technology and engineering with a focus on world-class manufacturing processes and techniques. When it comes to your vehicle's handling, look and performance, we know you dont make compromises and either do we. From the middle of downtown to the middle of nowhere Pro Comp will get you there and back.

Price:$1,754.99 Special Price:$1,670.68

Fabtech 6" RTS™ System w/ Performance Shocks - 2011 GM K2500HD 4WD

Mon, 06 Feb 2012 21:29:22 +0000

Fabtech’s cutting edge RTS™ system has now been developed for the all new 2011 GM HD platform. The 6” RTS™ utilizes a patent pending bracket system that keep the torsion bars raised up, in the stock location. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. The 6” RTS™ system has been designed with unitized bracketry to retain the four front compression stops of the vehicle as GM intended. This distributes impact loads across a wide section of the frame rather than at a single point. High arched crossmembers and front differential skid plate are constructed of 1/4” thick steel to resist bending from hard front suspension impacts. Only 1/4” thick steel provides the rigidity and strength necessary to relocate the torsion bars, bump stops and lower control arms properly. Minimal heavy duty bracketry allow for a fast installation time with only two holes to drill and no cutting of the front diff housing. The 6” RTS™ system allows the use of both 18” and 20” diameter wheels. Fabtech leads the industry with this new 6” RTS™ system for superior functionality both on and offroad for the 2011 GM HD.

Price:$2,222.74 Special Price:$1,794.78

Fabtech 6" RTS™ System w/ Black Dirt Logic Shocks- 2011 GM K2500HD 4WD

Mon, 06 Feb 2012 21:29:22 +0000

Price:$3,153.86 Special Price:$2,500.01

Diamond Eye '07.5-'12 DODGE 4" ALUM - DPF RACE DOWNPIPE - WB

Mon, 06 Feb 2012 21:29:22 +0000

THESE PARTS ARE FOR “RACE” APPLICATIONS ONLY! THESE “RACE” APPLICATION PRODUCTS ARE LIMITED TO USE IN GOVERNED COURSE RACING BY A RACING ORGANIZATION. ANY USE, INCLUDING OFF-ROAD USE, COULD BE IN VIOLATION OF LOCAL, STATE AND FEDERAL LAWS. THESE SYSTEMS AND PARTS WILL ALSO REQUIRE ELECTRONIC CONTROL MODULES TO WORK WITH YOUR VEHICLE.

Price:$131.83

Diamond Eye '07.5-'12 DODGE 4" ALUM - DPF RACE DOWNPIPE - NB

Mon, 06 Feb 2012 21:29:22 +0000

Price:$126.38

Diamond Eye '07.5-'12 DODGE 4" ALUM - DPF RACE PIPE - WB

Mon, 06 Feb 2012 21:29:22 +0000

Price:$126.56

Diamond Eye '07.5-'12 DODGE 4" ALUM - DP RACE PIPE - NB

Mon, 06 Feb 2012 21:29:22 +0000

Price:$118.48

Diamond Eye '07.5-'12 DODGE 4" ALUM - DPF RACE PIPE KIT - WB

Mon, 06 Feb 2012 21:29:22 +0000

KIT INCLUDES RACE DOWNPIPE (221020) & RACE PIPE (221022) WITH BUNGS

Price:$233.81

Diamond Eye '07.5-'12 DODGE 4" ALUM - DPF RACE PIPE KIT - NB

Mon, 06 Feb 2012 21:29:22 +0000

Kit includes race pipe and down pipe no bungs

Price:$221.17

Zone Offroad 2011 Chevy/GMC 2500HD/3500HD 4WD 5" Suspension System

Mon, 06 Feb 2012 21:29:22 +0000

5" IFS System If quality and performance is what you demand, then you've come to the right place! The Zone 2011 HD system is built to withstand the trail as well as make a great daily driver. The one piece main crossmembers in combination with the CNC machined steering knuckles create OE style geometry for the ride you demand. The differential skid plate/belly pan offers off-road protection for the serious trails. Combine this with vehicle specific valved Zone shocks and you have a winning combination all made in the USA!

Price:$1,399.94

2007-2001 BMW 335i AFE Cold Air Intake System Upgrade Tubes

Mon, 06 Feb 2012 21:29:22 +0000

he Dynamic Air Scoops from aFe are a simple way to increase air velocity and air flow through your E90/92/93. Dynamic air scoops are constructed out of lightweight black powdercoated aluminum and simply install behind the kidney bean grille. Increased air velocity and flow improves performance and throttle response. This scoop is a perfect addition to a cold air intake installation.

Price:$114.45 Special Price:$109.00

AFE DPF Delete Race Pipe Duramax LMM

Mon, 06 Feb 2012 21:29:22 +0000

The aFe Mach Force XP DPF-Delete Race Pipe upgrade kit is constructed of mandrel bent 409 stainless steel with OE style hangers and clamps. This 4" race pipe provides maximum flow for increased horsepower, torque and throttle response. The increased air flow also lowers EGT's and helps improve MPG. All hardware and components are included for a no-trouble installation. This exhaust fits the Extended Cab Short Bed Duramax LMM models only.

Price:$208.95 Special Price:$199.00

2011 BMW Direct Fit Air Filter 135i, 335i

Mon, 06 Feb 2012 21:29:22 +0000

This filter outflows the factory intake by 33%, increases performance and MPG. Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly space pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Price:$85.63 Special Price:$81.55

aFe Cold Air Intake Stage 2- '11 BMW

Mon, 06 Feb 2012 21:29:22 +0000

This Stage 2 cold air intake system produces 17 max horsepower, 23lbs. x ft. torque and out-flowed the factory intake by 44% on the awesome BMW N55 E90, E92 and E93. This system includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical Pro 5R air filter for maximum flow. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Price:$471.45 Special Price:$449.00

AFE DPF-Delete System w/Muffler

Mon, 06 Feb 2012 21:29:22 +0000

The aFe Mach Force XP DPF-Delete race turbo back exhaust system eliminates the use of the restrictive diesel particulate filter (DPF) for maximum performance and extreme mileage gains. This free flowing exhaust system outflows the factory exhaust by 300cfm is constructed out of durable 4" mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a clean installation. This system comes complete with all tubing, muffler, bayonet hangers, band clamps and is finished off with a high luster 6" polished 304 stainless steel, rolled, slash cut tip. You will be shocked at the performance and mileage improvement you will see from this system. This system requires the use of a controller with a DPF-delete function. This is a "Race Only" product used solely for competition. Its use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. This system also requires an aftermarket electronic module to work properly with the vehicle.

Price:$723.75 Special Price:$579.00

AFE DPF-Delete System No Muffler

Mon, 06 Feb 2012 21:29:22 +0000

Price:$618.75 Special Price:$495.00

AFE DPF-Delete System Race Pipe

Mon, 06 Feb 2012 21:29:22 +0000

The aFe Mach Force XP DPF-Delete Race Pipe eliminates the use of the restrictive diesel particulate filter (DPF) for maximum performance and extreme mileage gains. This free flowing race pipe outflows the factory exhaust by 300cfm is constructed out of durable 4" mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a clean installation. This system comes complete with all tubing, bayonet hangers and band clamps for an easy remove and replace installation. You will be shocked at the performance and mileage improvement you will see from this system. This system requires the use of a controller with a DPF-delete function.

Price:$323.75 Special Price:$259.00

BulletProof EGR Cooler, Square, Lifetime Warranty!

Mon, 06 Feb 2012 21:29:22 +0000

Round Cooler, Square Cooler.... how can you tell?

If you have a 2003, you should have a round style cooler.

If you have a 2005 or newer, you have a square style cooler.

If you have a 2004 model – this is where it gets tricky. Most 2004’s have the square cooler, but a small percentage were produced with the 2003 round version. The easiest way to tell? Check your VIN code. A sample VIN code is: 1FTRW21P24EB10150. In the middle of the VIN code, you see the digits “4EB”. The 4 means that it was a 2004 model year. The “E” denotes which production plant built your truck. In this case, E is for Kentucky. Lastly, the “B” is the start of the sequence number (the last 6 digits of the VIN). Some early 2004 models have a “4EA” code. The “A” denotes the early build and most likely is a round-style cooler. The “B”, “C”, “D” or more all denote later model 2004 builds with square style EGR coolers.

Price:$350.00

BulletProof EGR Cooler, Round, Lifetime Warranty!

Mon, 06 Feb 2012 21:29:22 +0000

If you have a 2003, you should have a round style cooler.

If you have a 2005 or newer, you have a square style coole

Price:$450.00

12mm Dodge 5.9/6.7 ARP Headstuds

Mon, 06 Feb 2012 21:29:22 +0000

ARP 12mm Head stud kit for the 98.5-2007 Dodge 5.9L 24 Valve Cummins Turbo Diesel ARP cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. Their black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Made By ARP. Studs hold up to 80PSI of boost! STUD SETS INCLUDE: * 26 STUDS, NUTS & WASHERS * ARP MOLY LUBE * INSTRUCTIONS All kits include 26 studs, nuts, 12pt nuts, assembly lube and instructions.

Price:$450.55

2003-2007 F-Series, Bypass Oil Filtration Kit

Mon, 06 Feb 2012 21:29:22 +0000

Filters Oil down to 10 microns. Processes up to 1-3 GPM of engine oil.

Engine Oil By-pass Filtration kit that works in conjunction with our BulletProof Engine Oil System. This by-pass filtration provides a second oil filter to your truck. While the primary filter does most of the filtration of all your oil, this system filters your oil much deeper than the primary filter, allowing you to capture and trap the finer bits of debris within your oil. The primary filter has a nominal filter rating of 32 microns. The by-pass filter has a nominal filter rating of 10 microns! That means that small, finer particles that can easily slip through the primary filter set up are now caught and trapped within the by-pass filter.

Price:$385.00

Fully Bullet Proof 6.0L: Oil Cooler System and Bullet Proof EGR Product

Mon, 06 Feb 2012 21:29:22 +0000

Features: * No more clogged engine oil coolers due to casting sand and debris in your coolant! * Prevents the engine oil cooler from rupturing and filling your cooling system with engine oil. * Bullet Proofs the High Pressure Oil Pump (HPOP) filter screen preventing a possible HPOP failure. * Maximizes coolant flow to the EGR cooler to prevent it from overheating. * Stops early injector failure due to overheated and poorly filtered oil. * Stops early engine wear due to overheated and poorly filtered oil. * Stops early turbo failure due to overheated and poorly filtered oil. * Prevents coolant reservoir (degas) venting coolant due to flash boiling of the coolant in the EGR cooler. * Halts EGR cooler rupture failure. * Prevents immediate or delayed catastrophic loss of oil pressure due to a faulty oil filter housing drain valve. * The best part? An engineered solution that allows you to fix your engine oil cooler right!

How the Bullet Proof Oil Cooler Kit Works The Neal Technologies Oil Transfer Block (patent pending) replaces the OE engine oil cooler. The oil transfer block mounts where the OE oil cooler mounted and it utilizes OE gaskets and hardware to retain the assembly to the engine. Engine oil is directed through extreme duty hose, first to the oil filter assembly and then to the oil cooler. The supplied oil filter is much larger and is rated for almost twice the oil flow before bypass than the OE oil filter element. This eliminates the pattern failure of a plugged or restricted oil side of the engine oil cooler, early engine wear due to poorly filtered oil and early injector failure due to poorly filtered oil. Since the engine oil filter is a remotely mounted “spin-on” filter, the need for an oil filter housing drain valve is eliminated. This eliminates the pattern failure of an immediate or delayed catastrophic loss of oil pressure due to a faulty oil filter housing drain valve. In order to maintain or exceed OE engine oil heat removal, an effective liquid to air heat exchanger needed to be utilized. Further, this new engine oil cooler needed to have sufficient air flow to maximize heat transfer. The supplied engine oil cooler is mounted just behind the condenser. The oil cooler is located in direct air for maximum heat transfer. The radiator fan also acts to move air through the oil cooler. Even during extended idle with little to no air flow, the radiator fan moves more than enough air through the oil cooler to effect more than sufficient heat transfer. This eliminates the pattern failures of early injector failure and early engine wear due to overheated engine oil. This also cures the pattern failure of coolant and oil mixing because of a compromised oil/coolant barrier. This system also has the added benefit of liberating the engine oil temperature from the coolant temperature. This means that during cooler seasons, engine oil temperatures can run cooler than can be accomplished with the OE engine oil cooler. Another benefit of this system is the separation of the oil coolers reliance on the engine coolant for heat transfer. Since the OE oil cooler is the highest point in the cooling system, a low coolant condition could effectively render the OE oil cooler inoperative. The oil then travels from the supplied oil cooler back to the Oil Transfer Block. The now fully filtered and cooled oil is then directed to the various oil circuits. The oil transfer block has an integrated High Pressure Oil Pump (HPOP) filter screen. This screen is constructed from stainless steel and will last the life of the engine. This cures the pattern failure of the High Pressure Oil Pump (HPOP) filter screen failing, resulting in the HPOP failing. The Engine Coolant (coolant) enters the Oil Transfer Block from the same path as with the OE oil cooler, but the coolant is diverted directly to the EGR cooler. This eliminates the pattern failure of restricted coolant flow to the EGR cooler caused by a plugged or restricted coolant side of the engine oil cooler and coolant reservoir (degas) venting coolant due to the flash boiling of the coolant in the EGR cooler. This also has the added benefit of much cooler coolant entering the EGR cooler. This in turn allows for more heat to be removed from the exhaust gas before it is blended with the air charge. The result is cleaner combustion with fewer emissions. Everybody wins. The Neal Technologies EGR cooler has been designed to prevent rupture failure, yet operate in a fashion that conforms to OE emission standards. By using a round tube design, stronger materials, and a larger volume of coolant, the strength and reliability of the EGR cooler is greatly improved. This cures the pattern failure of the EGR cooler rupture failure and coolant reservoir (degas) venting coolant due to flash boiling of the coolant in the EGR cooler.

Price:$2,195.00

Bullet Proof Oil Cooler System, 2003-2004 F-Series, Condenser Mount

Mon, 06 Feb 2012 21:29:22 +0000

Bullet Proof Engine Oil System/Cooler for your 2003-2004 F-Series Ford Power Stroke Diesel Air-to-oil cooler mounts behind A/C condenser. Allows for lots of air flow through air cooler. These kits fit 2003-04 Ford Excursions, as well as the F-Series. Video - Characteristics of the Bullet Proof Diesel Oil Cooler Want to learn more about the Bullet Proof System installation? CLICK HERE * Kit Contains: * All the Hoses - Heavy-Duty 5/8" Hydraulic Hose * All the Gaskets - Comprehensive Gasket Kit * Engine Oil Filter - Large Spin-On Oil Filter is Easy To Service * Mounting Bracket - Includes all the Hardware * Instructions - Detailed Instructions for the Bullet Proof Hardware * Oil Transfer Block - Fits Perfectly! How the Bullet Proof Oil Cooler Kit Works The Neal Technologies Oil Transfer Block (patent pending) replaces the OE engine oil cooler. The oil transfer block mounts where the OE oil cooler mounted and it utilizes OE gaskets and hardware to retain the assembly to the engine. Engine oil is directed through extreme duty hose, first to the oil filter assembly and then to the oil cooler. The supplied oil filter is much larger and is rated for almost twice the oil flow before bypass than the OE oil filter element. This eliminates the pattern failure of a plugged or restricted oil side of the engine oil cooler, early engine wear due to poorly filtered oil and early injector failure due to poorly filtered oil. Since the engine oil filter is a remotely mounted “spin-on” filter, the need for an oil filter housing drain valve is eliminated. This eliminates the pattern failure of an immediate or delayed catastrophic loss of oil pressure due to a faulty oil filter housing drain valve. In order to maintain or exceed OE engine oil heat removal, an effective liquid to air heat exchanger needed to be utilized. Further, this new engine oil cooler needed to have sufficient air flow to maximize heat transfer. The supplied engine oil cooler is mounted just behind the condenser. The oil cooler is located in direct air for maximum heat transfer. The radiator fan also acts to move air through the oil cooler. Even during extended idle with little to no air flow, the radiator fan moves more than enough air through the oil cooler to effect more than sufficient heat transfer. This eliminates the pattern failures of early injector failure and early engine wear due to overheated engine oil. This also cures the pattern failure of coolant and oil mixing because of a compromised oil/coolant barrier. This system also has the added benefit of liberating the engine oil temperature from the coolant temperature. This means that during cooler seasons, engine oil temperatures can run cooler than can be accomplished with the OE engine oil cooler. Another benefit of this system is the separation of the oil coolers reliance on the engine coolant for heat transfer. Since the OE oil cooler is the highest point in the cooling system, a low coolant condition could effectively render the OE oil cooler inoperative. The oil then travels from the supplied oil cooler back to the Oil Transfer Block. The now fully filtered and cooled oil is then directed to the various oil circuits. The oil transfer block has an integrated High Pressure Oil Pump (HPOP) filter screen. This screen is constructed from stainless steel and will last the life of the engine. This cures the pattern failure of the High Pressure Oil Pump (HPOP) filter screen failing, resulting in the HPOP failing. The Engine Coolant (coolant) enters the Oil Transfer Block from the same path as with the OE oil cooler, but the coolant is diverted directly to the EGR cooler. This eliminates the pattern failure of restricted coolant flow to the EGR cooler caused by a plugged or restricted coolant side of the engine oil cooler and coolant reservoir (degas) venting coolant due to the flash boiling of the coolant in the EGR cooler. This also has the added benefit of much cooler coolant entering the EGR cooler. This in turn allows for more heat to be removed from the exhaust gas before it is blended with the air charge. The result is cleaner combustion with fewer emissions. Everybody wins. The Neal Technologies EGR cooler has been designed to prevent rupture failure, yet operate in a fashion that conforms to OE emission standards. By using a round tube design, stronger materials, and a larger volume of coolant, the strength and reliability of the EGR cooler is greatly improved. This cures the pattern failure of the EGR cooler rupture failure and coolant reservoir (degas) venting coolant due to flash boiling of the coolant in the EGR cooler.

Price:$1,895.00

Bullet Proof Oil Cooler System, 2005-2007 F-Series, Condenser Mount

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,895.00

Bullet Proof Oil Cooler System, 2003-2004 F-Series, Bumper Mount

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,895.00

Bullet Proof Oil Cooler System, 2005-2007 F-Series, Bumper Mount

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,895.00

AutoMeter LED Lighting Dimmer

Mon, 06 Feb 2012 21:29:22 +0000

This compact separate module is designed to allow for isolated dimming for all Auto Meter gauges utilizing LED lighting technology separate from your vehicle's OEM dash. Supports up to 6 instruments.

Price:$46.57 Special Price:$34.93

H&S EGR/Cooler Delete- '09-'12 Dodge 6.7

Mon, 06 Feb 2012 21:29:22 +0000

- Fits all 2009 - 2010 Dodge 6.7 Cummins Pickup and Cab & Chassis - Allows removal of the EGR assembly, crossover tube, and EGR cooler - Dress up the engine bay - Billet aluminum - Necessary when upgrading to a larger turbo NOTE: Will cause check engine lights if not used with an emissions delete tuner.

Price:$149.00 Special Price:$141.55

Ford Rear Shackle Flip Kit 78-97

Mon, 06 Feb 2012 21:29:22 +0000

Sky's Off-Road is the only company producing a rear shackle flip kit for the Ford vehicles so far. This adds 4.5 inch's of lift. On Bronco based vehicles, no modifications are needed to correct pinion angle if only the flip kit is used. On long wheel base vehicles, using factory blocks, we recommend a 4 inch lift block with a 4 degree taper replace the factory blocks, in reverse of stock. This will correct pinion angle and move the axle slightly rearward. On vehicles using aftermarket lift springs, it may require that you move the front solid hanger rearward up to 2 inch's. Tired of the weak torch and turn shackle flip kits. Want something strong and attractive looking? Need it to bolt on? We've covered it all with our bolt on shackle flip kit for the rear shackle on almost any Ford pickup or Bronco with 3" wide rear springs. Moves the shackle forward 1 inch for better ride and angle, bolts to stock location of factory upwards shackle hanger, constructed of 1/4 and 3/8ths steel plate, laser cut and CNC formed. The Ford shackle reversal bolted in the stock location adds Aprx. 4.5 inch's of lift. Some may prefer to weld on the bracket, depending on location this will add or subtract lift on the principal of an one inch shackle movement adds or subtracts 1/2 inch of lift. Available in raw steel or Special Order black powdercoat addl $20

Price:$169.00 Special Price:$165.00

Jeep TJ Wrangler 2.5" Suspension / 1¼" Body

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: New Combo Suspension / Body Lift Front: Progressive coil springs, and transfer case spacers to maintain factory driveshaft angles. Rear: Progressive coil springs. Shocks: (4) High Performance 2.2 series shocks. Body Lift: (11) Fiberglass reinforced nylon body pucks, shift control bracket, grill bumpstops, and grade 8 hardware.

Notes: • Does NOT fit 05-06 6-speed manual transmissions. • Must know vehicle engine size when ordering. Benefits: • Clears up to 33" tires. • 100% bolt-on installation. • Increased ground clearance. • Levels the front with the rear of the Jeep. • Progressive rate springs for enhanced ride quality. • Performance 2.2 shock features: • Large 2.2" diameter body. • Massive 41.4 mm diameter piston. • 17.5mm chrome hardened piston rod.

Price:$429.95 Special Price:$389.95

Fass HD Series 220GPH 45psi

Mon, 06 Feb 2012 21:29:22 +0000

1994-98 4X4 Dodge Ram Cummins 220 GPH Flow Rate 45PSI Heavy Duty Series

Price:$892.05

Diamond Eye 5" Aluminized Turbo Back Exhaust w/Muffler

Mon, 06 Feb 2012 21:29:22 +0000

K5238A - 2004.5, 2005, 2006 EARLY 2007 - DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS) - 5" ALUMINIZED - PERFORMANCE DIESEL EXHAUST KIT - TURBO BACK (OFF-ROAD) SINGLE - FEATURES TRUE 5" DOWN PIPE

Price:$633.31 Special Price:$496.76

Fass HD Series 95GPH

Mon, 06 Feb 2012 21:29:22 +0000

1994-98 4X4 Dodge Ram Cummins 95 GPH Flow Rate Heavy Duty Series

Price:$673.55

Fass HD Series 90GPH 45psi

Mon, 06 Feb 2012 21:29:22 +0000

1994-98 4X4 Dodge Ram Cummins 90 GPH Flow Rate 45PSI Heavy Duty Series

Price:$787.55

Diamond Eye 5" ALUMINIZED LOUVERED MUFFLER

Mon, 06 Feb 2012 21:29:22 +0000

5" ALUMINIZED LOUVERED HIGH FLOW- STRAIGHT THROUGH PERFORMANCE MUFFLER - 5" I.D. X 5" I.D. Length - 30"

Price:$119.39 Special Price:$83.57

AutoMeterTriple Pillar (Black)

Mon, 06 Feb 2012 21:29:22 +0000

Triple pillar mount for Dodge Ram 1994-1997

Price:$61.25

AutoMeter Dual Pillar (Black)

Mon, 06 Feb 2012 21:29:22 +0000

Dual gauge pillar mount for 1994-1997 Dodge Ram

Price:$59.25

$25 REBATE or FREE DASH MOUNT! Edge Insight CTS

Mon, 06 Feb 2012 21:29:22 +0000

Features • Available for 1996 and newer vehicles equipped with an OBDII (diagnostic)port • Full-Color, High-Resolution, 4.3-inch Touch Screen (CTS) • Displays available SAE data from your vehicle’s computer* • Data parameters (PIDs) on CTS products will vary by vehicle year, make, and model. • View parameters in numeric or analog style gauge display • Built-in safety features: user-defined visual and audible alerts • Digital gauge display/scan tool (does not reprogram/tune the vehicle or add power) • Can be used in conjunction with Edge or other performance products to read vital engine data • Great Value because it monitors much more than just a typical 3-guage cluster • Sounds user-defined audible alerts Scan Tool Capture and record even more information about the vehicle’s performance with the Insight’s scan tool feature. • Displays and clears diagnostic trouble codes with full text description* • Displays peak values such as speed and RPM* • Performance testing: 0-60 and quarter-mile times Bonus Features • Adjust EFILive™ Tuned PCMS on-the-fly On 2001-2005 LB7 and LLY Duramax engines you can now change the power levels on-the-fly created by your EFILive™ custom tuning software with your Edge Insight CTS! Simply use your EFILive™ software to change your DSP5 Switch Type from “hard wire” to “serial”. Once you are set up to support “serial” communication, simply use the up and down arrow buttons on your Insight to adjust EFILive™ tunes on-the-fly. • Displays Fuel Rail Pressure on Duramax Engines • Displays Diesel Particulate Filter (DPF) Regeneration Status on new diesels with DPF traps Expandable (items sold separately) • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories • Compatible with optional EGT pyrometer for engine protection BACK-UP CAMERA (sold separately) The Insight CTS features a built-in video port that allows users to connect the state-of-the-art Edge back-up camera, or other compatible video source directly to the CTS unit. MYSTYLE™ SOFTWARE (included) MyStyle™ software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CTS unit for the ultimate in customizability.

Price:$448.88 Special Price:$399.00

Gen Right Twisted Pitman Arm

Mon, 06 Feb 2012 21:29:22 +0000

This is the new and innovative GenRight Twisted Pitman Arm kit to correct the angle issues inherent in hi-steer set ups (on long travel suspension systems using heims). We create a stronger double shear pitman arm that uses a beefier 5/8" size Grade 8 bolt that is twisted to allow the heim to work within it's range of motion. This is a perfect compliment to any long travel suspension and is designed to be used with hi-steer type arms on Dana 60's, 44's or 30's. This Heavy Duty product will hold up to big tires and off-road abuse. Got a hydraulic ram? It will work with that too. Still not sure you need this? You will find this product on every one of our GenRight Jeeps! FEATURES include: * "Twisted" to utilize the full (down) range of motion in a heim rod end. * Laser cut & CNC bent from 1/4" thick steel plate. * Design is puzzled together for maximum interlocked strength. * Stronger than stock Double Shear design (1-3/4" wide). * Includes 5/8" size Grade 8 mounting hardware. * Tapered spline is TIG welded into the GenRight Twisted arm. * 5-1/2" center to center (same as stock TJ or YJ). * Unique internal thread for easy removal from sector shaft (tool # STK-2520). Why Heim rod ends? We prefer the heims over the standard or heavy duty "tapered style" tie rod ends because, over the years we have seen the taper on the tie rod end SPLIT too many steel knuckles! This is the exact same steering set up we have used on our GenRight rigs for years, and it works great!

Price:$162.00

MBRP 409 Stainless Steel 4" Turbo Back Single

Mon, 06 Feb 2012 21:29:22 +0000

MBRP's XP Series is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system's rugged sixteen gauge T409 construction can be counted on to withstand everything from salt to rocks, tar to grime. We have had such success with this line that we back it with a Lifetime Warranty. Built to Perform You count on your truck to tow all of your gear to where you want it. With your MBRP performance exhaust you can make that happen with up to 18 HP more horsepower and 28 ft/lb more torque. Give your truck more pulling power and much improved throttle response with an MBRP diesel exhaust system. Our systems are so much more efficient, it will be easy to see what your truck can really do. Minimize Backpressure The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200?F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Easy Installation MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installing this on your truck a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have. We're With You Here at MBRP we take "customer service" very personally. Need help finding the right system...finding a dealer...working through your install...we are here to help. Give us a call toll free at 888 636 7223. Sound & Style Performance is one thing but at MBRP we believe that appearance and sound is just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our MBRP brand etched on the tip and our unmistakable styling, there's no question that you have the hottest exhaust on the road - MBRP.

Price:$613.46 Special Price:$496.61

XZT + for Dodge 98-02

Mon, 06 Feb 2012 21:29:22 +0000

The NEW XZT+ for the 98-02 Dodge Cummins is in a class of its own. New in 2007, we have revived an old product with new technology to offer more features, more power, and better fuel economy for the VP44 equipped trucks. This one of kind power module will provide an additional 65 HP and 200 Ft. Lbs. of torque to your truck. Installation is simple and takes less than 10 minutes to install with only 2 simple connections made on your engine. You do not “tap” the pump wire and it is 100% invisible to the dealer once removed. Adjustments on the fly are made simple with a 3 position toggle switch. There is an “off” setting, fuel mileage setting, and a horsepower setting available at your fingertips. To start with, we completely re-designed the XZT+ from the ground up. The core of this awesome module is an extremely powerful 32 bit processor. Quadzilla is the only manufacturer using 32 bit processing for power modules. What this means to you is that we can look at more parameters and provide better fueling and timing control than anyone else. Our fueling and timing maps are more complex than anyone else and it provides the smoothest, most instantaneous power you have ever felt! Adding to that, the XZT + is also USB updatable with multiple tuning files available for download off of our website. We know that not every person is looking for the same thing in a power module so we decided to offer plenty of options to suit everyone’s needs. Whether it is smoke you are looking for, fuel economy, instant power, or no smoke there will be a tuning file available for you. It takes less than a minute to update your module with the included USB cable. You can change files back and forth as many times as you would like. This is also an industry first for power modules. Not only does this module have all of these features, but we also guarantee that your truck will be more fun to drive than ever before. This module will compliment a host of other products on the market and improve them greatly, including our XZT and Xzillaraider modules. The XZT+ has the best throttle response of any module in its class, yet it is very docile and has none of the ugly characteristics that many of the other products on the market have. To make the XZT+ even more appealing, Quadzilla has priced this module to be the best value possible for your truck. Many of the other products on the market are hundreds of dollars more and do not even provide half of the features that the XZT+ does.

Price:$399.00 Special Price:$339.15

Gen Right Heavy Duty Trac Bar Kit, TJ

Mon, 06 Feb 2012 21:29:22 +0000

This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. This builders kit comes with the Johnny Joint pre-welded on one side and longer than necessary so you can cut the trac bar tube to match your Jeeps steering. Then just weld in the threaded bung for the heim on the axle side and you are all set! This is the same kit included in our front 3 link kit and the same parts we have reliably run on our GenRight Jeeps for years! This particular kit was designed to lengthen the trac bar (to better match the drag link) and eliminate bump steer. NOT recommended for use with the stock crossover ("Y" link) type steering linkages. Since this is a universal kit that is also extremely heavy duty it is a recommended upgrade if you are running hydro assist or full hydraulic steering on your vehicle.

NOTES: * Although this builders kit is sold as a pre-welded kit, but still requires welding to properly attach these component parts to the frame and axle of your vehicle. * This kit requires cutting off the stock trac bar mount and welding on this new mounts. * A trac bar is pre-welded with the Johnny Joint (one one end) & the heim end still needs the threaded insert welded in after the tube is cut to length. * For optimal function and no bump steer the Trac Bar needs to be cut to best match your vehicles axle width and drag link length. * Designed to work with our 3 link but can be adapted to work with other radius arm or 4 link suspension kits. * Once installed, you MUST cycle the front suspension and steering (in all possible combinations & directions) to make sure NONE of the steering or suspension components will bind or otherwise collide with eachother. DO NOT exceed the range of motion which would damage the steering or suspension components and could cause a failure resulting in a loss of steering control!

Price:$289.00

Gen Right Drag Link Correction Kit

Mon, 06 Feb 2012 21:29:22 +0000

This is the GenRight Drag Link Correction Kit with heims. It includes our Twisted Pitman Arm, heims, bungs, jam nuts, bolts and our Hi-Steer Arm Mount to correct the angle issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and hi-steer arm are flat). We create DOUBLE shear mounts at both ends using a 5/8" Grade 8 bolt. This Heavy Duty kit will hold up to big tires and off-road abuse. Got a hydraulic ram? It will work with that too.

Important NOTES: * This kit requires cutting and welding to properly install it on a off road vehicle. * Once installed, you must cycle the front suspension and steering to make sure the hi-misalignment heims do not exceed their range of motion which would damage the steering components!

Price:$385.00

Industrial Injection Dragon Fly Injectors

Mon, 06 Feb 2012 21:29:22 +0000

NEW 50 HP increase over stock injectors. The Dragon Fly injectors are designed to run with the stock CP3 fuel pump. Electronic fueling upgrades will enhance the effect of the Dragon Fly injectors. Testing on company trucks and feed back from customers show these injectors are capable of 600 RWHP.

Price:$3,000.00

Rock Recovery™ Winch Line

Mon, 06 Feb 2012 21:29:22 +0000

Trail-Gear knows that when it is time for a recovery that the last thing you need is a broken winch line, so we made our Rock Recovery™ Winch Line from 100% pure Dyneema Fiber (SK-75), which is the strongest and most UV resistant material in the world for synthetic winch lines. Our Rock Recovery™ Winch Lines come with a stainless steel thimble and are all pre-stretched, 12-strand braids. They also come with the first 5 feet covered with a black nylon sleeve to protect the line from rocks and trees. Synthetic winch line is about 45% stronger than conventional steel cable and weighs only a fraction of what steel cable weighs. In fact, synthetic winch line is so light it floats on water. When steel cable winch line fails, breaks, or comes off of the attachment point it recoils from stored energy, snaps back, and can be deadly. There is almost no snap back at all with synthetic winch line because it does not store energy like the steel cable, this is why steel cable winch line is no longer permitted at most off road competitions or races. Synthetic winch line is very flexible, but does not curl or kink and will never cut your fingers.

Price:$75.00

BD-Power Exhaust Manifold

Mon, 06 Feb 2012 21:29:22 +0000

Stop exhaust manifold cracks in their tracks with BD’s new Pulse exhaust manifold for the Dodge-Cummins. Cast from high silicon ductile iron, the Pulse features expansion joints that allow the manifold to expand and contract without cracking or exhaust leaks. As the name would imply, these manifolds are “pulse tuned” to assist in combustion chamber evacuation and increased exhaust flow. The result is quicker turbo spool-up, reduced backpressure, increased power and better fuel economy. Some kits include stainless steel fasteners and washers to prevent lost or loose manifold bolts - gaskets are available separately.

Price:$550.00 Special Price:$470.25

BD-Power Exhaust Manifold Gaskets 12 Valve

Mon, 06 Feb 2012 21:29:22 +0000

Gasket Set, Exhaust Manifold - 1988-1998 Dodge 12-Valve

Price:$31.00 Special Price:$26.13

BD-Power Exhaust Manifold Gaskets 24 Valve

Mon, 06 Feb 2012 21:29:22 +0000

Gasket Set, Exhaust Manifold - 1998-2007 Dodge 24-Valve

Price:$72.50 Special Price:$61.75

MBRP Aluminized Catalytic Converter Test Pipe/Delete Pipe

Mon, 06 Feb 2012 21:29:22 +0000

Have you ever wondered how your ride would perform without the catalytic converter? Try this out and experience the difference. Constructed from heavy duty aluminized steel you can count on this pipe lasting for years to come.

Price:$99.99 Special Price:$89.99

Industrial Injection Nozzles 200-250HP

Mon, 06 Feb 2012 21:29:22 +0000

SET OF RACE THREE 45LPH 200-250HP EDM NOZZLES

Price:$1,200.00

Industrial Injection Nozzles 250-300HP

Mon, 06 Feb 2012 21:29:22 +0000

SET OF RACE FIVE 65LPH 250-300HP EDM NOZZLES

Price:$1,200.00

Industrial Injection 60HP Nozzles

Mon, 06 Feb 2012 21:29:22 +0000

SET OF 27LPH 60 HP NOZZLES

Price:$690.00

Industrial Injection 100HP Nozzles

Mon, 06 Feb 2012 21:29:22 +0000

SET OF RACE ONE 29LPH 100 HP NOZZLES

Price:$690.00

$50 REBATE or FREE DASH MOUNT! Edge Juice with Attitude CTS - '98.5-'00 Dodge 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- 6 On-the-Fly Adjustable Power Levels* - Full-color, high-resolution, 4.3 inch touchscreen (CTS) - Up to an Additional 120 HP and 350 ft lb Torque* - Increase Fuel Economy* - Greatly Improves Drivability - Enhances Towing Performance - Excellent Throttle Response - Easy Instillation - Ships with a universal suction cup mount - Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately) - Includes light sensitivity meter to dim screen as ambient light decreases - Internet Updateable (Attitude only) - Hot Unlock Codes available to unlock additional performance (additional fee and waiver required) Level 0: Stock Level 1: 40 Horsepower - 150 Foot Pounds of Torque Level 2: 60 Horsepower - 200 Foot Pounds of Torque Level 3: 80 Horsepower - 250 Foot Pounds of Torque Level 4: 100 Horsepower - 300 Foot Pounds of Torque Level 5: 120 Horsepower - 350 Foot Pounds of Torque Level 6: 120* Horsepower – 350* Foot Pounds of Torque Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form. GAUGES When used with the Attitude CTS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time. • Backdown % • Voltage • EGT (exhaust gas temp) • Engine Coolant Temp • Engine Fuel Pressure (pressure of the fuel “lift pump”) • Fuel Temperature (measured in the VP44 injector pump) • Intake Air Temp • Engine Load % (only on later models) • Module Temperature (internal temperature of the module) • RPM • Speed MPH • Throttle % • Transmission Temp • Turbo Boost Pressure • Oil Pressure SAFETY FEATURES • Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip* • Turbo Timer* (allows turbo to cool before truck shuts off) • Cold Engine Protection (no extra fuel is added until the engine is warm) • User-Adjustable Audible Alert Settings IMPROVED DRIVEABILITY FEATURES • Low-Boost Fueling Adjustment • Shift Defuel Setting* PERFORMANCE TESTING, ALERTS & RECORDS Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters. EXPANDABLE (items sold separately) • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories BACK-UP CAMERA (sold separately) The Attitude CTS features a built-in video port that allows users to connect the state-of-the-art Edge back-up camera, or other compatible video source directly to the CTS unit. MYSTYLE™ SOFTWARE (included) MyStyle™ software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.

Price:$979.00

Rigid Industries 4" E-Series LED Lightbar - Spot

Mon, 06 Feb 2012 21:29:22 +0000

Rigid Industries is the original pioneer of the Forward Projecting LED Lightbars. Rigid's E Series continues to push the envelope with its superior optics and unmatched efficiency. Rigid's E Series uses their patented hybrid reflector system which gives them the brightest, most efficient LED light on the market. Having the greatest lumen output per watt available on the market is why Rigid's E Series is the leader in LED lighting solutions.

Price:$234.99 Special Price:$223.24

Rigid Industries 30" E-Series LED Lightbar - Combo

Mon, 06 Feb 2012 21:29:22 +0000

Price:$999.00 Special Price:$949.00

Rigid Industries 4" E-Series LED Lightbar - Flood

Mon, 06 Feb 2012 21:29:22 +0000

Price:$234.99 Special Price:$223.24

Diablo Sport Power Puck

Mon, 06 Feb 2012 21:29:22 +0000

The Power Puck remaps the fuel delivery of the diesel injection pump and advances the injection-timing curve. The PowerPuck software works on changing the injection quantities an advancing the ignition curve, it will not alter the load pressure directly. The load pressure is increased due to the increase in fuel volume delivery. This in itself makes for an extremely reliable tuning device with one sole purpose, POWER! PowerPuck equipped vehicles will notice significant improvements in drivability, whether it is in town, where speeds constantly change, or on the highway passing slower vehicles. Power Puck increase's power through the entire RPM range, at low RPM it will yield better throttle response; and help maintain speeds on inclines or when towing. The mid-to-upper power increase is extremely useful on the highway to maneuver through heavy traffic situations. Stackable with Predator for a variety of performance levels

Price:$235.00 Special Price:$199.00

Co-Pilot Transmission Controller - 2001-05 GM Allison 1000

Mon, 06 Feb 2012 21:29:22 +0000

The ATS Co-Pilot Upgrade Kit for the Allison 1000 Transmission solves the major problems with the stock Allison LCT-1000. When you increase the power of the Duramax, the stock Allison 1000 transmission begins to slip in 5th gear. The factory single-disc torque converter lockup clutch begins to slip. This slippage causes the Allison 1000 to go into "fail safe" mode preventing you from getting your Duramax power to the ground. The stock Allison transmission only receives approximately 86 PSI oil pressure to the clutch packs when in 5th gear. After the addition of the Co-Pilot transmission system, the clutch packs receive approximately 230 PSI, allowing the transmissions clutch packs to receive full line pressure (clamping force needed to apply the clutches) during high power situations. With the simple addition of our Co-Pilot transmission kit pushing the available line pressure to the clutch packs, we have designed a system that increases the torque capacity of the Allison transmission by over 200 foot pounds. This kit makes it possible to transfer 100% of the power developed by a modified engine to the rear wheels without causing the transmission to slip and the "fail safe" condition to occur. When the ATS Billet transmission is installed in addition to the Co-Pilot, the clutch pack pressures are around 290 PSI during high power conditions which is a 170% hydraulic increase in torque capacity. This increased pressure is only in effect during high engine torque output unlike other mechanical kits that do not use electronic controls. This removes the concern of excessive pressure on vital transmission parts such as delivery rings, drums and shafts during normal operation. There were great concerns during development of this kit to ensure long transmission life along with providing great performance. If more holding force is needed beyond what this kit supplies, the Billet transmission is a better option.

Price:$1,175.00 Special Price:$1,116.25

Carli Extreme Duty Ball Joint Package

Mon, 06 Feb 2012 21:29:22 +0000

Extreme Duty Ball Joints The ball joints start out as a chunk of specialty chosen material which is machined to our unique design and then heat treated to a specified rockwell (hardness). From there the ball joints head to an aero-space lube company where a proprietary dry-lube coating is applied to our specified thickness. And of course we top them off with an accessible zerk fitting for easy servicing, plus we even include a tube of high quality synthetic grease with each ball joint set.

Extensive testing on the ball joints through Carli Suspension's product research and development cycle is now complete. We have logged thousands of nasty dirt miles over the past year to ensure that this product would be everything you have come to expect from us. These new Extreme Duty Ball Joints should yield a service life for as long as you own your truck and we're confident enough to offer a lifetime warranty. With an average labor of $500.00, the end user actually saves money the first time that they don't have to replace them.

Increased Feel and Axle Performance By removing even .0625 inches of deflection times two axle ends omits 1/6" of an inch, or more, of ball joint deflection. You can feel it in the steering wheel. 35 and 37 inch tires, more stress and off-road impacts only exaggerate the movement, and subsequently, its affect. Your truck feels tighter and the steering wheel goes numb, even over pot holes and rail road tracks. The secondary tire movement, once eliminated, gives you a more controlled feel. Sometimes when you hit a sharp lip on the street, it feels like you hit two bumps, that aftershock is the tire's secondary movement from O.E.M. lower ball joint deflection. The front end of your truck will feel improved, or we'll buy the product back from you - guaranteed.

Price:$800.00

Rough Country XJ Front Quick Disconnects

Mon, 06 Feb 2012 21:29:22 +0000

Quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.

Price:$69.95

Carli Adjustable Track Bar

Mon, 06 Feb 2012 21:29:22 +0000

Dodge Ram Adjustable Chromoly Track Bar This adjustable track bar is a must for any Dodge 2500-3500 4x4 with a lift. The track bar will center the axle side to side and ensure proper suspension geometry. The track bar will also give a tighter feel to the front end by eliminating the O.E.M rubber bushings. SPECIFICATIONS Contructed from 1.50 x .250 wall Chromoly tube CNC bent for perfect fitment Tig-Welded in house 7/8" bearing on the axle side Delrin bushin on frame side

Price:$345.00

Autometer Triple Pillar Mount No Speaker

Mon, 06 Feb 2012 21:29:22 +0000

1998-2002 Dodge Ram (except '02 1500)

Price:$64.95

Autometer Triple Pillar Mount With Speaker

Mon, 06 Feb 2012 21:29:22 +0000

1998-2002 Dodge Ram with Speaker

Price:$64.95

17" Muffler Delete Pipe

Mon, 06 Feb 2012 21:29:22 +0000

There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that MBRP build what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours.

Price:$71.02 Special Price:$54.76

Autometer/Edge Pillar Mount Ram 2003-2009

Mon, 06 Feb 2012 21:29:22 +0000

Mounts Edge Attitude/CS Controller and one Auto Meter gauge 2-1/16th"

Price:$64.99

BD-Power VP44 Stealth Pump Cover Kit

Mon, 06 Feb 2012 21:29:22 +0000

The BD Stealth Cover for the 1998.5 to 2002 Dodge 24V fits onto the VP44 injection pump, providing a secure, sealed connection instead of notching the pump wire for power mods like an Edge Comp or TST box. A notched wire is not only noticeable, but a break in the wire cover can result in corrosion and a poor connection. The Stealth Cover from BD makes for a clean install and easy removal of racing performance boxes--plus it provides a more reliable connection. A must for the enthusiast.

Price:$72.77 Special Price:$61.75

Autometer Factory Match Boost Gauge 100psi

Mon, 06 Feb 2012 21:29:22 +0000

Includes 10 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fitting.

Price:$76.66

Autometer Factory Match Transmission Temperature

Mon, 06 Feb 2012 21:29:22 +0000

Includes 1/8" NPT Sender. Air-Core meter movement. Includes 3/8"" NPT adapter/fitting. Includes 1/2"" NPT adapter/fitting. If mounting temperature sender in a steel fluid pan

Price:$71.29

Autometer Factory Match Pyrometer

Mon, 06 Feb 2012 21:29:22 +0000

Full Sweep, Stepper Motor meter movement. Air-Core meter movement. Includes Type K Thermocouple.

Price:$182.59

Autometer Factory Match Pyrometer

Mon, 06 Feb 2012 21:29:22 +0000

Full Sweep, Stepper Motor meter movement. Includes 8 ft. tubing or wiring harness. Includes Type K Thermocouple.

Price:$187.16

Autometer Factory Match Rail Psi Gauge (6.7L)

Mon, 06 Feb 2012 21:29:22 +0000

Full Sweep, Stepper Motor meter movement. Includes 8 ft. tubing or wiring harness. For use with 2007.5 and Newer Dodge Cummins 6.7L

Connects to original equipment fuel rail pressure sensor wiring.

Price:$189.99

Autometer Factory Match Fuel Psi Gauge

Mon, 06 Feb 2012 21:29:22 +0000

Full Sweep, Stepper Motor meter movement. Includes 1/8" NPT Sender.

Price:$199.89

Autometer Factory Match Boost Gauge 35psi

Mon, 06 Feb 2012 21:29:22 +0000

Includes 10 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fitting.

Price:$71.91

Autometer Factory Match Boost Gauge 60 psi

Mon, 06 Feb 2012 21:29:22 +0000

Includes 10 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fitting.

Price:$71.91

Autometer Factory Match Rail Psi Gauge (5.9L)

Mon, 06 Feb 2012 21:29:22 +0000

Full Sweep, Stepper Motor meter movement. Includes 8 ft. tubing or wiring harness. For use with 2003-2007.5 Dodge Cummins 5.9L Engine ONLY Connects to original equipment fuel rail pressure sensor wiring.

Price:$189.99

Dual Steering Column Pod: 03-09 Ram

Mon, 06 Feb 2012 21:29:22 +0000

For use with Auto Meter 2 1/16" gauges. Comes only in black finish. Great for adding a Rail Pressure and Fuel Pressure gauge!

Price:$39.95 Special Price:$35.00

Single Steering Column Pod: Ram 03-09

Mon, 06 Feb 2012 21:29:22 +0000

For use with Auto Meter 2 1/16" gauges. Great for adding a Rail Pressure or Fuel Pressure gauge!

Price:$37.95 Special Price:$33.00

Triple Overhead Console Pod: Ram 03-09

Mon, 06 Feb 2012 21:29:22 +0000

Mounts directly above rear view mirror. Great way to mount your gauges without losing your grab handle!

Price:$59.95 Special Price:$54.00

Dual Overhead Console Pod: Ram 03-09

Mon, 06 Feb 2012 21:29:22 +0000

Mounts gauges directly above rear view mirror. Great way to mount gauges without losing your grab handle!

Price:$57.95 Special Price:$53.00

Dodge Ram Front End Upgrade Kit

Mon, 06 Feb 2012 21:29:22 +0000

Has the steering on your Dodge Ram lost that tight feel? It is very common for the front end of these heavy trucks to loosen up after seeing some miles. Dahmler-Chrysler has sent out many TSB's regarding excessive play in the O.E.M. track bar and weak performance in the O.E.M. steering stabilizer. You may also hear from your dealer that there is an allowable amount of play in the upper ball joints before they need to be replaced. We have seen hundreds of trucks pass through the shop with any or all of these problems. Symptoms may vary from a slight shutter in the steering wheel to the dreaded death wobble. Solution: We have put together the Front End Upgrade Kit to properly correct these issues the first time. By including all the key front end components in a package we can guarantee that your truck will feel and handle like a completely different truck. Tighter and more precise steering are both features that you can expect after installing this system. Why it works: The reason that the Front End Upgrade Kit will make such a dramatic improvement is because we replace the 3 most problematic components in the front end: 1. The O.E.M track bar which has vulcanized rubber bushings on both ends. The rubber bushings are prone to breakdown over time which will cause excessive side-to-side movement of the front axle. Our Adjustable track Bar has a 3/4" chromoly rod end with a 7/8" threaded shaft at the axle end, and a heavy duty Delrin bushing at the frame end. This will eliminate any unwarranted movement from the axle and holds a much longer service life. 2. The O.E.M. steering stabilizer is what is called an "oil shock". This means that there is no gas pressure to create resistance when cycling the shock. This type of stabilizer is limited to how much dampening it can provide. Our High Mount Steering Stabilizer uses an Internal Floating Piston (IFP) style stabilizer which has a separate chamber to house the nitrogen gas keeping it separate from the oil. This makes the stabilizer much more effective when reacting to sudden direction changes and "steering shimmy". Our stabilizer is also 100% rebuildable. 3. The O.E.M. upper ball joint (actually a "pivot joint") uses a soft internal bronze bushing as the lubricant between the pin and the cup. The internal bushing can only tolerate a certain amount of load before it deforms and creates space for the pin to move laterally. Our Heavy Duty Upper Ball Joints are a 2 tiered design machined out of 4130 chromoly and heat treated to our specified hardness. This gives more than 100% more surface area for the ball joint to distribute the load. We eliminate any sort of bushing by using a dry aerospace type lubricant which is applied by machine. We have also incorporated internal grease ports for the grease to distribute evenly through the whole assembly.

Price:$1,450.00

Dodge Leveling Kit

Mon, 06 Feb 2012 21:29:22 +0000

Dodge Ram Leveling Kit Carli Multi-Rate Coil Springs add 3 inches of ride height to the front of your Dodge Ram. Stainless sway bar end-links are included that can be adjusted for 0 to 3 inches of lift. Our own Bilstein 5100 series shock absorber tune for the Dodge Ram will improve the front ride quality significantly and provide 10" of travel.

Ride quality and off-road performance The leveling kit comes with our Multi-Rate Coils that offer a soft initial rate for the first inches of suspension travel. The Bilstein 5100 shock is our own part number, because we refined the tune for the Dodge Ram. Offering 10 inches of wheel travel with more control gives you a step up if you're off-road. The combination of spring rate, a custom shock tune and additional wheel travel is what you feel, on or off the road. This is a good gain over stock and if the time comes to step up, you can utilize your coils and end-links to build your truck progressively.

Price:$825.00

Dodge Commander Pillar Mount

Mon, 06 Feb 2012 21:29:22 +0000

Quadzilla Dodge Commander Pillar

Price:$79.95 Special Price:$60.49

FASS 150 HD Fuel Filter 3 Micron

Mon, 06 Feb 2012 21:29:22 +0000

3 Micron FASS filter

Price:$24.95 Special Price:$23.70

FASS HD Series Water Separator

Mon, 06 Feb 2012 21:29:22 +0000

FASS FS-1001 Water Separator FASS 150 Series Replacement Filter - We recommend that the Water Separator on the FASS 150 be changed every 15,000 miles or when needed.

Price:$20.90

Isspro EV2 Fuel Pressure Gauge

Mon, 06 Feb 2012 21:29:22 +0000

ISSPRO’s EV² Series matches your OEM gauges to a “T.“ LED lighting matches. Colors match. Fonts match. As a long time supplier to truck OEMs, we understand the importance of finely tuned design details. » ISSPRO’s EV² has all the bells and whistles. Microprocessor-controlled stepper motor movements. LED back lighting. Precision senders. 270° sweep. All electric gauges. » ISSPRO knows diesel. ISSPRO has been engineering and building diesel instrumentation for over 60 years. In addition to aftermarket performance gauge systems, we custom design diesel instrumentation for OEM customers.

Price:$129.18

2007-2010 Cummins 6.7L Down Pipe Stainless

Mon, 06 Feb 2012 21:29:22 +0000

The aFe Mach Force XP Race Down pipe upgrade kit is constructed of mandrel bent 409 stainless steel with OE style hangers and clamps. This 4" downpipe provides maximum flow for increased horsepower, torque and throttle response. The increased air flow also lowers EGT's and helps improve MPG. All hardware and components are included for a no-trouble installation.

Price:$211.05 Special Price:$201.00

2007-2010 DPF Delete Pipe Cummins 6.7L Stainless

Mon, 06 Feb 2012 21:29:22 +0000

The aFe Mach Force XP DPF-Delete Race Pipe kit is constructed of mandrel bent 409 stainless steel with OE style hangers and clamps and eliminates the Diesel Particulate Filter (DPF). This 4" race pipe provides maximum flow for increased horsepower, torque and throttle response. The increased air flow also lowers EGT's and helps improve MPG. All hardware and components are included for a no-trouble installation.

Price:$211.05 Special Price:$201.00

RUBICON EXPRESS SHACKLE XJ REAR 5"

Mon, 06 Feb 2012 21:29:22 +0000

Extended rear shackles for XJ, 1.25" lift. H.D. shackle features greasable bushing and will lift rear of Cherokee 1.25". A must for maximizing wheel travel on aftermarket spring packs. Black powder coat and clearance for bumper bolts.

Price:$97.95

2007-2010 Dodge 6.7 DPF Delete Pipe No Bungs

Mon, 06 Feb 2012 21:29:22 +0000

H&S racing exhaust kits are designed for maximum flow, with straight piped sound! Our kits for the 6.7 Dodge Cummins will leave the competition in the smoke! When you're ready to take your 6.7 to new heights, go with an off-road exhaust system from H&S Performance! * 4" mandrel-bent pipes free flowing pipes * No more clogged DPF's that could end your day at the track early * No more outrageous EGT's that can damage your motor and cause premature wear and tear * Bolt-On Design, No cutting or welding necessary

Price:$225.00 Special Price:$213.75

2007-2010 Dodge 6.7 Stage 2 DPF Delete/Downpipe Kit No Bungs

Mon, 06 Feb 2012 21:29:22 +0000

Price:$289.00 Special Price:$274.55

Wrangler 2.5" Suspension

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: Front and rear progressive coil springs, transfer case spacers to maintain factory driveshaft angles, and front and rear Performance 2.2 shocks - setting a new standard in shock design. Also available without shocks for $199.95 Description: This suspension lift is designed to give your Jeep TJ optimal on and off-road performance with up to a 32 tire. It offers a perfect balance for a daily driver that also desires great off-road performance. These ride quality and performance gains are delivered by our new progressive rate coil springs combined with our Performance 2.2 shocks.

Price:$349.95 Special Price:$299.95

2.5" X-Series Suspension

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: Front and rear progressive coil springs, front and rear upper and lower adjustable control arms with X-Flex joints, front quick disconnects, adjustable front track bar, rear track bar bracket, and front and rear Performance 2.2 shocks. Description: This suspension lift is designed to give your Jeep TJ optimal on and off-road performance with up to a 32 tire. It offers a perfect balance for a daily driver that also desires great off-road performance. These ride quality and performance gains are delivered by our new progressive rate coil springs combined with our Performance 2.2 shocks.

Price:$949.95

Dana 60 Axle King Pin

Mon, 06 Feb 2012 21:29:22 +0000

- Dana 60 Axle Lower King Pin - Bolts to Bottom of knuckle - Single Side Only

Dana 60 Lower King Pin (Trunnion) Bearing Cap. This fits all Ford, Chevy and Dodge front Dana 60 (D60) King Pin axles. Two per axle required for complete rebuild.

Price:$35.95

Dana 60 Axle King Pin Parts Number 37300

Mon, 06 Feb 2012 21:29:22 +0000

These extremely hard to find Closed Knuckle and King Pin parts are now available directly from Dana Spicer.

Price:$6.57

Dana 60 Axle King Pin Parts Number 37302

Mon, 06 Feb 2012 21:29:22 +0000

These extremely hard to find Closed Knuckle and King Pin parts are now available directly from Dana Spicer.

Price:$11.71

Dana 60 Axle King Pin Parts 620132

Mon, 06 Feb 2012 21:29:22 +0000

These extremely hard to find Closed Knuckle and King Pin parts are now available directly from Dana Spicer.

Price:$10.25

0.75" Leveling Suspension

Mon, 06 Feb 2012 21:29:22 +0000

Benefits: • Maintains factory ride quality. • 100% bolt-on installation. • Levels the front of the Jeep with the rear.

Price:$39.95 Special Price:$34.95

Wrangler 1.5" Suspension Lift

Mon, 06 Feb 2012 21:29:22 +0000

Benefits: • Clears up to 30" tires. • 100% bolt-on installation. • Increased ground clearance. Specs: • Part #: 650 H / N • Install Time: 1 - 3 hours • Wheel Backspacing: Factory • Recommended Tire Size: 30x9.50

Price:$199.95

South Bend Street Double Disc for Dodge 5-Speed

Mon, 06 Feb 2012 21:29:22 +0000

Diaphragm style pressure plate with light pedal pressure, 12 ceramic buttons per side of disc. 550-650 hp with ductile flywheel.

Price:$1,100.00 Special Price:$1,075.00

Diamond Eye 5" Muffler Delete 510220

Mon, 06 Feb 2012 21:29:22 +0000

THIS PIPE WILL NOT DELETE THE FACTORY MUFFLER, IT IS MEANT TO DELETE A STRAIGHT THROUGH MUFFLER FROM A PERFORMANCE 5" EXHAUST.

Price:$67.73 Special Price:$43.23

Diamond Eye '04.5-'07 DODGE 4" - MUFFLER REPLACEMENT KIT

Mon, 06 Feb 2012 21:29:22 +0000

PERFORMANCE DIESEL EXHAUST - OEM MUFFLER REPLACEMENT KIT

Price:$264.36 Special Price:$178.08

Diamond Eye '89-'93 DODGE 4" ALUM - TURBO BACK SINGLE

Mon, 06 Feb 2012 21:29:22 +0000

K4211A - 1989, 1990, 1991, 1992, 1993 - DODGE 5.9L CUMMINS DIESEL 2500/3500 (ALL CAB AND BED LENGTHS - 4x4 APPLICATIONS ONLY) - 4" ALUMINIZED - PERFORMANCE DIESEL EXHAUST KIT - TURBO BACK SINGLE

Price:$599.00 Special Price:$419.20

Bilstein Front Shocks Dodge 8 Lug 0-2" Lift 2003-2009 4x4

Mon, 06 Feb 2012 21:29:22 +0000

* Body: 2" Seamless Extruded Tube - Conventional Body * Rod: 14mm Centerless Ground, Case Hardened, Chromed and Super Polished (same as 7100 Series) * Seal: Aluminum 1 Piece Rod Guide * Piston: 46mm Bilstein Digressive Piston * Valving: "Self-Adjusting" Deflective Disc Independent Rebound & Compression * Oil: Bilstein Fade Resistant High Temperature Racing Oi * Finish: Zinc Plated * Mounting: Vulcanized Neoprene Rubber with Vehicle Specific Sleeves or Cast Crossbar * Boot: Black Bellows * Sold and Priced Individually

Part Number Front - 24-185776 Rear - 24-191203

Price:$82.00

Fox Emulsion 2.0 5/8th Shaft

Mon, 06 Feb 2012 21:29:22 +0000

BODY Smooth-bore seamless alloy body VALVING Tunable velocity-sensitive valving BEARINGS Teflon-lined heat-treated alloy steel spherical bearings SHAFTS - 5/8": Alloy steel, heat treated, hard chrome plated- 7/8": Stainless steel 17-4 H900, hard chrome plated BODY CAPS / EYELETS 6061-T6 billet aluminum with Blue or Black anodizing BODY PLATING Clear cadmium with clear coat (Chrome optional) MOUNTING - Emulsion shocks must be run body side up - Reservoir shocks can be run at any angle PRESSURIZATION Nitrogen gas pressurized to 200PSI SERVICE / TUNING Consumer serviceable / tunable

Part # Type Travel Ext. Length (in) Col. Length (in) Shaft (in) FOX-980-02-021-A Emulsion 5.0" 15.75" 10.65" 0.625" FOX-980-02-023-A Emulsion 6.5" 18.80" 12.30" 0.625" FOX-980-02-403-A Emulsion 8.0" 21.80" 13.80" 0.625" FOX-980-02-024-A Emulsion 8.5" 22.80" 14.30" 0.625" FOX-980-02-025-A Emulsion 10.0" 26.10" 16.10" 0.625" FOX-980-02-038-A Emulsion 11.0" 28.10" 17.10" 0.625" FOX-980-02-027-A Emulsion 12.0" 31.10" 19.10" 0.625" FOX-980-02-090-A Emulsion 14.0" 35.10" 21.10" 0.625"

Price:$150.00

Fox Remote Reservoir 2.0 5/8th Shaft

Mon, 06 Feb 2012 21:29:22 +0000

MODEL SPECIFICATIONS Shaft: 5/8" or 7/8" MOUNTING DIMENSIONS - 1/2" bolt diameter x 1 1/4" wide- Optional spacer 1/2" bolt diameter x 1 1/2" wide HOSES - 5/8" shaft: -5 x 12"- 7/8" shaft: -8 x 14" TRAVEL 5, 6.5, 8.5, 10, 11, 12, 14, 16

Part # Type Travel Ext. Length (in) Col. Length (in) Shaft (in) FOX-980-02-029-A Remote Reservoir 5.0" 15.75" 10.65" 0.625" FOX-980-02-030-A Remote Reservoir 6.5" 18.80" 12.30" 0.625" FOX-980-02-404-A Remote Reservoir 8.0" 21.80" 13.80" 0.625" FOX-980-02-031-A Remote Reservoir 8.5" 22.80" 14.30" 0.625" FOX-980-02-032-A Remote Reservoir 10.0" 26.10" 16.10" 0.625" FOX-980-02-039-A Remote Reservoir 11.0" 28.10" 17.10" 0.625" FOX-980-02-034-A Remote Reservoir 12.0" 31.10" 19.10" 0.625" FOX-980-02-035-A Remote Reservoir 14.0" 35.10" 21.10" 0.625"

Price:$210.00

AirDog 100 Duramax 2001-2010

Mon, 06 Feb 2012 21:29:22 +0000

The AirDog® Fuel Preporator®, with the capability to provide fuel at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates that could damage or jam the gearator fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. The fuel, now under positive pressure flow, enters the filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the POSITIVE FUEL AIR SEPARATION FEATURES of the PATENTED FUEL PREPORATOR® the separated air/vapor is discharged from the filter through the Primary Air/Vapor Discharge Port and into the return to tank passage after the regulator. The fuel passing through the filter media {free of contaminates & power robbing air/vapor and at pressures and flows to meet the needs of the engine} exits the fuel filter through two passageways. The fuel for the engine, passes into the fuel pickup tube and out to the engine. The excess fuel not needed by the engine is released through the pressure regulator to combine with the air/vapor and foam as it returns to the fuel tank. The regulator controls the fuel pressure to the engine.

Small & Compact: ONLY 7”L X 10”T X 3.2”W Dual Feed Gerotor Pump: Quiet, Efficient, Long Lasting! SINGLE PIECE PUMP BODY: Replaces the old 3 piece pump design reducing the number of parts, unit size, and weight. This results in a sleek, low profile pump assembly and eliminates the need for leaky, messy gaskets! “VACU” SEAL TECHNOLOGY: All PureFlow® pump system shaft seals operate under vacuum instead of pressure for extra long seal life. Mounts to frame - NO Drilling required!

Price:$629.00 Special Price:$499.00

AirDog 150 Duramax 2001-2010

Mon, 06 Feb 2012 21:29:22 +0000

Price:$659.00 Special Price:$499.00

AirDog II 165 w/Adjustable Regulator Duramax 2001-2010

Mon, 06 Feb 2012 21:29:22 +0000

The AirDog®II, designed to operate at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of water. The fuel passes through the water separator which removes the large particulate contaminates that could damage or jam The gerotor fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining enters the fuel pump. The fuel, under positive pressure flow, enters the fuel filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the POSITIVE FUEL AIR SEPARATION FEATURES of the PATENTED FUEL PREPORATOR® the separated air/vapor is discharged from the filter and back to the fuel tank through the Primary Air/Vapor Discharge Port. The fuel passing through the filter media, free of contaminates & power robbing air/vapor and at pressures and flows always able to meet the needs of the engine, exits the fuel filter through two passageways. First, the fuel for the engine, passes into the fuel pickup tube and on to the engine. Then. the excess fuel not needed by the engine recycles internally through the pressure regulator back to the water separator. Small & Compact: ONLY 7”L X 10”T X 3.2”W Dual Feed Gerotor Pump: Quiet, Efficient, Long Lasting! Dodge Cummins DF-200 Chevy DuraMax DF-200 DuraMax: Special Fittings for Quick and Easy Installations Ford PowerStroke AirDog®II High Pressure Systems Replaces OE Pressure Pumps! DF-130/75 Adjustable from 45 to 75psi DF-90/55 (55psi) DF-130/55 (55psi)

Price:$719.00 Special Price:$599.00

Quadzilla Adrenaline w/Control Pod

Mon, 06 Feb 2012 21:29:22 +0000

Meet the Adrenaline: the new standard in diesel performance for VP44 powered Cummins trucks. To start with, the Adrenaline is the MOST POWERFUL plug and play module out of the box found anywhere. With gains up to 180 rwhp* and 420 ft lbs of torque,* the Adrenaline stands alone. This power is made through a combination of CAN Bus fueling, Direct VP44 fueling control, injection timing and boost control. The heart of the Adrenaline module is a 32 bit processor. Quadzilla modules are the ONLY modules you will find these technologically superior processors in. Having this much processing horsepower lets us do things other modules only wish they could do. The Adrenaline uses extremely advanced 4 axis tuning maps to insure you have power on demand. Monitoring RPM, Throttle Position, Boost, and Load % all at the same time allows us to provide the smoothest, yet most aggressive, fueling curves found anywhere. Each Adrenaline module comes with the Adrenaline ControlPOD. This allows you to monitor EGT, Boost, and Transmission or Oil Temperature. All of the necessary parts to monitor the above mentioned parameters are included with each Adrenaline module! Fuel Economy While power is great, at today’s fuel prices, fuel economy is just as important. Realizing this we built in our industry first Max Mileage tuning into the Adrenaline. That’s right, you can have your cake and eat it too! With just a push of a button you can have the best fuel economy tuning available. Another push of the button will shred your tires and leave you short of breath. Where else can you find such versatility? Engine Protection We have always stated that power is nothing without Control. True to our word, not only is the Adrenaline the most powerful module available it is the SAFEST as well. At the heart of protecting your engine is our exclusive Guardian de-fueling software. Using the processing power we have at hand, we are able to precisely control your EGT’s without robbing you of all your new found power. In other words, you can maintain an EGT and still make tons of power. You will not find anything in the same league as the Guardian de-fueling software, guaranteed. We did not stop there. There are many small things we can do in order to help your engine and turbo live a long, happy life. We start this with our TurboGuard cooldown feature. This allows the user to turn the truck off and remove the key from the ignition while keeping the truck running. It is very important to allow your engine and your turbo to cool down before shutting it off. This allows the oil to continue to lubricate the engine and turbo while it is cooling off. The TurboGuard can be set for time or can be EGT based. Another exclusive feature to Quadzilla is the PowerIdle feature. This feature is simply a smart feature that knows when to raise the idle to allow for consistent engine temperature and proper engine lubrication during extended idle periods. This is also a handy feature for those cold mornings when you need your truck to warm up quickly and maintain engine temperature while at idle. User Interface With all of these options at hand, we had to give the user plenty of input. We could make you buy more expensive, add-on parts to get the full benefits from the Adrenaline but, we aren’t like those other guys. Instead, we developed yet another industry first: the FastFlash USB software. This software is installed on all Adrenaline modules and allows you to download an unlimited number of tuning and feature options. Maybe you don’t want a Turbo Timer or High Idle. Simply download your desired tuning as well as your desired features and load it into your Adrenaline in a matter of seconds. Never before has getting what you want been so easy. No need to send your module back to update it; those days are over! The Adrenaline has raised the bar in the industry of performance. With so many firsts and so many exclusive features, the Adrenaline is in a world of its own! Get your pulse pounding today with a Quadzilla Adrenaline module.

Price:$699.00 Special Price:$559.20

Quadzilla Adrenaline w/Pulse V2

Mon, 06 Feb 2012 21:29:22 +0000

Price:$899.00 Special Price:$650.00

GM Frame Brace 73-87

Mon, 06 Feb 2012 21:29:22 +0000

The GM frame support kit repairs cracks where the steering box mounts to the frame. Welding is Required!

Price:$79.95

ARB On-Board High Performance 12 Volt Air Compressor

Mon, 06 Feb 2012 21:29:22 +0000

Kit Includes: * Full assembled and bench tested air compressor * Complete wiring loom with Air Locker™ solenoid plug-in contacts * OEM quality compressor isolating switch * Air Locker™ supply rated pressure switch * Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge * Mounting hardware with reinforcing backing plate * Comprehensive photo illustrated installation guide Optional Accessories: * Full assembled and test air compressor * Complete wiring loom with Air Locker™ solenoid plug-in contacts * OEM quality compressor isolating switch * Air Locker™ supply rated pressure switch * * Relocatable splash resistant air filter with washable high-flow sintered bronze filter cartridge * Mounting hardware with reinforcing backing plate * Comprehensive photo illustrated installation guide Features: * Compact design makes it the highest flowing compressor in its class (voltage vs size) * Fully sealed components for moisture and dust * Pressure switch controlled air manifold systems specially designed to suit ARB Air Locker™ equipped vehicles * Hard anodized cylinder bore and PTFE (Teflon) impregnated carbon fiber piston seal for reduced friction and maximum trouble free life * New anodized mounting bracket dissipates motor heat and allows compressor to be repositioned 180° * Anti-vibration/sound deadening mount * Relocatable splash resistant air filter assembly for cleaner, cooler air supply and versatile waterproof air intake positioning * High density, high flow washable sintered bronze air filter element * Maxi-Fuse equipped for professional in-line circuit protection * Motor is 100% ball bearing equipped with unique linear brush pre-load system for extra long life, low heat and quiet operation * Compressor piston is equipped with a German made high shock rated cylindrical roller bearing * Constructed entirely of light weight, high strength engineering grade materials, including military and aerospace grade components * Over-pressure safety valve equipped * Motor is internally thermal protected against extreme temperature damage

Price:$273.10 Special Price:$219.00

Pro Comp Adjustable Drag Link

Mon, 06 Feb 2012 21:29:22 +0000

When lifted, the drag link attachment point needs to be moved down to reduce link angle, creating the need for a drop drag link.; Drag Link; Adjustable; 4 in. - 6 in. Drop; Steering correction

Price:$211.68 Special Price:$155.99

Cold Air Intake System Upgrades, Tubes Dodge Trucks- 03-07 L6-5.9L

Mon, 06 Feb 2012 21:29:22 +0000

Tube ugrade for older intakes. used with Stage 1 Intake System

Price:$98.75 Special Price:$79.00

BD Power Flex Plate 29.3SFI Approval Dodge 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

The power and torque that modified 5.9L and 6.7L Cummins engines deliver can crack or even shatter the stock flex plate. BD’s FleX-Plate is designed specifically for modified applications, and can reliably handle up to 1,500 lb.-ft. of torque. Twice as thick as the stock unit and made from forged steel, the BD FleX-Plate is precision-balanced and SFI-certified for use in race sanctioning bodies. Plus, a new black oxide coating resists corrosion, and prevents hydrogen embrittlement that can cause cracking. The BD FleX-Plate is a direct, bolt-in replacement for the stock converter and is also compatible with most aftermarket torque converters. Great for stock, towing or racing applications!

Price:$530.00 Special Price:$451.25

ATS Dodge Billet Flex Plate, 1994 - 2007 47/8-RH/E

Mon, 06 Feb 2012 21:29:22 +0000

ATS Billet Flexplates Features and Benefits: Fits stock and aftermarket converters Solves common breakage issues Meets SFI standards Strong, durable and reliable ATS Billet Flexplates are an excellent alternative to stock and other manufacturers' flexplates, solving the breakage issues so commonly found in stock applications. ATS Billet Flex Plates meet the SFI 29.1 standard, and come with a certification card for racing applications. Machined out of a solid piece of billet steel, the ATS Flex Plate is engineered and designed to replicate the factory ring-gear to ensure trouble free starts. Exclusive 12-bolt design allows for use with any stock or aftermarket torque converter (like the 5Star Torque Converter). The ATS Billet Flex Plate is the perfect upgrade for towing, street performance, sled pulling and racing applications.

Price:$525.00 Special Price:$498.75

ATS Dodge Billet Flexplate, 2008+ 68-RFE

Mon, 06 Feb 2012 21:29:22 +0000

Flex Plate, Cummins 2008+, 6.7L Diesel, Billet, Fits 68-RFE, SFI approved. ATS Billet Flexplates are an excellent alternative to stock and other manufacturers' flexplates, solving the breakage issues so commonly found in stock applications. ATS Billet Flex Plates meet the SFI 29.1 standard, and come with a certification card for racing applications. Machined out of a solid piece of billet steel, the ATS Flex Plate is engineered and designed to replicate the factory ring-gear to ensure trouble free starts. Exclusive 12-bolt design allows for use with any stock or aftermarket torque converter (like the 5Star Torque Converter). The ATS Billet Flex Plate is the perfect upgrade for towing, street performance, sled pulling and racing applications.

Price:$525.00 Special Price:$498.75

BD Power Flex Plate 29.3SFI Approval Dodge 5.9

Mon, 06 Feb 2012 21:29:22 +0000

Price:$530.00 Special Price:$451.25

ARB On-Board High Performance 12 Volt Air Compressor

Mon, 06 Feb 2012 21:29:22 +0000

Permanently mounted, this compressor is installed into your truck and includes a full wiring loom with air locker solenoid plug in contacts, mounting hardware with reinforcing bracket and quality compressor isolating switch. This compressor, with the addition of ARB pump-up kit (part #171302) can be used to activate air lockers, and can perform other functions such as inflating camping gear.

Price:$167.76

Industrial Injection PhatShaft Racing Compounds

Mon, 06 Feb 2012 21:29:22 +0000

The Phat Shaft racing twins feature the Silver Bullet as the primary turbocharger and a modified Big Brother as the secondary charger. The racing twins are a perfectly matched set of turbo's for over 1000HP

Price:$5,600.00 Special Price:$5,500.00

Industrial Injection New Style PhatShaft Towing Compounds

Mon, 06 Feb 2012 21:29:22 +0000

New Compound Turbo Kit for the 2003 - 2007 Dodge 5.9L Cummins. Kit works with the stock turbo and is compound with the proven BorgWarner S474. Supports 650hp, lowers EGT’s and improves fuel economy. Kit comes with a waste gate fooler if needed. Must have a programmer and/or a pressure box. (Not Included)

Price:$3,299.00 Special Price:$3,250.00

Pro Comp Fox Dual Stabilizer F-250, F-350, Excursion

Mon, 06 Feb 2012 21:29:22 +0000

Pro Comp is excited to announce the release of this new steering stabilizer system featuring high performance Fox Shox! This precision engineered system is specifically designed to improve the handling and control of the vehicle by reducing unwanted wheel vibration.

Price:$504.28 Special Price:$375.00

Industrial Injection PhatShaft Towing Compounds

Mon, 06 Feb 2012 21:29:22 +0000

PhatShaft towing compounds are built with a PhatShaft 62 as the primary charger with the K31 as the secondary charger. Both the primary and secondary turbo’s on the towing Compounds are wastegated for ultimate control of boost and back pressure. This unique combination offers quick spool up and unmatched towing capabilities.

Price:$5,100.00 Special Price:$5,000.00

1999-2004 4wd F250 Super Duty 8" Suspension

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: Front: 8" lifted leaf springs, track rod bracket, extreme duty track rod, extended sway bar links, pitman arm, extended steering coupler, stainless steel brake lines, and u-bolts. Rear: 8" lifted leaf springs, u-bolts, stainless steel brake line, and carrier bearing drop bracket. Shocks: Kit includes (4) Hydro 8000 shocks.

Price:$1,295.95

TeraFlex BellyUp Skid Plate

Mon, 06 Feb 2012 21:29:22 +0000

The BellyUp increases your ground clearance by up to 2-3/8" inches by replacing the factory skid plate with a lower-profile heavy duty skid plate. The BellyUp is manufactured with stronger and heavier materials than the stock plate to provide superior protection to your undercarriage. A one-inch body lift (Part #1948100) is recommended with Rubicon applications for proper transfer case clearance. Some exhaust adjustment may be necessary. Fits all TJ Wrangler models including the Rubicon and Unlimited. Note: This kit provides the maximum amount of ground clearance possible, but requires some fine tuning and adjustment to eliminate driveshaft vibration. Engine Spacer: This kit may require the use of a 5/8" engine spacer for proper fan shroud clearance when used with a 1" body lift. (Part #1948100) Short shaft kit: This kit will require the use of the TeraFlex short shaft kit (Part #4444400 or 4444401). Lowering kit: Because the BellyUP can make driveshaft angles severe, a lowering kit (Part #1900100 for a one-inch drop or Part #1900000 for 1/2" drop) will decrease the severity of that angle. This issue is common when the BellyUP is combined with an 4" suspension system.

Price:$464.99 Special Price:$428.95

SubZero Intercooler, Dodge, 2003 - 2008

Mon, 06 Feb 2012 21:29:22 +0000

The ATS SubZero Intercooler lowers the compressed air temperature from the turbo in your Dodge Cummins® diesel truck. This is an important upgrade if you use your vehicle for towing, but is also great if you just want to increase reliability, power and economy. Cooling the inlet air increases air density, maximizes engine performance, lowers firing pressures and minimizes stress on the engine.

Price:$1,395.00 Special Price:$1,325.25

BD Cool-It Intercooler - 2003-2008 Dodge 5.9L/6.7L

Mon, 06 Feb 2012 21:29:22 +0000

BD’s free flowing Charge Air Cooler (CAC) - or intercooler - design with streamlined external air passages improves engine cooling while offering less fan noise and less blade resistance, plus, improving engine power and efficiency of the radiator and air conditioning heat exchangers. Designed through testing at 100+ psi turbo boost pressure and 500oF turbo outlet temperatures, our extra thick cast end tanks with support struts have integrity and long life without ballooning and cracking.

Stuffed Tube designs are commonly used on stock applications with boost pressures of 20-40 psi and 200-300 OF inlet temperatures. The tubes have a thin wall and 82% heat conductivity transfer. Higher boost pressures and temperatures will cause breaking of fin-to-wall welds resulting in tubes ballooning and reduced heat transfer

Micro Extruded Tube design is for applications producing 20-100 psi of boost pressure and inlet temperatures of 500+OF. The tubes have a 0.025” wall thickness and designed enhanced inner fins that add to performance and already strong support structure resulting in a 95% heat conductivity transfer. No cracking or separation occurred when tested at over 400 psi.

Higher turbo boost pressures results in lower EGT’s. The lower the turbo boost pressure drop across the CAC (inlet vs. outlet) the higher the volume flow — the more volume of air that can fl ow through the CAC and the higher the turbo boost pressure will result in lower exhaust gas temperatures (EGT). BD’s Cool-It CAC’s are designed for performance diesel engines.

Price:$1,779.00 Special Price:$1,519.05

Banks Techni-Cooler System Dodge 6.7L 07-08

Mon, 06 Feb 2012 21:29:22 +0000

Superior to stock, everything about Banks Techni-Cooler Intercooler system is bigger. It includes mandrel-bent 3.5" high-flow boost tubes ... large, high-efficiency all-aluminum end tanks ... wide-open inlet and outlet with 31% bigger cross-sections ... and a 12% thicker core area with a major increase in volume. Techni-Cooler dramatically increases the cooling capacity by balancing the richer fuel mixture with greater airflow and cooler, denser air. Denser air has more oxygen, which improves combustion as well as engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT), better fuel economy and lower EGTs. That’s a truckload of benefits! Banks Techni-Cooler delivers the maximum reduction in boost air temperature with a minimal loss of boost pressure. It doesn’t get any cooler than Techni-Cooler! Mounting hardware included.

Price:$1,275.00

ATS ISBe Stage 1 Nozzle 04.5-07 p/n703-901-2290

Mon, 06 Feb 2012 21:29:22 +0000

Price:$199.93 Special Price:$189.93

ATS Injector Nozzle, Stage 2 +90 hp- '04.5-'07 Dodge 5.9L Common Rail

Mon, 06 Feb 2012 21:29:22 +0000

Price:$223.43 Special Price:$212.25

ATS Injector Nozzle, Stage 3 +120 hp - 2004.5-07 Dodge 5.9L Common Rail

Mon, 06 Feb 2012 21:29:22 +0000

Price:$235.21 Special Price:$223.44

PhatShaft 62 for the Dodge Cummins 12 Valve 1994 to 1998

Mon, 06 Feb 2012 21:29:22 +0000

The PhatShaft 62 is the perfect upgrade turbo for towing. The PhatShaft 62 for the 12 valve comes with the 12cm housing matched with a 65mm turbine. We suggest a 12 cm turbine housing if the truck has moderate fueling upgrades such as 300hp injectors and a camplate. If the truck has heavier fueling upgrades such as 370hp injectors, aggressive camplate and governor springs then you will be better suited with 14cm housing. The benefit of the 14cm exhaust housing is lower Exhaust Gas Temperatures but it will be slower to spool in daily driving situations. The wategate is set at 40psi to prevent head gasket failure. The PhatShaft 62 compliments moderate fueling upgrades and can support 300 - 550hp. The 62 is a drop in replacement however, a HX40 downpipe is required for instalation Note: The HX40 downpipe and clamp are required for installation....

Price:$1,550.00 Special Price:$1,500.00

Hypertech Max Energy ECON Power Programmer Cummins 6.7L 07-09

Mon, 06 Feb 2012 21:29:22 +0000

Features •The Hypertech E-CON optimizes your engine's tuning for maximum fuel efficiency •Discover additional savings with the read and clear feature - read diagnostic trouble codes and turn off "check engine" lights •Simple controls and prompts - only 4 buttons to push •Quickly return your vehicle back to the stock settings or change option settings at any time •Easy plug-and-play installation is ready to roll in less than 10 minutes •Equipped with a USB connector and cable for quick internet updates and new tunes •Emissions-certified for use in all 50 states •Your Hypertech E-CON Programmer is covered by Lifetime Warranty Hypertech's E-CON Programmer optimizes your engine's tuning for maximum fuel economy. Through a simple plug-and-play interface, the E-CON reprograms your engine's computer to squeeze more "go" out of every drop of fuel. What's more, the Hypertech E-CON saves you wasteful trips to the mechanic by letting you read and clear diagnostic trouble code (DTYCs) and turn off "check engine" lights. And, you can quickly return the vehicle back to stock settings whenever necessary. Plus, the E-CON programmer is easily updated via USB (cable included) and the internet for the latest innovations and enhancements. The Hypertech's E-CON is 50-state legal and available for both gasoline and diesel powered engines. With fuel prices on the rise, the Hypertech E-CON makes perfect economic sense. Backed by a Lifetime Warranty. Max Power Gains: •06-07 Duramax 6.6L +64HP +119TQ •01-05 Duramax 6.6L +94HP +155TQ •06-09 Powerstroke 6.0L&6.4L+80HP +131TQ •03-05 Powerstroke 6.0L +80 +131 •96-03 Powerstroke 7.3L +60 +113 •07-08 Cummins 6.7L +59 +130 •03-07 Cummins 5.9L +113 +185 •98.5-02 Cummins 5.9L +48 +174

Price:$435.49 Special Price:$329.99

Banks Ram-Air® Intake System Dodge 6.7 07-08

Mon, 06 Feb 2012 21:29:22 +0000

Testing, testing & more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks' density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Thanks to its enclosed cold-air housing, huge inlet, giant dome-shaped lifetime filter and streamlined design, Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. It flows 50% better than stock-and delivers greater air density to the turbo's inlet than the stock system and all competitors tested. Add on the optional Super-Scoop, and the results are even better! Longer service life, too. An aftermarket exclusive: with 4½" bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. It's all about density. And Banks Ram-Air Intake delivers. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy! Air density testing chart comparing on-highway temperatures of Banks Ram-Air® Intake, Bullydog, Airaid, AFE Stage I & II, True Flow XDI, Volant & AEM Brute Force vs. stock Chart comparing on-highway air density gain or loss of Banks Ram-Air® Intake, Bullydog, Airaid, AFE Stage I & II, True Flow XDI, Volant & AEM Brute Force vs. stock 6 Intakes Flunked Banks’ Density Test! Cold, high-pressure ram-air flowing through Banks Ram-Air® Intake with optional Super-Scoop® 6 out of 7 “cold air” systems provide LESS air density to the turbo inlet than the stock system! That sucks for our competitors, because air density is the key to better performance. MORE DENSITY = MORE MPG AND HP. It’s good to be dense, all right. Check out our density ad for an informative look at intake airflow, air temperature and air density, and how they all come together in the Banks Ram-Air Intake. Bankspower.com/density ad Testing so good, it’s patented! Banks sets uncompromisingly high standards for testing. In fact, we were awarded an Engine Performance Evaluation patent from the United States Patent and Trademark Office. Check it out: Engine Performance Evaluation: US Patent # 7,254,477 Overview Summary We measured each intake’s effect on air density at the turbo compressor inlet. Intake temperatures will generally be higher than ambient conditions, but the more the system can duct cool air to the filter and preserve the cool temperature as the air is ducted to the turbo, the higher the air density will be. In addition, there will commonly be a pressure drop as air travels through the filter and the ducting due to any restriction that is introduced. If the design of the system can minimize the restriction and the pressure loss, air density will be preserved. Test Setup A 2004 Dodge Ram 2500 4X4 Quad Cab Long Bed with the Cummins 5.9L engine and automatic transmission was used as the test vehicle. A data acquisition system was used to measure vehicle speed via GPS, along with multiple temperature thermistors and extremely accurate pressure transducers. The total vehicle weight was approximately 19,000 lbs. Tests were run in 2WD. Testing was conducted on a moderate hill on the northbound CA-57 in the city of Pomona. Speed was maintained at 45 MPH until the vehicle was adjacent to a pre-determined start point on the road. At that point, the accelerator was fully depressed and the vehicle was allowed to accelerate while climbing the hill. Test data was observed at the same vehicle speed in all cases, with the engine at 2800 RPM, the point of peak engine power. This data point occurred between 60 and 90 seconds into the run—sufficient time to allow the engine to reach a stabilized operating condition. Data Acquisition Vehicle Speed, Engine RPM and Accelerator Pedal Position were logged to determine the load conditions and speeds. Temperature was measured using thermistors for increased accuracy. They were mounted to measure ambient temperature as well as temperatures at the filter and compressor inlets. Pressure transducers were used to measure pressure in the same locations. The intake system effect on air density was evaluated by comparing the temperature and pressure of the ambient air condition with the temperature and pressure of the air at the turbo compressor inlet. All intake filtering systems will have some effect of diminished air density from ambient, including stock. The purpose of this evaluation is to compare this effect in relationship to the stock system. A replacement intake system is only valuable and effective if the intake air density percentage vs. ambient is greater than the air density percentage offered by the stock system. All data presented assumes an ambient temperature of 77°F and ambient pressure of 29.24 inches of mercury, per SAE standards. Test Results Stock Intake * Elevated ambient air temp 17.7° F * Lowered air pressure 6.8% * Combined result: air density 90.2% of ambient Banks Ram-Air Replaces the stock setup with new housing, filter with 7.5” outlet, lid & ducting system made of cross-linked polyethylene & polypropylene, all the way to the inlet of the turbo compressor. Inlet to filter housing is sealed to the fender air duct with open-cell foam. * Elevated ambient temp just 12.3° F * Air pressure 3.9% lower than ambient * Combined result: air density 93.9% of ambient Banks Ram-Air with optional Super-Scoop * Elevated ambient temp only 7.0° F * Air pressure only 2.8% lower * Combined result: air density 96.0% of ambient o The best temperature preservation of any of the 9 systems tested o Highest overall density of the 9 systems tested o Delivers enough density improvement over stock to increase the power output 28 more hp at the same EGT! AEM Brute Force Intake Replaces the stock setup with an aluminum tube, dry filter & a sheet metal heat shield. Filter has a 4” outlet which mates to the aluminum tube. * Elevated ambient temp 52.6° F (2nd highest increase of the group tested) o Could be attributed to the aluminum tube transferring underhood heat into the intake air * Lowered air pressure 1.8% * Combined result: air density 89.5% o 0.7% worse than stock o 6.5% worse than Ram-Air with Super-Scoop * Installation would result in a power loss AFE Stage I and Stage II Both systems use a filter with a 6” outlet. Stage I leaves the filter exposed with a sheet metal heat shield. * Elevated ambient temp 49.4° F * Lowered air pressure 2.7% * Combined result: air density 89.1% of ambient o 1.1% worse than stock o 6.9% worse than Banks * Installation would result in a power loss Stage II has a fully enclosed housing with an integrated forward-facing scoop. * Elevated ambient temp 27.9° F * Pressure 3.0% less than stock * Combined result: air density 92.2% of ambient * 2.0% better than stock * 3.8% worse than Banks Airaid Intake System Quick-fit system filter mounts to an adapter that mates to the factory inlet duct with a 3.75” inside diameter. * Elevated ambient temp 26.8° F * Lowered air pressure 5.5% * Combined result: air density 90.1% of ambient o 0.1% less than stock o 5.9% worse than Banks * Installation would result in a power loss Bullydog RFI Sheet metal enclosure with an opening toward the factory fenderwell opening. Filter is mated to a section of elbow tubing that mates to the factory bellows & silencer. * Elevated ambient temp 19.3° F * Lowered air pressure 8.3% (only system tested that produced a lower effective air pressure than the stock system) * Combined result: air density 88.5% of ambient o 1.7% worse than stock o 7.5% worse than Banks * Installation would result in a power loss Volant Cool Air Intake Oval-shaped filter housed in an enclosed box with three openings: one at the bottom, one toward the front & one toward the fender. * Despite website claims that Volant is the “only true cool air design,” it elevated the ambient temp by 50.5° F—among the highest of the systems tested! * Lowered air pressure 3.2% * Combined result: air density 88.2% of ambient o 2.0% less than stock o 7.8% worse than Banks * Installation would result in a power loss Bottom Line Why on earth would anyone pay money for a product that kills power and mileage? It’s all about density — and Banks Ram-Air delivers. Check It Out—Gale tells American Muscle Car how to get more cool air into your engine for better performance! bankspowertv.com/RamAir-part1 bankspowertv.com/RamAir-part2 Application Year Range Part # Ram-Air Intake System Dodge 6.7L 2007-08 42175 Banks Ram-Air filter (Banks housing) 2007-08 42178 Air filter oil, 8 oz. Banks Air Filters 90092 Air filter cleaner, 32 oz. Banks Air Filters 90093 Owners Manual(s) Intake- Ram-Air Intake System '07-08 (Part #96497) Tech_icon Download Ram-Air development Gale talks with SpeedTV about what went into developing the Ram-Air cold air intake system. (Note: Some components or designs shown may not be available for all applications.) Ram-Air with SuperScoop Ram more cold air into your engine with Banks Ram-Air intake system. Ram even more with the SuperScoop.

Price:$443.33 Special Price:$399.00

Dodge 6.7L Hypertech Max Energy

Mon, 06 Feb 2012 21:29:22 +0000

Max Energy™...The Best Handheld Performance Tuner On The Market! Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.

Adjustable Features * Speedometer\Odometer Correction For Tire Sizes 22.5 - 44 inches 1/4 inch increments * Top Speed Limiter 25 - 75 MPH in 5 MPH increments, 81 to 255 MPH to match speed rated tires * DTCs Read and Clear * Return Back To Stock * Internet Updateable

Performance Gains Stage 3: +85HP +181TQ Stage 2: +59HP +130TQ Stage 1: +26HP +66TQ

Price:$512.39 Special Price:$379.99

AEM Brute Force HD Intake Diesel 07-09 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

Price:$365.95

S&B Cold Air Intake Kit- '07-'09 Dodge Cummins 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

- Airflow Rating: Flows 48.2% Better than the Stock Intake - Efficiency Rating: 99.81% Efficient @ 653 CFM (ISO Course Dust) NOTE: Intake will not work with a remote start system due to an interference with the safety switch and the S&B air box.

Price:$289.00

BD-Power EGR Cooler Delete Kit 6.0L 03-07

Mon, 06 Feb 2012 21:29:22 +0000

Features & Benifits: * Eliminates the problem of sticky EGR valves. * Eliminates the troublesome expensive EGR cooler. * Eliminates the possibility of a blown head gaskets due to the EGR cooler leaking into the cylinder * Eliminates over pressurization of the coolant system. * Results in cooler engine water temperatures * Results in improved engine reliability. * Results in improved fuel mileage. * Results in lower EGTs/ more HP Why buy a BD kit * High quality stainless exhaust pipe. No flexible bellows to fail or burst. * High quality robot TIG welds * Billet Aluminum Blocker Plate * Innovative design ensures 100% seal on coolant tube * Viton Coolant tube Oring provide * Exhaust Feed Pipe Gasket Included * Aluminum Blocker Plate Gasket Included * Utilizes High Temperature Silicone Heater Hose and stainless steel clamps

Price:$350.95 Special Price:$327.50

aFe Cold Air Intake System Stage 2 Dodge Ram 2500/3500 Trucks- 03-10 L6-5.9L/6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

This Stage 2 cold air intake system produces 21 max horsepower, 53lbs. x ft. torque and out-flowed the factory intake by 80%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This intake is finished with a high luster black powdercoated top for an aggressive style.

Price:$395.95

aFe Cold Air Intake System Stage 2 Dodge Ram 2500/3500 Trucks- 03-10 L6-5.9L/6.7L (td) (Free Cleaning Kit)

Mon, 06 Feb 2012 21:29:22 +0000

Price:$407.95

SCT Touch Screen Xtreme Wireless Strategy Flash Tuner- '96-'08 Ford Gas/ Diesel

Mon, 06 Feb 2012 21:29:22 +0000

- 4" color touch screen display with automatic day / night modes - Stores up to 3 custom tune files created by your local SCT Custom Tuning Dealer - Internal rechargeable battery for complete wireless operation - Reads and clears diagnostic trouble codes quickly & easily - Expandable memory slot to easily increase the device storage space - Sturdy suction cup mount allows for easy adjustment & easy device mounting - Flashes & data logs vehicle using Bluetooth wireless technology - View & record your vehicles PCM data on the LCD screen or on your laptop - Performance Calculator displays estimated 1/4 Mile & 0-60MPH ET, Horsepower and Torque - Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears - User adjustable gauge layouts, color themes & more NOTE: This SCT device may NOT arrive with Preloaded Tune files specifically for your vehicle.

Price:$959.00 Special Price:$859.00

ATS Aurora 4000 Turbo Kit 1998.5-2002

Mon, 06 Feb 2012 21:29:22 +0000

How a Turbocharger works - Aurora 4000, 1998.5-2002 Dodge 5.9L 24-Valve Cummins The turbo charger is driven by heat from the expanding gasses that exit the engine's Exhaust Manifold which accelerats the turbine causing it to spin the compressor wheel. The compressor, which is nothing more than an air pump, creates boost which pressurizes the intake of the engine. The turbine in the turbo charger can spin at speeds in excess of 130,000 rpm! The increased airflow to the engine aids with the efficiency of the burn cycle and the end result is increased power output with lower exhaust gas temperatures. Understanding this you may say, why not increase the amount of fuel injected into the engine? If more fuel creates exhaust heat, which drives the compressor then more fuel will produce more boost increasing airflow making the engine more efficient and cooler, why stop? This is the area that can get a little complicated. The typical boost provided by a turbo charger is 18-25 psi. SInce normal atmospheric pressure is 14.7 psi at sea level, you can see that you are increasing the available air to the engine by more than 100 percent. That being the case, you would expect to at least double the power produced by the engine. That's not too far off. If you remove the turbo charger from your diesel engine, you will see the effect that it will have. You will loose almost all of the power the vehicle is capable of delivering. It's not uncommon for a naturally aspirated (non turbo charged) diesel engine to product a mere 120-130 horsepower. The turbo charger is a variable airflow system. As exhaust pressure is increased through the turbine side (Exhaust side) of the turbo charger, the backpressure increases along with it. As the backpressure in the exhaust manifold increases, air compresses causing heat. This backpressure keeps the exhaust trapped in the combustion chamber; the fresh cool air cannot be fed into the combustion chamber and so on. To make things worse, the intake and exhaust systems on these vehicles are usually very restrictive as well. There are a few external items that help with this condition. A few examples would be a larger exhaust or air filtration systems. The Turbo charger is feeding the intake side of the engine and the turbine section of the turbo charger is being fed (choked) by the exhaust side of the engine. The engines ability to make power is governed by the turbo chargers ability to move air. With stringent emission regulations small turbo chargers are selected for production Diesel applications. This is the primary reason behind the manufactures choice of factory turbo charger selection. Due to the small nature of the factory turbo the engine does not have the ability to flow much more air to produce increased power output.

Price:$1,795.00 Special Price:$1,705.95

ATS Aurora 4000 Turbo Kit 2003-2007

Mon, 06 Feb 2012 21:29:22 +0000

How a Turbocharger works - Aurora 4000 Turbo Kit The turbo charger is driven by heat from the expanding gasses that exit the engine's Exhaust Manifold which accelerats the turbine causing it to spin the compressor wheel. The compressor, which is nothing more than an air pump, creates boost which pressurizes the intake of the engine. The turbine in the turbo charger can spin at speeds in excess of 130,000 rpm! The increased airflow to the engine aids with the efficiency of the burn cycle and the end result is increased power output with lower exhaust gas temperatures. Understanding this you may say, why not increase the amount of fuel injected into the engine? If more fuel creates exhaust heat, which drives the compressor then more fuel will produce more boost increasing airflow making the engine more efficient and cooler, why stop? This is the area that can get a little complicated. The typical boost provided by a turbo charger is 18-25 psi. SInce normal atmospheric pressure is 14.7 psi at sea level, you can see that you are increasing the available air to the engine by more than 100 percent. That being the case, you would expect to at least double the power produced by the engine. That's not too far off. If you remove the turbo charger from your diesel engine, you will see the effect that it will have. You will loose almost all of the power the vehicle is capable of delivering. It's not uncommon for a naturally aspirated (non turbo charged) diesel engine to product a mere 120-130 horsepower. The turbo charger is a variable airflow system. As exhaust pressure is increased through the turbine side (Exhaust side) of the turbo charger, the backpressure increases along with it. As the backpressure in the exhaust manifold increases, air compresses causing heat. This backpressure keeps the exhaust trapped in the combustion chamber; the fresh cool air cannot be fed into the combustion chamber and so on. To make things worse, the intake and exhaust systems on these vehicles are usually very restrictive as well. There are a few external items that help with this condition. A few examples would be a larger exhaust or air filtration systems. The Turbo charger is feeding the intake side of the engine and the turbine section of the turbo charger is being fed (choked) by the exhaust side of the engine. The engines ability to make power is governed by the turbo chargers ability to move air. With stringent emission regulations small turbo chargers are selected for production Diesel applications. This is the primary reason behind the manufactures choice of factory turbo charger selection. Due to the small nature of the factory turbo the engine does not have the ability to flow much more air to produce increased power output.

Price:$1,795.00 Special Price:$1,705.95

ATS Aurora 3000 Turbo Kit 2003-2007

Mon, 06 Feb 2012 21:29:22 +0000

How a Turbocharger works - Aurora 3000 Turbo System - 2003+ Dodge 5.9L Cummins The turbo charger is driven by heat from the expanding gasses that exit the engine's Exhaust Manifold which accelerats the turbine causing it to spin the compressor wheel. The compressor, which is nothing more than an air pump, creates boost which pressurizes the intake of the engine. The turbine in the turbo charger can spin at speeds in excess of 130,000 rpm! The increased airflow to the engine aids with the efficiency of the burn cycle and the end result is increased power output with lower exhaust gas temperatures. Understanding this you may say, why not increase the amount of fuel injected into the engine? If more fuel creates exhaust heat, which drives the compressor then more fuel will produce more boost increasing airflow making the engine more efficient and cooler, why stop? This is the area that can get a little complicated. The typical boost provided by a turbo charger is 18-25 psi. SInce normal atmospheric pressure is 14.7 psi at sea level, you can see that you are increasing the available air to the engine by more than 100 percent. That being the case, you would expect to at least double the power produced by the engine. That's not too far off. If you remove the turbo charger from your diesel engine, you will see the effect that it will have. You will loose almost all of the power the vehicle is capable of delivering. It's not uncommon for a naturally aspirated (non turbo charged) diesel engine to product a mere 120-130 horsepower. The turbo charger is a variable airflow system. As exhaust pressure is increased through the turbine side (Exhaust side) of the turbo charger, the backpressure increases along with it. As the backpressure in the exhaust manifold increases, air compresses causing heat. This backpressure keeps the exhaust trapped in the combustion chamber; the fresh cool air cannot be fed into the combustion chamber and so on. To make things worse, the intake and exhaust systems on these vehicles are usually very restrictive as well. There are a few external items that help with this condition. A few examples would be a larger exhaust or air filtration systems. The Turbo charger is feeding the intake side of the engine and the turbine section of the turbo charger is being fed (choked) by the exhaust side of the engine. The engines ability to make power is governed by the turbo chargers ability to move air. With stringent emission regulations small turbo chargers are selected for production Diesel applications. This is the primary reason behind the manufactures choice of factory turbo charger selection. Due to the small nature of the factory turbo the engine does not have the ability to flow much more air to produce increased power output.

Price:$1,568.00 Special Price:$1,489.60

Poison Spyder Steering Box Skids

Mon, 06 Feb 2012 21:29:22 +0000

The Poison Spyder Steering Box Skid fully protects one of your Jeep's most vulnerable and vital components. The skid is CNC laser cut from 3/16" high pressure steel plate, then precision brake-formed and professionally MIG welded. This rugged skid plate is able to withstand punishing impacts. The Steering Box Skid comes powder coated satin black for great looks and corrosion resistance. The kit comes complete with all additional mounting hardware (some OEM hardware is re-used).

Price:$53.95

ATS Arc Flow Intake Dodge Common Rail 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

The smooth, non-restrictive airflow design of the ATS ArcFlow increases intake efficiency, air velocity and eliminates air turbulence. That means you get increased throttle response, horsepower, torque and fuel economy for your Dodge Cummins®. The ATS ArcFlow's smooth, non restrictive air flow design increases intake efficiency, air velocity and eliminates air turbulence, increasing throttle response, horsepower, torque and fuel economy. The Arc Flow has been dyno tested, verses the stock air intake, and has proven to provide gains of up to 19 horsepower and 57 foot pounds of torque. The shrouded backside of ArcFlow and top intake section have been pre-tapped for easy, clean, gauge, water injection (like the ATS Water Boy system) and Nitrous injection installation. The ArcFlow is the easiest, most economical way to "bolt on" horsepower and performance and is ideal when upgrading your truck because it will not void your factory warranty. The ATS ArcFlow is NOT compatible with Dodge's '94 thru '98 anti-lock brake system (Hydroboost Brake Applications), or California trucks equipped with an EGR system. ATS' Product Warranty does not apply should a customer use these two systems together, and ATS is not liable for any potential product failure. Please contact ATS' sales department with any further questions.** Features and Benefits Include: - Lower exhaust gas temperatures - Better throttle response - Superior Arc-flow design increases intake efficiency and air velocity over that of a stock intake manifold with much greater internal cross section. - Ideal when upgrading your turbo. - Shrouded back side of intake is pre-tapped for easy and clean gauge installation and other auxiliary inputs. - Will not void warranty. - Pre-tapped for water injection directly above the intake plenum. The use of an ATS PulseFlow Manifold is recommended with the ATS Intake Manifold. - Ideal for upgrading your truck; it's the easiest, most economical way to "bolt on" horsepower and performance.

Price:$295.00 Special Price:$280.95

SpiderTrax Offroad Wheel spacers 5 on 4.5

Mon, 06 Feb 2012 21:29:22 +0000

These 1.25" thick, 5 on 4.5", 6061T6 aluminum spacers are an easy way of spacing out front and rear Jeep XJ, YJ, TJ, ZJ, KJ and KK axles. Each kit comes with 2 wheel spacers, 10 standard wheel studs (pre-installed), 10 lugnuts, and Loctite. The wheel spacers are anodized in dark blue, which is a double anodizing process for twice the corrosion resistance. In addition, each wheel spacer is wheel and hub centric for a perfect fit. Proudly made in the USA.

Price:$99.95

SpiderTrax Offroad Wheel Spacers 5 on 5.5

Mon, 06 Feb 2012 21:29:22 +0000

These 1.25" thick, 5 on 5.5" 6061T6 aluminum spacers are an easy way of spacing out front and rear Jeep CJ axles. Each kit comes with 2 wheel spacers, 10 standard wheel studs (pre-installed), 10 lugnuts, and Loctite. The wheel spacers are anodized in dark blue, which is a double anodizing process for twice the corrosion resistance. Proudly made in the USA.

Price:$99.95

Sky Manufacturing Rear Shackle Flip- '73-'88 Chevy/ GMC 1/2-3/4 ton

Mon, 06 Feb 2012 21:29:22 +0000

- Includes all hardware to mount, 12 7/16ths bolts nuts and flat washers - Easy installation using factory rivet locations - Fits 1/2 and 3/4 ton trucks only at this time - Compare our design to others, they are not even close. These weight almost 30 pounds a pr! - Extreme duty 1/4 and 3/16ths steel. - Laser cut, CNC formed, Mig welded - 100% USA made materials and labor, no cheap off shore steel here! - 4" lift, using stock length shackle

Price:$159.95

Sky Manufacturing Rear Shackle Flip Kit- '67-'73 Chevy/ GMC

Mon, 06 Feb 2012 21:29:22 +0000

- Kit adds 4 inch's of lift - May require exhaust modification - Relieves the need for lift blocks up to 4 inch's - Kit includes 2 hangers and hardware

Price:$150.00

Sky Manufacturing Corporate 14 Bolt Disc Brake Conversion

Mon, 06 Feb 2012 21:29:22 +0000

- Allows the end user to install disk brakes on their Corporate 14 Bolt rear axle - Rotors, calipers, and brake lines not included. (Recommended: Calipers from a 73+ Chevy 3/4 ton, and rotors from a 4wd 73+ Chevy truck.)

Price:$95.00 Special Price:$85.00

Sky Manufacturing Dana 44 Crossover and High Steering Kit

Mon, 06 Feb 2012 21:29:22 +0000

- Available in Crossover and Full High Steer - Crossover kit includes: Draglink, Tierod ends, Jamnuts, Pitman arm, Passenger Side Steering arm, Steering arm install kit. - Full High Steer includes all of above plus: Tierod, Tierod ends, Jamnuts, Driver Side Steering am, Steering arm install kit. NOTE: Body lift does not affect lift in options above. Please only specify suspension lift!

Price:$375.00 Special Price:$365.00

DP MotorSports 1994-2012 Rear Traction Bars

Mon, 06 Feb 2012 21:29:22 +0000

Axle wrap is a common problem on lifted or high horsepower motors. DP Traction Bars completely eliminate this problem. Laser cut brackets fit axle and frame perfect. These are a must for anyone towing with a lift or high horsepower. THIS IS A WELD ON KIT.

Price:$349.00 Special Price:$275.00

Rough Country Jeep TJ Adjustable Front Track Bar 4"-6- Lift

Mon, 06 Feb 2012 21:29:22 +0000

Notes: • Fits 97-06 Jeep TJ Only. • Requires drop pitman arm. Benefits: • Built from Heavy Duty DOM tubing. • Works from 4" - 6" of suspension installed. Specs: • Part #: 1085 • Install Time: 2 - 3 hours

Price:$149.95

Jeep TJ Adjustable Front Track Bar 0-3.5" of LIft

Mon, 06 Feb 2012 21:29:22 +0000

Notes: • Fits 97-06 Jeep TJ Only. • Fits Dana 30 axle Only. Benefits: • Built from Heavy Duty DOM tubing. • Works from 0" - 3.5" of suspension installed. Specs: • Part #: 1083 • Install Time: 2 - 3 hours

Price:$129.95

Jeep TJ Adjustable Rear Track Bar

Mon, 06 Feb 2012 21:29:22 +0000

Notes: • Fits 97-06 Jeep TJ Only. Benefits: • Built from Heavy Duty DOM tubing. • Works from stock - 6" of suspension installed. Specs: • Part #: 1086

Price:$119.95

Rough Country Jeep TJ 1¼" Body Lift

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: (11) Fiberglass reinforced nylon body pucks, shift control bracket, grill bumpstops, and grade 8 hardware. Description: The 1.25 TJ Body Lift by Rough Country is the most complete and economical solution to tire clearance problems that does not affect the center of gravity, the spring rate or the steering geometry of the TJ. This Rough Country Body Lift provides a full 1.25" of additional tire clearance, as opposed to the standard 1" provided by most other manufacturers. The 1.25 body lift can be used to gain needed clearance for high clearance skid plates (tummy tucks). It requires no modifications to the fuel tank, air conditioning, radiator, and brakes.

Price:$129.95 Special Price:$99.95

Rough Country Jeep 1" Motor Mount Lift Kit

Mon, 06 Feb 2012 21:29:22 +0000

Kit Contents: (2) Aluminum motor mount spacers, (2) couplers, (2) 10mm x 60mm bolts & washers. Description: This kit is the Perfect addition to any Jeep with a 1" - 3" body lift or for those installing a belly up pan. These 1" spacers tip the rear of the transfer case down slightly, correcting pinion angle.

Price:$74.95 Special Price:$54.95

ANTIROCK® FRONT SWAY BAR KIT FOR '97-'06 TJ AND UNLIMITED

Mon, 06 Feb 2012 21:29:22 +0000

The Currie Antirock® Sway Bar provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Antirock® Off-Road sway bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition. This kit includes all components, bushing, hardware and step by step instructions. It is positioned through the front cross member and attaches to the stock mounts on the axle housing on the Jeep TJ's and LJ's. The Currie Antirock® Sway Bar does not need to be disconnected for off-road use. Jeeps will have more body roll than stock. This Sway Bar may be used on the street, however it will not provide the same performance as the stock setup.

Price:$339.95

ANTIROCK® FRONT SWAY BAR KIT WITH ALUMINUM ARM OPTION FOR '97-'06 TJ AND UNLIMITED

Mon, 06 Feb 2012 21:29:22 +0000

For 1997-2006 Jeep TJ's and Unlimited's. The Currie Antirock® Sway Bar Kit with aluminum arm option provides balanced performance of front and rear suspension for rugged off-road conditions as well as a light weight, trick looking aluminum arms. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock® Off Road Sway Bar is designed to directly replace the stock Jeep sway bar and is an easy bolt on installation. The sway bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition sway bars. The Currie Antirock® Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup.

Price:$399.95

TJ/LJ BOLT ON REAR ANTIROCK® SWAY BAR KIT

Mon, 06 Feb 2012 21:29:22 +0000

This is the complete TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. Kit includes the 44" sway bar, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel. Sold as a kit.

Price:$399.95

84-01 Jeep XJ Cherokee and 86-92 MJ Comanche

Mon, 06 Feb 2012 21:29:22 +0000

This is the bolt on front Antirock® sway bar kit for the '87-'01 Jeep XJ Cherokee and '86-'92 Jeep Comanche pick ups. Kit includes semi-gloss black powdercoated billet aluminum brackets, splined torsion style sway bar, arms, adjustable length heim jointed links, and all mounting hardware. Sold as a kit.

Price:$439.95

CURRECTLYNC® - TJ/LJ/XJ/MJ HEAVY DUTY TIE ROD SYSTEM

Mon, 06 Feb 2012 21:29:22 +0000

The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1 ¼" diameter forged alloy drag link, and 1 ¼" solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components.

Price:$399.95

YJ/TJ/LJ 1" BODY LIFT

Mon, 06 Feb 2012 21:29:22 +0000

1" body lift for 1987-2006 Jeep YJ and TJ Wranglers, as well as LJ Unlimiteds allows for additional tall tire clearance without exceeding practical suspension lift heights. The Currie billet aluminum body lift pucks are concave on the bottom side to allow the retention of the stock rubber body mounting pucks. This keeps the body isolated from the frame just like stock, so that no more noise or vibration will be transferred to the cab of the vehicle than would be stock. The aluminum pucks are powder coated black for durability, and all of the necessary new longer grade 8 body bolts are included in the kit. We highly recommend the use of the 1" raised heavy duty motor mount kit in conjunction with this body lift to keep all of your underhood and linkage pieces in line with the body where they belong. On a vehicle with a 4" lift and 33" tires, you can install the body lift and motor mount lift and efficiently clear 35" tires.

Price:$109.95

Jeep Aluminum Wheel Spacers

Mon, 06 Feb 2012 21:29:22 +0000

These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Features safety graded studs and matching nuts for proper fit. Spacers are 1.25" and 1.5" thick. Made from Billet 6061-T6 aluminum. Grade 8 Studs, Grade 10.9 nuts. Only high quality nuts and studs that are hardness graded and stamped are used. Spacers feature precision machined surfaces for proper fit and contact with wheels and hubs.

Price:$79.00

JEEP TJ WRANGLER 97-06 3" LIFT KIT, CAMOUFLAGE, SCORPION SHOCK ABSORBERS INCLUDED

Mon, 06 Feb 2012 21:29:22 +0000

Daystar Lift Kits combine the same proven technology found in our Leveling Kits but with the addition of rear lift. Daystar was the first to enter the Leveling Kit market in 1995. Though there have been many companies that have entered the market since, Daystar's Lift & Leveling Kits offer many advantages that the others can not claim: * No Metal-On-Metal Contact - Daystar uses Polyurethane material in its Leveling Kits for a reason: It's an insulator. It absorbs the Noise, Vibration, and Harmonics (NVH) that come from the suspension and avoids transmitting them to the passenger compartment. All competitors use steel or aluminum in their Leveling Kits. If you were to take apart any factory suspension, you are going to find rubber, polyurethane, and often both in a typical suspension. These pieces are there for a reason; they absorb the NVH. Sure, steel makes a great hammer, but would you want to ride on it? * Lifetime Warranty - All of Daystar's Lift & Leveling Kits are backed by a Lifetime Warranty. Basically, in the unlikely event you experience a problem with a Daystar product, we'll take care of it. * Made in the USA - All of our Lift & Leveling kits are manufactured at our plant located in Phoenix, Arizona. Most other Leveling Kits are manufactured overseas. In-house manufacturing ensures a level of quality control that no one else can match....and we have the ISO9001 certification to prove it. * Top-Mount Easy-Install Design - Most late-model vehicles have gone to a strut type of front suspension. Most of Daystar's applications are a Top-Mount design, meaning that our components bolt to the top of the factory strut assembly. This type of leveling kit does not preload the factory coil spring, so factory ride quality is maintained, and installation requires only simple hand tools. Daystar Lift Kits work within the factory suspension design, meaning that we work within the factory's design parameters to achieve an increase in ride height. Because we work within the factory design, there are not a bunch additional modifications involved that adds complexity and expense to the kit. Everything needed is included in the kit; there's everything you need and nothing you don't. If there are extra items required, such as longer shocks, it's clearly stated in the application description. Daystar Lift Kits provide both front and rear lift in the 2" to 3" range. Front lift is generally the same as with our leveling kits, while rear lift comes in the form of rear coil spring spacers, longer shackles, add-a-leafs, or a block and U-bolt kit. Which method used is spelled out in the application description. Daystar's Lift Kits are the perfect solution for gaining ground clearance and the room to step up a few tire sizes...Do your homework and you'll see that we've done ours!

Price:$489.95

TJ/LJ/XJ/MJ JOHNNY JOINT® FRONT ADJUSTABLE TRAC BAR

Mon, 06 Feb 2012 21:29:22 +0000

This component replaces the stock trac bar on 97-2006 Jeep TJ's and Unlimited's, as well XJ and MJ. The Johnny Joint® Trac Arm is designed to center the front axle assembly under the vehicle after installation of a lift kit and/or the springs settle. It is adjustable in length made from 1 1/4" heavy wall D.O.M. tubing. It uses a 2 1/2" Johnny Joint® at the frame end, and features a heavy duty bushing at the housing end. Comes complete with zerk fitted grade 8 hardware and instructions for lifted TJs.

Price:$229.95

ARB Air Locker Dana 30 27 Spline 3.73 & Up

Mon, 06 Feb 2012 21:29:22 +0000

Air locker locking differentials allow you to tackle the toughest terrain. The world's premier traction aid, ARB air lockers keep you moving in all conditions. A complete air locker kit: replacement differential, activation switch, solenoid valve, air line and bulkhead fittings. Please note: Not all units are supplied with replacement carrier bearings.

Price:$955.95

ARB Air Locker Dana 35 27 Spline 3.54 & Up

Mon, 06 Feb 2012 21:29:22 +0000

Price:$955.95

ARB Air Locker Dana 30 30 Spline 3.73 & Up

Mon, 06 Feb 2012 21:29:22 +0000

Price:$955.95

K&N Lifetime Air Filter F-250-F550 6.4L

Mon, 06 Feb 2012 21:29:22 +0000

K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.

Price:$89.95

DP 4" Turbo Back Aluminized Exhaust 2003-2004 Cummins 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

4" Mandrel bent aluminized exhaust from turbo back. Includes clamps and muffler for an easy install. The ideal budget exhaust system!

Price:$269.00

DP 4" Turbo Back Aluminized Exhaust 04.5-07 5.9L Cummins

Mon, 06 Feb 2012 21:29:22 +0000

4" Mandrel bent aluminized exhaust from turbo back. Includes clamps and muffler for an easy install. The ideal budget exhaust system!

Price:$269.00

FASS DDRP replacement Pump 98.5-04

Mon, 06 Feb 2012 21:29:22 +0000

The Direct Dodge Replacement fuel pump better known as the DDRP, will replace the Dodge 1998.5-2002 Factory fuel pump. Now you have the dependability of FASS brands without the cost of a full system. With a 4 year warranty. Your new DDRP will have a high torque to gear ration to ensure extreme cold weather starts. These pumps are intended for stock unmodified engines. Should not be used with veg oil.

Price:$275.95

aFe Stage 2 Cold Air Intake System Type XP

Mon, 06 Feb 2012 21:29:22 +0000

This Stage 2 cold air intake system produces 21 max horsepower, 53 lbs. x ft. torque at 2000 RPM and out-flowed the factory intake by 80%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This intake is finished with a high luster black powdercoated top for an aggressive style.

Price:$385.00

aFe Cold Air Intake System Stage 2 Ram 5.9L & 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

Price:$425.00 Special Price:$405.00

aFe Cold Air Intake System Stage 2 Si 03-07 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

This air intake system produces 4 max horsepower, 9lbs. x ft. torque and out-flowed the factory intake by 60%.Fully enclosed in a heat-shielding molded plastic housing; this air intake system features a washable/reusable conical air filter. The housing features auxiliary inlet duct for better airflow as well as an attractive brushed aluminum cover that provides ready access to the filter for servicing. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Price:$347.00

aFe Stage 2 Cold Air Intake System Type

Mon, 06 Feb 2012 21:29:22 +0000

This air intake system produces 18 max horsepower, 24lbs. x ft. torque and out-flowed the factory intake by 117%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Price:$275.00

FASS System HD series

Mon, 06 Feb 2012 21:29:22 +0000

FASS Stands for Fuel Air Separation System * Removes AIR / Vapor from Your Fuel * Consistent Flow of Fuel * Reliable High Volume Pumps * Increase Horse Power * Increase Torque * Increase Fuel Economy * Reduces Carbon Monoxide & Carbon Dioxide * Lifetime Warranty* on Most Applications * 13,000 - 15,000 Hour Life Expectancy * That Equates to 500,000 Plus Miles * Up to 200 GPH * 160 Maximum PSI * Motor Has Up to 406 OZ Inches of Stall Torque * Interchangeable Filters Warranty cards must be filled out and returned to the manufacturer within 30 days of purchase.

DUNKS PERFORMANCE IS AN AUTHORIZED FASS DEALER!

Price:$673.55

FASS Titanium Series - Dodge

Mon, 06 Feb 2012 21:29:22 +0000

DUNKS PERFORMANCE IS AN AUTHORIZED FASS DEALER!

Price:$578.55

MADS Smarty Junior SJ-06 Programmer- '03-'07 Cummins 5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- CaTCHER'S software is inside - Three different performance levels: 40/ 70/ 100 hp - Improved fuel economy - Optimized drivability - Fastest download in the industry, up to three times faster than the competition (a typical ECM update takes about 3.5 - 5 minutes, depending on truck model) - ABS tire height updates in just seconds from 22.5" - 44" - Not traceable in the stock setting- Smarty leaves no footprint - Manual high-idle is is enabled in all software - Reads Diagnostic Trouble Codes plain text - No tools required, no fuses to pull - USB built in for simple updates from the internet - Easy installation - Reliable- works off your OEM hardware - Now with Power on Demand function!!!

Price:$495.00

BD-Power Super "B" SPECIAL Single Turbo 5.9L 03-07

Mon, 06 Feb 2012 21:29:22 +0000

In a joint engineering effort between BD Diesel Performance and BorgWarner Turbo Systems’ AirWerks, turbo systems for the 5.9L Cummins engine were developed. For a performance “single” replacement, we wanted a turbo that had an air flow range that meets the air demand for stock engines and engines with up to 150 hp modifications. It also had to be responsive and durable enough for street and heavy towing applications and for mild race track applications. Plus, it had to be backed by a one year factory warranty! With these criteria, the BD Super B Turbo series was created. Featuring BorgWarner’s unique Extended Tip compressor wheel technology and low inertia, full-floating journal bearings, these turbos utilize a dual-volute turbine housing which utilizes low rpm exhaust pulses for improved turbine response, and works great with BD's pulse tuned exhaust manifold. The dual-action waste gate bleeds off turbine drive pressure from both volutes if excessive boost temperatures are experienced. BD's turbo kits also feature a heavy-duty waste gate actuator that prevents pre-mature opening caused by high exhaust turbo drive pressure. You can even fine-tune your BD/AirWerks turbo boost for higher boost if your fueling adjustments exceed 1200 F or barometric pressure changes if operating at high altitude using BD’s adjustable waste gate control Turn Buckle. Put simply, you'll get better economy, more usable power, quicker response, cooler EGT’s and lower exhaust emissions with a BD/AirWerks turbocharger! And, you’ll have the added benefit of proven journal bearing technology – the very same used in 99% of the turbochargers produced in the world since 1921.

Price:$1,710.00

BD-Power Super "B" Twin Turbo Kit 5.9L 03-07

Mon, 06 Feb 2012 21:29:22 +0000

Boosting your Cummins 5.9L beyond 450 rwhp Rear Wheel Horse Power and keeping the working exhaust temperatures around the 1200 degrees F and at the same time keeping your truck street friendly can be a challenge. BD’s Twin Turbo kits are up for the challenge! For the Dodge truck owner who has his 5.9L diesel pushing between 425hp-575hp and yet wants to use his pick-up for daily driving, full-time RV’ing, weekend adventures or a little fun on the track, plus, keep the EGT’s low and economy high, then BD’s Super B Twin kits are the perfect fit. The Super B Twin uses a large Borg Warner Air Werks turbo as the primary which feeds the Super B Single we use as the secondary, compounding the air flow to deliver up to and beyond 60psi of superior boost pressure. The secondary turbo comes with BD’s own heavy duty waste gate kit and Turnbuckle for consistent pressure without “creep” and ease of adjustment. Included in the Super B Twin Turbo kits are our X-Intake system with a twin turbo air flow matched conical washable Green air filter, casted and machine matched turbine connection, powder coated mandrel formed intake pipes, oil return and supply fittings – some kits even include our pulse tuned exhaust manifold. Most kits allow the stock engine oil cooler to be left in place. For those Dodge owners who already have a Super B Single turbo and have increased their power or are having difficulty keeping the EGT’s low, we have upgrade kits to take your single to a twin. Do you have specialized Borg Warner S300 and S400 turbos that you want to try on your truck but are lacking the installation hardware? We have twin piping kits that include everything but the turbos! Does your application call for special attention? Our engineering division has the expertise to guide and supply you what you need. BD's R700, R850 and R1000 turbo kits contain custom Borg Warner S300 and S400 turbochargers that are designed for engines operating above stock engine RPM and more than 700 HP. Please call in with your engine specifics so we can supply the proper combinations for your application. We recommend that applications with twin turbos utilize one of our Cool-It Intercoolers – only BD Charge Air Coolers are designed to handle the flow and boost pressure created with these fueling and turbo combinations. We suggest tuning your fueling program to not exceed 1200 degrees f when working your engine hard with whatever turbo combination you have. Adjusting your waste gate closed for higher boost pressure provides more air and cooler exhaust gas temperatures. Extreme high exhaust gas temperatures will cause head gasket problems among many other problems. Turbos need exhaust temperatures to develop boost but temperatures above 1200 F reflect not enough air for the amount of fuel injected. Stock intake filters will not handle twin turbo air needs.

Price:$4,650.95

BD-Power Super "B" Single Dodge Turbo 5.9L 03-04

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,334.95

BD-Power Super "B" Single Turbo 5.9L 04.5-07

Mon, 06 Feb 2012 21:29:22 +0000

Price:$1,615.00

BD-Power Performance Dodge Steering Stabilizer Ram (94-11)

Mon, 06 Feb 2012 21:29:22 +0000

BD's new Steering Box Stabilizer (SBS) eliminates steering wander and wobble caused by excessive shaft play in the steering box of late-model Dodge trucks. Designed for easy, bolt-in installation in about 10 minutes, the SBS virtually eliminates frame flex at the steering box mounting point, resulting in more positive steering feel. The BD SBS is black powder coated for corrosion resistance, and features a greasable, high-quality bearing for reliable operation. The SBS comes complete with high-strength mounting hardware and instructions.

Price:$232.95

BD-Power Adjustable Track Bar Kit

Mon, 06 Feb 2012 21:29:22 +0000

Powder coated Adjustable Track Bar is built from rigid 1 3/8” DOM (Drawn Over Mandrel) seamless heavy wall 0.313” tubing with formed and precision welded collars that have durable, heavy duty Poly bushings. With the OEM ball joint design, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble” - BD’s Track Bar is the perfect solution for steering stability and is a great compliment to BD’s Steering Box Stabilizer. Plus, it is adjustable to accommodate up to 3-4” lifts!

Price:$342.95

Raptor 150 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

HIGH END Gerotor Fuel Pump Featuring: • A Built in ADJUSTABLE REGULATOR; No Return Line Needed. • Single Piece Pump Body reduces number of parts, size and weight, NO leaky, messy gaskets! • Flow Rates of 100 GPH and 150 GPH. • ‘VacU’ Seal Technology puts Shaft Seals Under Vacuum Instead Of Pressure for Long Life. • Wire Screen in the Inlet Port for Added Protection. • Includes a complete Installation Kit With: No Drill Mounting Bracket, Wiring Harness, AND 1/2” Big Line Fuel Lines are Standard. • LIMITED WARRANTY

Price:$405.00

AirDog II 100 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

Price:$599.00

AirDog II 165 Dodge Cummins Quick Connect

Mon, 06 Feb 2012 21:29:22 +0000

Price:$753.00 Special Price:$632.00

AirDog II 200 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

Price:$740.00

Raptor 100 Dodge Cummins

Mon, 06 Feb 2012 21:29:22 +0000

HIGH END Gerotor Fuel Pump Featuring: - A Built in ADJUSTABLE REGULATOR; No Return Line Needed. - Single Piece Pump Body reduces number of parts, size and weight, NO leaky, messy gaskets! - Flow Rates of 100 GPH and 150 GPH. - ‘VacU’ Seal Technology puts Shaft Seals Under Vacuum Instead Of Pressure for Long Life. - Wire Screen in the Inlet Port for Added Protection. - Includes a complete Installation Kit With: No Drill Mounting Bracket, Wiring Harness, AND 1/2” Big Line Fuel Lines are Standard. - LIMITED WARRANTY

Price:$389.00

AirDog 150 Fuel/Air Separation System (QUICK CONNECT)

Mon, 06 Feb 2012 21:29:22 +0000

Product Description The AirDog® Fuel Preporator®, with the capability to provide fuel at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates that could damage or jam the gearator fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. The fuel, now under positive pressure flow, enters the filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the POSITIVE FUEL AIR SEPARATION FEATURES of the PATENTED FUEL PREPORATOR® the separated air/vapor is discharged from the filter through the Primary Air/Vapor Discharge Port and into the return to tank passage after the regulator. The fuel passing through the filter media {free of contaminates & power robbing air/vapor and at pressures and flows to meet the needs of the engine} exits the fuel filter through two passageways. The fuel for the engine, passes into the fuel pickup tube and out to the engine. The excess fuel not needed by the engine is released through the pressure regulator to combine with the air/vapor and foam as it returns to the fuel tank. The regulator controls the fuel pressure to the engine. Small & Compact: ONLY 7”L X 10”T X 3.2”W Dual Feed Gerotor Pump: Quiet, Efficient, Long Lasting!

Price:$590.00

Industrial Injection Silver 62 Trurbo- '03-'07 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

The Silver 62 is Industrial Injections latest effort to balance the demands of towing and performance. Much like the Super Phat Shaft 62 it was designed to handle multiple fueling upgrades and comes equipped with an extended tip 62mm compressor wheel. What separates the Silver 62 from the Super Phat Shaft 62 is their new technology 74mm turbine wheel. The identifying characteristic of the Silver 62 is the polished compressor housing. The Silver 62 uses a 14 cm exhaust housing in which they modify the angle of the exhaust nozzle, maximize the wastegate ports, and enlarge the wastegate chamber for full wastegate travel. Like all Phat Shaft turbochargers it is equipped with dual grooved high performance bearings and an adjustable boost elbow The Sliver 62 can support up to 650hp and is the best all-round turbo on the market today.

Price:$2,150.00

ISSPRO EV2 Fuel Pressure Gauge Kit 0-40PSI

Mon, 06 Feb 2012 21:29:22 +0000

Features: * No Amplifier box * LED lighting * Flat lenses * Stepper motor driven * Electric gauges * EV2 gauges include the items necessary for typical installation ISSPRO's EV2 Series matches your OEM gauges to a "T." LED lighting matches. Colors match. Fonts match. As a long time supplier to truck OEMs, we understand the importance of finely tuned design details. ISSPRO's EV2 has all the bells and whistles. Microprocessor-controlled stepper motor movements. LED back lighting. Precision senders. 270 degree sweep. All electric gauges. ISSPRO knows diesel. ISSPRO has been engineering and building diesel instrumentation for over 60 years. In addition to aftermarket performance gauge systems, we custom design diesel instrumentation for OEM customers. All ISSPRO gauges include the items necessary for typical installation. Pyrometers include lead wire and thermocouple with weather pack connectors. Boost and Temperature gauges include the sensors and wire harness to connect from the sensor to the gauge. No Amplifier boxes necessary. A lighting harness is also available as an EV2 accessory to adjust gauge lighting levels.

Price:$130.00

ISSPRO EV2 Pyrometer Gauge Kit

Mon, 06 Feb 2012 21:29:22 +0000

Price:$165.95

ISSPRO EV2 Turbo Boost Gauge Kit 0-60 PSI

Mon, 06 Feb 2012 21:29:22 +0000

Product Features: - EV2 Turbo Boost Gauge Kit 0-60 PSI - Black Face/Red Pointer/Black Bezel - Enhanced Visibility2 by ISSPRO - No Amplifier box - LED lighting - Flat lenses - Stepper motor driven - Electric gauges - EV2 gauges include the items necessary for typical installation - No Amplifier boxes necessary. - Lighting harness also available as an EV2 accessory to adjust gauge lighting levels

Price:$141.00

ISSPRO EV2 Transmission Oil Temperature Gauge Kit 100-280F

Mon, 06 Feb 2012 21:29:22 +0000

Price:$95.95

AirDog 100 Air/Fuel Separation System (QUICK CONNECT)

Mon, 06 Feb 2012 21:29:22 +0000

- Most Compact System Available for the Pickup Truck. Only 7” L x 3.2” W x 10” H - For Stock and Modified Engines! - Dual Feed Gerotor Pump: Quiet, Efficient, Long Lasting! - High Efficiency, Long Life Gerotor Fuel Pump - Lower Cost Replacement Filters - 3 and 5 Micon AirDog Fuel Filters Available *Stratapore Inside - Single piece pump body - "Vacu"Seal technology - Mounts to frame- no drilling required! - Relay Controlled Wiring Harness - Low Fuel Pressure Warning Light Available - Includes Wire Screen Water Separator - LIFETIME LIMITED EXPRESS WARRANTY

Price:$565.00

MAGNAFLOW 5" SS Turbo Back Exhaust 5.9L 04.5-07

Mon, 06 Feb 2012 21:29:22 +0000

MagnaFlow PRO Performance Diesel Exhaust comes with a Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last. Note: This is a TURBO BACK kit, Magnaflow's picture states cat-back which is an error.

Price:$656.95

Auto Meter Phantom II Series Pyrometer Gauge Kit

Mon, 06 Feb 2012 21:29:22 +0000

Air-Core meter movement. Includes Type K Thermocouple

Price:$176.95

Auto Meter Phantom II Series Boost Gauge

Mon, 06 Feb 2012 21:29:22 +0000

Includes 10 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fitting.

Price:$69.95

Auto Meter Phantom II Series Transmission Temp

Mon, 06 Feb 2012 21:29:22 +0000

Includes 1/8" NPT Sender. Air-Core meter movement. Includes 3/8"" NPT adapter/fitting. Includes 1/2"" NPT adapter/fitting. If mounting temperature sender in a steel fluid pan, use Auto Meter #2260 weld-in boss

Price:$73.95

Auto Meter Phantom II Series Transmission Temp

Mon, 06 Feb 2012 21:29:22 +0000

Full Sweep, Stepper Motor meter movement. Includes 1/8" NPT Sender. Includes 3/8"" NPT adapter/fitting. Includes 1/2"" NPT adapter/fitting. If mounting temperature sender in a steel fluid pan, use Auto Meter #2260 weld-in boss

Price:$153.95

Auto Meter Dodge Diesel A-Pillar Gauge Kits 03-09

Mon, 06 Feb 2012 21:29:22 +0000

Includes Phantom (white) Trans. Temp, Boost, and Pyrometer gauges.

Price:$380.95

AutoMeter Triple Pillar (Taupe)- '03-'09 Dodge Ram

Mon, 06 Feb 2012 21:29:22 +0000

Application(s): - 2003-2009 Dodge Ram (also for '02 1500)

Price:$71.95

Dual Pillar (Taupe) 03-09 Dodge Diesel

Mon, 06 Feb 2012 21:29:22 +0000

Application(s): 2003-2009 Dodge Ram (also for '02 1500)

Price:$63.95

Isspro EV2 Trans Oil Temp

Mon, 06 Feb 2012 21:29:22 +0000

Perfect match for 03-08 Dodge Ram

Price:$85.00

Isspro EV2 Fuel Pressure Gauge

Mon, 06 Feb 2012 21:29:22 +0000

Perfect match for Dodge Ram 03-07

Price:$131.00

MBRP Universal Muffler Delete Pipe (Single and Dual)

Mon, 06 Feb 2012 21:29:22 +0000

- Aluminized and stainless options - Single and dual exhaust options

Price:$39.95

Isspro Pyrometer EV2

Mon, 06 Feb 2012 21:29:22 +0000

Perfect match for 03-08 Dodge Ram!

Price:$162.00

Isspro 60 psi Boost gauge EV2

Mon, 06 Feb 2012 21:29:22 +0000

Perfect match for Dodge Ram 03-08

Price:$132.95

Isspro Rail Pressure Gauge EV2 Series 5.9L 03-07

Mon, 06 Feb 2012 21:29:22 +0000

No amplifier box required! EV2 Black Bezel, Red Pointer W/White Hub, White Face, Black Numerals Green When Back lit (Dodge) Fuel Rail Pressure 0-30000Psi

Price:$185.00

Aero Turbine 4040XL Resonated Performance Diesel

Mon, 06 Feb 2012 21:29:22 +0000

Designed to give your diesel truck an incredible performance increase while maintaining a tone that is similar to stock sound levels. The Aero Turbine XL 4040XL incorporates a resonator with the technology of the Aero Turbine Series 4040 into one unit.

Price:$149.00

Cold Air Intake System Stage 1 Dodge Trucks 5.9L 03-07 (Free Cleaning Kit)

Mon, 06 Feb 2012 21:29:22 +0000

This air intake system produces 15 max horsepower, 22lbs. x ft. torque and out-flowed the factory intake by 25%. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. Heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Price:$225.00

aFe Cold Air Intake System Stage 2 Dodge Trucks- 07.5-09 6.7L Pro Dry

Mon, 06 Feb 2012 21:29:22 +0000

This air intake system produces 5 max horsepower, 12lbs. x ft. torque and out-flowed the factory intake by 81%. Includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.

Price:$310.00

aFe Cold Air Intake System Stage 2 Dodge Trucks- 07.5-09 6.7L Pro Guard 7

Mon, 06 Feb 2012 21:29:22 +0000

Price:$345.00

aFe Cold Air Intake System Stage 2 Dodge Trucks- 07.5-09 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

Price:$315.00

Dodge Comp Box 5.9L 98-02 24 valve

Mon, 06 Feb 2012 21:29:22 +0000

The Edge Comp module maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters of your Cummins engine. The Comp module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp features five power levels with power gains from 40-120 horsepower. Each of the levels has five independent adjustable sub-levels to control low boost fueling, providing a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low boost smoke control no matter what additional power modifications have been made to the engine. The Comp module is fully adjustable on-the-fly and mounts inside the cab. The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Juice module. Power gains may vary based on vehicle and geographical location.

Price:$559.95

Dodge EZ - 1998-2002 Dodge 5.9L 24V

Mon, 06 Feb 2012 21:29:22 +0000

The EZ is the ultimate performance upgrade for the driver that wants affordable adjustability, added towing power, quick and easy installation, and improved fuel economy. The EZ offers a quick 10 minute installation that requires no expensive mechanic labor, no drilling, and no computer downloading. Simply plug the Edge EZ into 2 stock connections and you're ready to go. The EZ provides real power –you can switch between 3 power levels to add up to 65 HP. The EZ safely provides power to help eliminate downshifting. The EZ is also tuned with a special fuel economy level* that improves the atomization of fuel, which in turn allows Edge to add power, while at the same time delivering between a 5-10% improvement in MPG when driving in level one. Add to that the EZ's price point and you have the ultimate value on the performance market today. There is not another product on the market today that delivers power so safely and so economically, and at the same time is so easy to install. The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge EZ module. Power gains may vary based on vehicle and geographical location. Level 1: 20 Horsepower - 45 Foot Pounds of Torque Level 2: 30 Horsepower - 77 Foot Pounds of Torque Level 3: 65 Horsepower - 180 Foot Pounds of Torque *Increase in fuel efficiency varies based on driving style. Edge recommends the use of gauges when using any performance upgrade. CARB/EPA COMPLIANCE California Air Resources Board Executive Order D-541 This product meets the emissions compliance requirements of the California Air Resources Board and Federal Environmental Protection Agency and is legal for sale and use on pollution-controlled vehicles operated on public streets and highways. It must be installed and operated according to the instructions provided. (This E.O. number only applies to the 1998.5 and 1999 Dodge Cummins. Does not apply to the 2000 Dodge Cummins.)

Price:$439.95 Special Price:$389.00

MADS Smarty S-03 Programmer- '98.5-'02 Cummins 5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- CaTCHER'S software is inside - Ten different performance levels - Faster download in the industry, a typical ECM update takes less than two minutes - ABS tire height updates in just seconds - Not traceable in the stock setting- Smarty leaves no footprint - Cold weather 3 Cylinder High Idle is enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses to pull - USB built in for simple updates - Most complete keyboard in the industry - Reliable, works off your OEM hardware - Programmable Speed Limiter from 25 to 250 mph

Price:$649.00

Performance Management Tool 5.9L 03-07

Mon, 06 Feb 2012 21:29:22 +0000

• On-the-fly power level adjustment • Four different power levels available • Easy installation (20-40 minutes • Free internet updates and upgrades • Monitor and display vehicle parameters (PIDs) • Pyrometer included to measure EGTs • Full Color display with multiple color themes • User set daytime and nightime driving modes • Display current gear on vehicles with auto trans. • Vehicle specific tuning options • Initiate DPF burnoff on ‘08 GM and Dodge diesel • Defuel based on user set safety parameters • Test Vehicle Performance • Read and Erase Diagnostic Trouble Codes

Price:$998.95

Dodge EZ - 2004.5-2007 Dodge 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

The EZ is the ultimate performance upgrade for the driver that wants affordable adjustability, added towing power, quick and easy installation, and improved fuel economy. The EZ offers a quick 10 minute installation that requires no expensive mechanic labor, no drilling, and no computer downloading. Simply plug the Edge EZ into 2 stock connections, snap in the power adjustment switch, and you're ready to go. The EZ provides real power and adjustability – you can switch between 3 power levels to add up to 65 HP with a toggle switch. The EZ safely provides power to help eliminate downshifting while towing. The EZ is also tuned with a special fuel economy level* that improves the atomization of fuel, which in turn allows Edge to add power, while at the same time delivering between a 5-10% improvement in MPG when driving in level one. Add to that the EZ's price point and you have the ultimate value on the performance market today. The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge EZ module. Power gains may vary based on vehicle and geographical location. Level 1: 25 Horsepower - 50 Foot Pounds of Torque Level 2: 45 Horsepower - 75 Foot Pounds of Torque Level 3: 65 Horsepower - 150 Foot Pounds of Torque *Increase in fuel efficiency varies based on driving style. Edge recommends the use of gauges when using any performance upgrade. Not legal for sale or use in California on pollution-controlled motor vehicles.

Price:$427.95 Special Price:$389.00

Dodge EZ - 2003-2004 Dodge 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

Price:$415.95 Special Price:$389.00

Triple Dog Downloader 5.9L 03-07

Mon, 06 Feb 2012 21:29:22 +0000

SETTING POWER TORQUE Tow 66 95 Performance 94 106 Extreme 113 135

Price:$552.95

Triple Dog GT Diesel

Mon, 06 Feb 2012 21:29:22 +0000

FEATURES: - Huge horsepower and torque gains (over 100 hp) - Improved engine efficiency (fuel economy potential) - Four On-the-fly power levels - Safety Defueling - Loads of download features ie. Speedometer calibration - Display over 15 vehicle parameters (PIDs) - Read and Erase Diagnostic Trouble Codes (DTCs) - Vehicle Performance Testing (including drag tree) - Free Performance Testing Software for PC online - Exclusive Driving Coach feature, Patent Pending - Full Color display with multiple color themes - User set daytime and nighttime driving modes - Easy Installation - Free internet updates and upgrades - Initiate DPF burnoff on ‘09 GM and Dodge diesel Its all about tuning: Hold on tight because Bully Dog provides the best engine tuning in the market place. Our mainstay and the entire reason we are in this business is to provide high quality engine tuning aimed at improving your driving experience. Proper tuning is key to achieving that teeth gritting adrenaline pumping horsepower so we place our focus in tuning all applicable vehicle systems, not just peak horsepower. We tune vehicles to perform at every point in the RPM range and we always look to other areas of improvement such as the transmission so you can experience excellent performance in any driving situation you encounter.

Price:$594.95

Power Pup Dodge Cummins 5.9L, 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

The Power Pup Downloader is a programmer/tuner that downloads horsepower and performance enhancing programs into '03-'08 Dodge Cummins with either a 5.9L or '07.5 6.7L diesel engine in one SKU (stock keeping unit). The downloader offers up to three different Engine Tunes above stock to accommodate various driving conditions. Stock: Choosing the Stock engine tune will result in no change to engine horsepower output. All other downloader features can still be accessed if the Stock engine tune is chosen. Tow: This engine tune is recommended for use while towing, it is a mild tune that increases performance by 40 to 50 horsepower. This is the only tune that we recommend you tow with other than stock. Performance: This engine tune will yield up to 75 extra horsepower. Pyrometer and boost gauges are highly recommended while using this tune. Extreme: This engine tune ill yield up to 120 extra horsepower. Pyrometer and boost gauges are highly recommended while using this tune. This tune is not available for the '07.5-'08 6.7L engine.

Price:$509.95

Bully Dog Pyrometer Probe

Mon, 06 Feb 2012 21:29:22 +0000

The enclosed pyrometer probe if 5 ft in length with a two wire connection. Will work with Triple Dog GT Diesel, Triple Dog GT Gas, WatchDog, PMT and the Outlook monitor. This unit connects to the PCH board 40380 and is included in the 40390 Pyrometer Kit.

Price:$45.95

Bully Dog PMT (Performance Management Tool) 6.7L 07.5-10

Mon, 06 Feb 2012 21:29:22 +0000

The Performance Management Tool or PMT is an adjustable on the fly downloader, controller, monitor & gauge packaged into one unit. It is the premier tuning/monitoring product for diesel pickups in the automotive aftermarket. It is packed full of useful features for anyone who wants to increase the utility of their diesel pickup. The number one feature provided by the PMT is power; horsepower and torque improvements can be as high as 140 rear wheel horsepower and 200 lbs ft of torque, depending on the vehicle application. The side benefit of all that power is that it will improve the efficiency of the engine, PMT users notice dramatic improvements in fuel economy. With multiple on-the-fly horsepower settings (stock, tow, performance,extrme) the PMT will certainly fullfill your specific need for power. This power is totally functional for everday driving, towing, performance applications, and drag racing. The PMT has built in safety features that help regulate vehicle temperatures. The safety defueling feature in the PMT will keep an eye on the vehicle exhaust temperature, oil temperature, tans temp, etc, and regulate the overall horsepower to keep the vehicle within safe temperature ranges. The temperature ranges used by the defueling feature are user set; the user can deactivate this feature.

Price:$998.95

Triple Dog E3 Diesel Downloader

Mon, 06 Feb 2012 21:29:22 +0000

The Triple Dog E3 Diesel downloader is designed to provide added performance and economy. Everything packed into this product, from the engine tuning to the speed limiter function is designed to help users achieve better fuel economy and usable performance gains. This product was also designed to accommodate a lower price point, the price has been significantly reduced from our regular Triple Dog Product line. The Triple Dog E3 carries one engine tune to make things easy for the end user. That one engine tune is adjustable On-The-Fly, so the user can toggle back and forth between that tune and their stock power level, a matter of convenience. Engine Tuning * Stock: Choosing the Stock engine tune will result in no change to engine horsepower output. All other downloader features can still be accessed if the Stock engine tune is chosen. *Tow/Economy: This tune can be used for everyday driving and towing. Dynamometer testing results have shown a 50 horsepower and 100+ lbs. ft. of torque increase in rear wheel horsepower. Features * Over 20 different vehicle applications - view the complete Application Chart *Speed Limiter *Calibrate OEM Speedometer *DPF burn-off/ Mobile Desoot *Diagnostic Trouble Codes * '07 - '09 6.7L On fly Adjustment not available

Price:$373.95

DP MotorSports Dodge Leveling Kit

Mon, 06 Feb 2012 21:29:22 +0000

Simple solution for getting that horrible rake out of the front end. This will lift the front end a true 2" and not affect handling. We recommend a front end alignment when adding new tires. Spacers come triple bake powder coated gloss black. Spacers include SS hardware avoiding ugly rusted studs.

Price:$99.00

DP MotorSports 4.5" Lift Kit - '03-'08 Dodge 2500/3500

Mon, 06 Feb 2012 21:29:22 +0000

This Kit is designed to clear 35" tires. Kit includes upper and lower beefy 2" control arms. Pitman arm, Track bar drop bracket for use with factory track bar. Sway bar end link extensions. 5" spacers for factory spring ride quality. Blocks and zinc coated u-bolts in rear. 4 standard hydraulic shocks.

Price:$799.00

DP MotorSports Dodge 6" Lift Kit 2500/3500 03-08

Mon, 06 Feb 2012 21:29:22 +0000

Kit designed for 37" tall tires, will clear 37" Tire on 9" wide wheel. Kit includes upper and lower beefy 2" control arms. Pitman arm, Track bar drop bracket for use with factory track bar. Sway bar end link extensions. 6" spacers for factory spring ride quality. Blocks and zinc coated u-bolts in rear. 4 standard hydraulic shocks.

Price:$999.00

TS Performance Power Play MP-8 Module 6.7L 07+

Mon, 06 Feb 2012 21:29:22 +0000

•Easy Installation •Plug & Play •Undetectable •Does not leave fingerprint in the factory computer •Excellent Choice for towing •Does not increase exhaust temperatures & increases fuel mileage. The MP-8 offers a 2-4mpg increase! •In-Cab Adjustable •0 – 100 hp increase on Ford, Dodge & Chevy applications •0 – 50 hp increase on Jeep Liberty CRD & Dodge Sprinter Van •Stackable •The MP-8 is one of the most popular stacking modules on the market!

Price:$445.00

$40 REBATE or FREE DASH MOUNT!Edge Juice with Attitude CS - '07-'10 Dodge 6.7L

Mon, 06 Feb 2012 21:29:22 +0000

FEATURES • 6 On-the-Fly Adjustable Power Levels* • Full-color, high-resolution, 2.4 inch button-controlled screen (CS) • Up to an Additional 100 HP and 250 ft lb Torque* • Increase Fuel Economy* • Greatly Improves Drivability • Enhances Towing Performance • Excellent Throttle Response • Easy Instillation • Ships with a universal suction cup mount • Compatible with all Edge custom dash pods (sold separately). • Includes light sensitivity meter to dim screen as ambient light decreases • Internet Updateable (Attitude only) • Hot Unlock Codes available to unlock additional performance (additional fee and waiver required) Level 0: Stock Level 1: 25 Horsepower - 70 Foot Pounds of Torque Level 2: 40 Horsepower - 90 Foot Pounds of Torque Level 3: 50 Horsepower - 120 Foot Pounds of Torque Level 4: 65 Horsepower - 160 Foot Pounds of Torque Level 5: 80 Horsepower - 200 Foot Pounds of Torque Level 6: 100 Horsepower – 250 Foot Pounds of Torque** Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form. GAUGES When used with the Attitude CS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time. • Boost • EGT • Barametric PSI • Power Level • Speed MPH • Engine Coolant Temperature • Gear • Intake Air Temperature • Load% • Transmission Temperature • RPM • Percent Backdown due to high EGT or Boost SAFETY FEATURES • Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip* • Turbo Timer* (allows turbo to cool before truck shuts off) • Cold Engine Protection (no extra fuel is added until the engine is warm) • User-Adjustable Audible Alert Settings IMPROVED DRIVEABILITY FEATURES • Low-Boost Fueling Adjustment • Shift Defuel Setting* PERFORMANCE TESTING, ALERTS & RECORDS Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters. EXPANDABLE (items sold separately) • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories MYSTYLE™ SOFTWARE (included) MyStyle™ software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.

*Increase in fuel efficiency varies based on driving style. Note: The Juice with Attitude for the 6.7L Dodge Cummins is designed specifically for a standard truck platform and does not work on the chassis cab version. CARB certification pending. CARB E.O testing currently in progress.

Price:$932.95 Special Price:$829.00

S&B Cold Air Intake Kit- '04-'05 Chevy/GMC Duramax LLY

Mon, 06 Feb 2012 21:29:22 +0000

- Air Flow Rating: 49.1% Better than Stock - Efficiency Rating: 92.27% - Testing Conducted at Vehicle's Mat Rated Flow (649 cfm)

Price:$269.00

S&B Cold Air Intake Kit- '06-'07 Chevy/GMC Duramax LBZ

Mon, 06 Feb 2012 21:29:22 +0000

- Air Flow Rating: Flows 46.1% Better than Stock - Efficiency Rating: 99.27% - Testing Conducted at Vehicle's Max Rated Flow (649 cfm)

Price:$262.95

S&B Cold Air Intake Kit- '07-'10 Chevy/GMC LMM 6.6L

Mon, 06 Feb 2012 21:29:22 +0000

- Air Flow Rating: Flows 40.8% Better than Stock. - Efficiency Rating: 99.27% (ISO Course Dust) - Testing Conducted at Vehicle's Max Rated Flow (649 cfm)

Price:$269.00

S&B Filters Precision Cleaning & Oil Service Kit

Mon, 06 Feb 2012 21:29:22 +0000

*Quickly and accurately restore your high performance air filter to like-new condition. *Works on most high performance air filters brands. *Takes the guess work out of cleaning and oiling your performance air filter.

Price:$14.95

S&B Cold Air Intake Kit- '01-'04 Chevy/GMC Duramax V8-6.6L LB7

Mon, 06 Feb 2012 21:29:22 +0000

- Air Flow Rating: Flows 48.8% Better than Stock - Efficiency Rating: 99.27% - Testing Conducted at Vehicle's Max Rated Flow (649cfm)

Price:$269.00

NEW KITS AVAILABLE! ReadyLift Suspension Leveling Kit- Chevy

Mon, 06 Feb 2012 21:29:22 +0000

- Keeps your factory ride - Guaranteed - Forged Construction - 25% stronger than OEM - Guaranteed - Includes shock extensions to help keep that Factory Ride - Guaranteed - Will never wear, break or fail - Guaranteed - Toughest finish – Guaranteed - Safest way to level lift - Guaranteed - Torsion Key is forged for ultimate strength - Torsion Key safely raises trucks 2"- 3" and does not "over crank" torsion bar - Lifetime Warranty - Includes all necessary parts, hardware, detailed installation instructions, and two color decals

Price:$229.95 Special Price:$175.95

Tie Rod Reinforcement Kit 1500/2500HD/3500HD 00-10

Mon, 06 Feb 2012 21:29:22 +0000

ReadyLift's NEW 67-3156 Tie Rod Reinforcement Kits are designed to strengthen the slender OEM tie rods. Made from CNC-machined heavy-duty steel construction, these new tie rod reinforcement sleeves greatly increase the strength of the OEM tie rods which can bend or break under force from heavy wheels and tires. Off roading or aggressive driving with heavy off road tires can cause damage to the OEM tie rods. The thick walls of the 67-3156 steel sleeves thread onto the existing tie rod and provide support up the entire tie rod shaft. Will work with replacement OEM tie rods. Installs in less than one hour. If installed properly by following the detailed instructions, no alignment will be necessary upon completion. These NEW ReadyLift® Tie Rod Reinforcement sleeves are a MUST for any GM truck owner who has heavy off road wheels and tires.

Price:$89.95

Cognito 8-Lug 2"-3" Leveling System- '01-'10 Chevy/GMC Duramax

Mon, 06 Feb 2012 21:29:22 +0000

Cheaper leveling kits, don't waste your money! These GM models come with a hefty rake to them, lower in the front by at least 2", undesirable by many owners. Some owners would just like a small amount of lift in the front to be able to run a slightly larger tire. There are a number of companies out there selling a leveling kit that consists of new torsion bar adjuster keys, and claim that they will not affect the ride of the vehicle. This is a false claim. It is a fallacy that cranking the torsion bars up on a vehicle stiffens the ride. This just is not true, but cranking the torsion bars can affect other areas of the suspension system that will give a harsh ride. Just cranking the torsion bars, or adding the new adjusters preloads the suspension more to raise the height of the front of the vehicle. The problem is that the shocks and upper control arms bottom out to soon, giving the harsh ride. By cranking the torsion bars, you are not changing the spring rate of the torsion bars. There are also companies selling leveling kits that consist of the new torsion bar adjuster keys, and slightly longer front shocks. While this kit will ride better than the previously stated kit, you only gain a fraction of an inch of travel, because even though the shock is not bottoming out any more, the factory upper control arm is still bottoming out on the bump-stop way too soon, again giving a harsh ride. In fact, the torsion bar adjuster keys are not even needed in most cases, because the factory adjusters could have been turned up all the way to achieve the same ride height. Just purchasing the longer shocks would be a better investment than purchasing the new torsion bar adjusters. The Cognito Leveling Kit transforms your front suspension into a superior engineered design! Lets face it, you get what you pay for! The Cognito leveling system is engineered to transform the factory "almost good design", into a superior design by maximizing the travel of the factory independent front suspension on the 2001-2005 GM 8-Lug models. We create a better system in several different ways. 1. First, we offer either new shock brackets that replace the factory shock bracket that is bolted to the factory lower control arm, or aftermarket extended length shocks. If you are on a budget, the new shock brackets extend the lower shock mounting point so that the factory front shocks can be used and will not bottom out at full suspension droop. If you would like to upgrade your front shocks, we offer aftermarket replacements such as Pro Comp ES3000 or Bilstein 5125 series that are longer than stock and custom tune your front suspension dampening. 2. Second, we use replacement tubular upper control arms that relocate the bump stop on the a-arm to maximize the down travel of the front suspension. This allows the suspension to cycle without being prematurely stopped, and creating the harsh ride that occurs when just turning up the torsion bars, or changing the torsion bar adjuster keys. The Cognito tubular upper control arms use a polyurethane bump stop to provide a subtler stop, unlike the factory upper arms that use metal-to-metal stops. 3. The Cognito tubular upper control arms, correct the upper ball joint angle that is a problem with angles of the factory upper control arms after turning up the suspension. The alignment of the front end is also corrected so that it will fall into factory alignment specifications, something that is almost impossible on a truck leveled out with the factory upper control arms. 4. Last, the Cognito tubular upper control arms are supplied with bolt in upper ball joints. The factory upper control arms use a press in ball joint, and on some vehicles in order to change the upper ball joints, a new upper control arm with the pressed in ball joint must be purchased. Spend your money wisely! 8 out of 10 GM 8-lug vehicles do not even need new torsion bar adjusters to level out. Typically, with a Cognito leveling kit install, the factory torsion bar adjusters are turned all the way up, and thats it! If the vehicle happens to have torsion bars that have sagged more than normal, then new torsion bar adjuster keys are in order, and we carry those also. The Cognito leveling kits tubular upper control arms also work with our lift kit systems, so if you decide to go with a Cognito lift kit down the road, you are not losing out on your money now on this leveling kit. The upper control arms also have a dual lower shock mount built in, so if you ever want to run dual shocks up front, your mounting is half way there. No matter if you have a stock height 2001-2005 GM 8-Lug, the new torsion bar keys, cranked up your factory torsion bars, or the Cognito leveling kit, your steering system needs attention. The pitman and idler arm design on these vehicles has a premature wear problem, no matter if you are using GM components or aftermarket components. This failure will prevent holding a toe alignment on the front end, thus wearing tires abnormally. The problem can also cause tie rods to bind up and break, leading the owner to believe there is a tie rod problem when actually it is the pitman and idler arms that are the culprit. Cognito Motorsports has solved this problem with the pitman/idler arm support kit. It bolts on to the existing pitman and idler arms preventing the premature wear, and it tightens up a sloppy steering system. Highly recommended!!

Price:$471.50

MADS Smarty Junior SJ-67 Programmer- '07-'11 Cummins 6.7L (td) (HO not supported)

Mon, 06 Feb 2012 21:29:22 +0000

- CaTCHER software is inside - Three different performance levels : 40/ 70/ 100 hp - Improved fuel economy - Optimized drivability - fastest download in the industry, up to three times faster than the competition! (a typical ECM update takes about 5 minutes) - ABS tire height updates in just a few seconds from 22.5"- 44" - Manual High-Idle is enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses to pull - USB built in for simple updates from the internet - Easy installation! - Reliable- works off your OEM hardware - Programmable parameters for fine tuning - Power on Demand function

Price:$495.00

$40 REBATE or FREE DASH MOUNT! Edge Juice with Attitude CS- Dodge '04.5-'05 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

FEATURES • 6 On-the-Fly Adjustable Power Levels* • Full-color, high-resolution, 2.4 inch button-controlled screen (CS) • Up to an Additional 180 HP and 440 ft lb Torque* • Increase Fuel Economy* • Greatly Improves Drivability • Enhances Towing Performance • Excellent Throttle Response • Easy Instillation • Ships with a universal suction cup mount • Compatible with all Edge custom dash pods (sold separately). View/order Edge custom dash pods by clicking here. (sold separately) • Includes light sensitivity meter to dim screen as ambient light decreases • Internet Updateable (Attitude only) • Hot Unlock Codes available to unlock additional performance (additional fee and waiver required) Level 0: Stock Level 1: 25 Horsepower - 80 Foot Pounds of Torque Level 2: 40 Horsepower - 120 Foot Pounds of Torque Level 3: 60 Horsepower - 150 Foot Pounds of Torque Level 4: 80 Horsepower - 200 Foot Pounds of Torque Level 5: 100 Horsepower - 250 Foot Pounds of Torque Level 6: 180* Horsepower – 440* Foot Pounds of Torque Hot Unlock Code plus additional fee required for level 6. For pricing information and to get the unlock code you must complete a waiver located under hot unlock form. GAUGES When used with the Attitude CS monitor the unit is a comprehensive gauge package that stays mounted in the cab of the truck and displays up to eight from dozens of available parameters at a time. • Backdown % • EGT (exhaust gas temp) • Engine Load % • RPM • Speed MPH • Throttle position • Transmission Lock • Transmission Slip • Intake Temperature • Boost SAFETY FEATURES • Automatic Defueling to Prevent Excessive EGT, Boost and Transmission Slip* • Turbo Timer* (allows turbo to cool before truck shuts off) • Cold Engine Protection (no extra fuel is added until the engine is warm) • User-Adjustable Audible Alert Settings IMPROVED DRIVEABILITY FEATURES • Low-Boost Fueling Adjustment • Shift Defuel Setting* PERFORMANCE TESTING, ALERTS & RECORDS Performance and records 0-60 and quarter-mile times; quarter-mile MPH; peak engine temperature, RPM, speed and transmission temperature values. Sounds audible alerts when user-defined values are reached and automatically records the highest value of key parameters. EXPANDABLE (items sold separately) • Compatible with optional Edge Accessory System (EAS) to allow users to connect multiple, additional accessories MYSTYLE™ SOFTWARE (included) MyStyle™ software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CS or CTS unit for the ultimate in customizability.

Price:$829.00

MADS Smarty S-06 Programmer "Power on Demand"- '03-'07 Cummins 5.9L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- CaTCHER software is inside - Ten different performance levels - Fastest download in the industry, up to three times faster than the competition! (a typical ECM update takes about 3.5- 5 minutes, depending on truck model) - ABS tire height updates in just a few seconds - Not traceable in stock setting- Smarty leaves no footprint - Manual High-Idle is enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses to pull - USB built in for simple updates - Most complete keyboard in the industry - Reliable- works off your OEM hardware - Programmable speed-limiter from25-250 mph - Power on Demand

Price:$685.00

MADS Smarty S-67 Programmer- '07-'09 Cummins 6.7L (td)

Mon, 06 Feb 2012 21:29:22 +0000

- CaTCHER software is inside - Ten different performance levels - Fastest download in the industry- up to three times faster than the competition (a typical ECM update takes about 5 minutes) - ABS tire height updates in just a few seconds - Manual High-Idle is enabled in all software - Reads Diagnostic Trouble Codes in plain text - No tools required, no fuses to pull - USB built in for simple updates - FREE internet updates - Most complete keyboard in the industry - Reliable- works off your OEM hardware - Programmable speed limiter from 25- 250 mph - Programmable parameters for fine tuning - Power on Demand

Price:$685.00

PDR Killer Dowel Pin Kit

Mon, 06 Feb 2012 21:29:22 +0000

- Includes gasket, seal, and tab to prevent dowel pin from falling out

Price:$77.95

AFC Spring Kit

Mon, 06 Feb 2012 21:29:22 +0000

AFC Spring Kit

Price:$35.00

PDR Governor Springs 12v 5.9L 94-98

Mon, 06 Feb 2012 21:29:22 +0000

Piers Diesel Research governor spring kit.

Heavy Duty valve springs required if turning engine over 3200 RPM.

Price:$0.00

60LB Valve Springs 5.9L 12v 89-98

Mon, 06 Feb 2012 21:29:22 +0000

Options: - Set of 6 for exhaust brake - Set of 12 for 4k Governor springs. CAUTION: Engines intended to be operated over 3200 RPM should have these springs installed

Price:$55.00

S&B Filters Cold Air Intake Kit (Cleanable Filter)- '03-'07 Dodge 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 39.9% Better than the Stock Intake - 99.24% Efficient @ 642 CFM (ISO Course Dust) - Re-Oiling Amount for Filter: 41 grams: main element, 10 grams: power stack - Replacement Filter For Intake Kit: KF-1032 - Oil Color: Red - Part Number: 75-5033 - Filter Wrap Part Number: WF-1017 - Total Weight (including unit box): 11.69 lbs. - Unit of Measure: Each - Length of Unit Box: 19.5" - Width of Unit Box: 13.5" - Height of Unit Box: 15.5" - UPC: 841372031595

Price:$289.00

Dynomite Diesel Fuel Plate- '94-'98 Dodge 12v 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Great mileage and power - Allows the ability to play on the weekend - Plates have slotted holes - May be adjusted from 25-140 horsepower, depending on your current mods - Come complete with instructions, a boost elbow and a break-off bolt to replace the stock one in your pump.

Price:$209.00

Dynomite Diesel 3000/ 4000 RPM P Pump Governor Springs- '94-'98 Dodge 12v 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Comes with enough springs to be a 3000 or 4000 rpm kit. Now you can buy one set of springs and have both in case you need more rpm some day. - New, lower price. More product, less money! Click here for installation guide

Price:$149.00

Dynomite Diesel 5500 RPM Governor Springs- '94-'98 Dodge 12v 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- 60lb Valve springs required - Your truck should make at least 500 horsepower for these to work properly - Modified fuel supply is recommended - Some pumps (usually 160s and 180s) will idle erratically after the install of these springs - NOTE: 160hp and 175hp pumps require shim kit (DDP part# DDP624). Additional cost is $6.00 - 5000Rpm Governor Springs Require 60 Valve Spring Pacbrake #C14010)

Price:$259.00

Dynomite Diesel Delivery Valves- '94-'98 Dodge 12v 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Easy to change fuel delivery valves in the top of your injection pump - Will give you 20 more horsepower and less EGT and smoke when compared to 191s - Come packaged in a set of six, and include the delivery valve holder o-ring Click here to purchase the DELIVERY VALVE TOOL

Price:$247.00

Fabtech Leveling Kit- '05-'10 Ford F-250/350

Mon, 06 Feb 2012 21:29:22 +0000

- Features machined coil spring spacer mounts designed to level the vehicle front to rear - Quick installation - Requires longer shocks (Recommended: Fabtech Performance Front Shocks 7192)

Price:$108.00

Daystar 2.5" Comfort Ride Front Leveling Kit- '05-'10 Ford F-250/350/450/550 4WD

Mon, 06 Feb 2012 21:29:22 +0000

- Daystar Leveling Kits include only front lift components to level the stance of the vehicle. - High Density Progressive Polyurethane: It's an insulator. It absorbs the Noise, Vibration, and Harmonics (NVH) that come from the suspension and avoids transmitting them to the passenger compartment. - Lifts Vehicles Without Sacrificing Ride Quality or Load-Carrying Capacity - Easiest Way to Add 20"-22" Wheels and Increase Ground Clearance - No Metal-on-Metal Contact as with Other Leveling Kits - Maximum Recommended Tire Size: 33" - Limited Lifetime Warranty - Includes Front Lift Only to Level the Stance of the Vehicle - Longer front shocks absorbers are required; Scorpion Performance Shock Absorbers are available separately (KU01001 front, KU01016 rear) - Made in the U.S.A. - Top-Mount Easy-Install Design - Most late-model vehicles have gone to a strut type of front suspension. Most of Daystar's strut applications are a Top-Mount design, meaning that our components bolt to the top of the factory strut assembly. This type of leveling kit does not preload the factory coil spring, so factory ride quality is maintained, and installation requires only simple hand tools. - With torsion bar applications, we supply new forged torsion keys that meet or exceed factory specifications. These torsion keys have been re-indexed to increase ride height up to 2" and level the stance of the vehicle.

Price:$129.95

Daystar 2.5" Comfort Ride Front Leveling Kit- Camo- '05-'10 Ford F-250/350/450/550 4WD

Mon, 06 Feb 2012 21:29:22 +0000

Price:$179.95

S&B Cold Air Intake Kit- '98-'03 Ford Powerstroke 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 43.6% Better than the Stock Intake - 99.39% Efficient at 651 CFM (ISO Course Dust) - Replacement Filter For Intake Kit: KF-1042 - Oil Color: Red - Part Number Replaces: 75-2530 - Filter Wrap Part Number: WF-1020

Price:$269.00

S&B Cold Air Intake Kit- '94-'97 Ford Powerstroke 7.3L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 42.2% Better than the Stock Intake - 99.41% Efficient at 651 CFM (ISO Course Dust) - Replacement Filter For Intake Kit: KF-1041 - Oil Color: Red - Filter Wrap Part Number: WF-1019

Price:$269.00

S&B Cold Air Intake Kit- '03-'07 Ford Powerstroke 6.0L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 38.4% Better than the Stock Intake - 99.17% Efficient @ 612 CFM (ISO Course Dust) - Re-Oiling Amount for Filter: 68 - Replacement Filter For Intake Kit: KF-1043 - Oil Color: Red - Part Number Replaces: 75-2546 - Filter Wrap Part Number: WF-1021

Price:$269.00

S&B Cold Air Intake Kit- '94-'02 Dodge Cummins 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 40.5% Better than the Stock Intake - 99.81% Efficient at 653 CFM (ISO Course Dust) - CARB Exempt: Pending - Re-Oiling Amount for Filter: 87 grams on main filter, 17 grams on Power Stack - Replacement Filter For Intake Kit: KF-1035 - Oil Color: Red - Part Number Replaces: 75-1525 - Filter Wrap Part Number: WF-1023

Price:$269.00

K&N OEM High Flow Replacement Air Filter- '89-'93 Dodge 5.9L

Mon, 06 Feb 2012 21:29:22 +0000

E-1023 Product Specifications: - Product Style: Round Air Filter - Height: 9.25 in (235 mm) - Inner Wire: Yes - Inside Diameter: 4.5 in (114 mm) - Outside Diameter: 8 in (203 mm) - Top Style: Metal - Top Material/Finish: None - Filter Re-Oiling Amount: 4.3 oz (127 ml) - Weight: 4.3 lb (2 kg) - Product Box Length: 11 in (279 mm) - Product Box Width: 11 in (279 mm) - Product Box Height: 9 in (229 mm)

Price:$83.00

S&B Cold Air Intake Kit- '08-'10 Ford Powerstroke 6.4L

Mon, 06 Feb 2012 21:29:22 +0000

- Flows 23.4% Better than the Stock Intake - 99.48% Efficient at 593 CFM (ISO Course Dust) - Re-Oiling Amount for Filter: 78 grams on filter element, 9 grams on power-stack - Replacement Filter For Intake Kit: KF-1036 - Oil Color: Red - Filter Wrap Part Number: WF-1022

Price:$269.00

Sky Mfg. 4.5" Hanger Lift Kit- Ford Super Duty

Mon, 06 Feb 2012 21:29:22 +0000

- Includes all needed parts to complete the suspension kit: Sky Manufacturing 4.5" Hanger kit, drop pitman arm, pan hard drop bracket, adjustable pan hard bar, and a pair of Bilstein Gas shocks. - Hangers and panhard bracket are powder coated gloss black - 100% USA manufactured and labor - Bilstiens are brushed aluminium - Pitman arm is gloss black - Hangers and panhard bracket are laser cut, CNC formed, 1/4 and 3/16ths inch steel plate, and welded in machined fixtures for a perfect fit - Simple install with proper tools and decent mechanical skills

Price:$675.00 Special Price:$665.00

Sky Mfg. Adjustable Panhard Bar- '88-'97 Ford F350

Mon, 06 Feb 2012 21:29:22 +0000

- Heavy wall dome tube - Polyurethane bushings - Comes as raw steel

Price:$125.00

Sky Mfg. Adjustable Track Bar- Ford Super Duty

Mon, 06 Feb 2012 21:29:22 +0000

- Extra heavy duty and adjustable - Allow precise adjustment of the front axle under the truck when installing a lift kit or leveling kit - Larger sleeve used - Requires drilling your brackets to size if you have the smaller version. - This will 1 3/8 .250 DOM tubing machined with 1 inch joints installed. - Includes polyurethane bushings for solid steering control

Price:$139.00 Special Price:$134.00

Sky Mfg. Front Shackle Reversal- '92-'97 Ford F-250/350

Mon, 06 Feb 2012 21:29:22 +0000

- Available in 3 or 5 inch lift. - Longer shocks recommended to compliment this lift - Allows to fit an intercooler in the front cavity of the truck (ears of the hanger that sit on the inside of frame are now formed to eliminate spacers previously used) - All parts are laser cut, CNC formed, TIG welded - Primary hanger is .250 steel; shackles and pan hard drop are 3/8ths steel - Kit includes all needed hardware, bushings, and instructions - F-250 may require minor front frame horn modification to fit on some vehicles - Drop brackets are required if using a TTB front axle - Modifications needed if fitting to '88-'91 trucks If you would like to get carried away, we also can provide a drop pitman arm and new braided brake lines, though not needed.

Price:$330.00

Sky Mfg. Extended Steering Coupler- '99-'04 Ford Super Duty

Mon, 06 Feb 2012 21:29:22 +0000

- Machined from massive 1.5 OD hex rod - Full size locking jam nuts (These make stamped steel with coupler bolts pale in comparison!) - 2.5" of internal thread

Price:$99.00

Sky Mfg. 4.5" Front Spring Hanger Kit- '99-'04 Ford S.D. F-250/350 and Excursion

Mon, 06 Feb 2012 21:29:22 +0000

- Includes front leaf spring hanger, rear shackles, rear shackle hanger relocation bracket, and all hardware - All laser-cut, and comes in a durable black powdercoat finish - Fully USA made and assembled! Installation: Front hangers will directly replace factory hangers, removal of bumper is recomended. Support vehicle correctly, remove springs from hangers and shackle. Remove factory hardware and front leaf spring hangers. Install new hangers reusing factory hardware. Rear shackles are used in conjucntion with placing the shackle hanger currently inside the frame under the frame. Simply remove the shackles, unbolt shackle hanger from inside position, place under frame, reusing factory hardware as possible. The 2 shackle hanger brace plates will be installed with 1/2 inch spacer on bottom. Use longer 3/8-3 bolts and nyloc supplied hardware on lower spaced portion. Upper bolts are 3/8-1 with nyloc. After repositioning shackle hangers, install new longer shackles, reinstall leaf springs to factory specs, check all hardware, retorque after 500 miles.

Price:$295.00 Special Price:$282.00

New Products from Dunks Performance Store

AEV Fuel Caddy - JK (2007+ Wrangler)

S&B Cold Air Intake Kit - '10-'12 Dodge Cummins 6.7L

aFe ATLAS Exhaust System Turbo Back- '99-'03 Ford Diesel Trucks V8-7.3L (td)

aFe ATLAS Exhaust Muffler 4"ID Inlet/Outlet x 30" Overall Length

aFe Magnum FLOW OER Air Filter- '06-'12 Lexus

aFe MACH Force XP Exhaust Loop Delete/Y-Pipe Combo- '12 Jeep Wrangler V6-3.6L 4D

aFe ATLAS Exhaust System Turbo Back- '94-'97 Ford diesel trucks V8-7.3L (td)

aFe ATLAS Exhaust System Turbo Back- 94-02 Dodge Diesel Trucks L6-5.9L (td)

aFe MACH Force XP Down Pipe (Loop Delete Down Pipe)- '12 Jeep Wrangler V6-3.6L

aFe ATLAS Exhaust System Down-Pipe Back- '08-'10 Ford Diesel Trucks V8-6.4L (td)

Smittybilt Winch Cradle

Smittybilt Low Profile 4-Way Roller Fairlead for 8K-15K Winches

Nitro's Dana 30/Dana 44 Tube Sleeves

Nitro's Knuckle Gusset Kit w/ Lower Control Arm skids

Pro Comp Single Steering Stabilizer Kit- '02-'08 Dodge 2500/3500

Mag-Hytec Dana 60 High Capacity Differential Cover- '89-'02 Dodge 2500/3500

*$39 REBATE!!!* S&B Airflow Package- '98-'02 L6-5.9L

*$40 REBATE or FREE DASH MOUNT!* Edge Juice with Attitude CS- '06-'07 Dodge 5.9L 610 Series

*$40 REBATE or FREE DASH MOUNT!* Edge Juice with Attitude CS '98.5-'02 Dodge 5.9L 24V

*$25 REBATE or FREE DASH MOUNT!* Evolution CTS Diesel- Color Touch Screen

*$75 REBATE!!!* Superchips VIVID Performance Tuner- Ford, GM, Dodge, & Jeep

aFe Atlas Exhaust Race Pipe- '08-'10 Ford Diesel V8- 6.4L

aFe Power Stage 2 Air Intake System- '12 Jeep Wrangler JK V6 3.6L

aFe ATLAS Exhaust Race Pipe- '07.5-'10 GM Diesel Trucks V8-6.6L (td) LMM

Smittybilt Body Cladding- '07-'12 Jeep Wrangler JK

DP Leveling package- '05-'10 Ford F-250/350

H&S Black Maxx Race Tuner- Cummins/ Powerstroke/ Duramax

H&S Mini Maxx Race Tuner- Cummins/Powerstroke/Duramax

H&S XRT Pro Diesel Downloader- Cummins/ Powerstroke/ Duramax

H&S Video-in-motion Software for BlackMaxx/ MiniMaxx- '09-'12 Dodge

Sky Manufacturing Dana 60 6 Lug Conversion 15" Wheel Disc Brake Brackets

Sky Manufacturing Front Shackle Hangar Kit- '88-'97 Ford F-250/F-350

Sky Manufacturing Rear Shackle Kit- '88-'98 Chevy/GMC

Sky Manufacturing Solid Axle Conversion Leaf Hangar Kit- Chevy/GMC & '78-'79 Ford

Smittybilt G.E.A.R. Universal Truck Seat Cover

Smittybilt G.E.A.R. Rear Seat Covers- Jeep CJ, Wrangler & Wrangler Unlimited

Smittybilt G.E.A.R. Front Seat Covers- Jeep CJ, Wrangler, & Wrangler Unlimited

Smittybilt Factory Replacement Seats w/ Recliner- Jeep CJ, Wrangler, Wrangler Unlimited

Smittybilt Standard Bucket Seats

Smittybilt Low Back Bucket Seats- '55-'76 Jeep CJ

Smittybilt Fold & Tumble Rear Seats- Jeep CJ & Wrangler

Smittybilt XRC Seats- Jeep CJ, Wrangler, & Wrangler Unlimited

Smittybilt XRC Seat Covers- Jeep CJ, Wrangler, Wrangler Unlimited

Smittybilt Contour Sport Seats- Jeep CJ, Wrangler, Wrangler Unlimited

Smittybilt SRC Side Armor

Smittybilt SRC Side Armor JK

Smittybilt SRC Classic Rock Rails With Step JK

Smittybilt SRC Rocker Guards

*USED* EDGE Juice With Attitude Modue- '07-'09 Dodge 6.7L

PIAA 530 LED Fog Lamp Kit

aFe Power BladeRunner Turbocharger- '03-'07 Dodge L6-5.9L (td)

aFe Power Twisted Steel Header (1.5" Single Cat)- '91-'99 Jeep Wrangler I6-4.0L

aFe Power Transmission Pan- '94-'07 Dodge L6-5.9L (td)

aFe Transmission Pan Gasket

Bully Dog Heavy Duty WatchDog Multifunction Gauges

GenRight ELITE Coilover Suspension Package- Jeep TJ, LJ, YJ

GenRight Legend ALIEN Complete Build Package- Jeep TJ, LJ

GenRight Legend COMP Complete Build Package- Jeep TJ, LJ, YJ

GenRight Legend EXTREME Complete Build Package- Jeep TJ, LJ, YJ, CJ-7

Smittybilt JK Grab Handle- '07-'11 Jeep Wrangler/ Wrangler Unlimited

Smittybilt Winch Grab Handle

Smittybilt Fire Extinguisher Holders

Smittybilt CB & Phone Holders

Smittybilt Flashlight Holders

Smittybilt Drink Holders

Smittybilt First Aid Kits

Smittybilt Adjustable Door Strap

ATS Injector Nozzle, Stage 4 +200 hp - 2004.5-07 Dodge 5.9L Common Rail

TJ Rubicon Compressor Mount Bracket for BellyUp

Warn Winch Wireless Control System

Garrett Powermaxx Turbo- '03-'07 Ford 6.0L Powerstroke

Sky Mfg. Leveling Kit-'99-'04 Ford S.D. F-250/350 and Excursion 4x4

Muc-Off Split Second Deatailer Wax (1 qt.)

Muc-Off Wunder Shine Liquid Wax (16 oz)

Muc-Off Übershine Car Shampoo

Muc-Off Bug & Tar Remover

Muc-Off Glass Cleaner (16 oz.)

Muc-Off Wheel Cleaner (1 qt.)

Muc-Off Pre-Wax Cleanser (8 oz.)

$39 REBATE!!! S&B Airflow Package- '98-'02 L6-5.9L

$40 REBATE or FREE DASH MOUNT! Edge Juice with Attitude CS- '06-'07 Dodge 5.9L 610 Series

$40 REBATE or FREE DASH MOUNT! Edge Juice with Attitude CS '98.5-'02 Dodge 5.9L 24V

$25 REBATE or FREE DASH MOUNT! Evolution CTS Diesel- Color Touch Screen

$75 REBATE!!! Superchips VIVID Performance Tuner- Ford, GM, Dodge, & Jeep

USED EDGE Juice With Attitude Modue- '07-'09 Dodge 6.7L